Used Centrifugal Separator for sale (6,215)

Year of construction: 2003, condition: good (used), Coalescence separator Make Leiblein machine number 108 0014 Lredpfxjd Auu Ro Aqvsl clarification area 2,6 m capacity approx.160 litres Weight 150 kg

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Lrodpfey E S Evox Aqvol

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. Ledpfx Aoy Elwfeqvjrl - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Technical Data: - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. Lrodpfx Aqjxxirwjvsl 15 kW 400 V 50 Hz INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Lredpfx Aoxukh Eeqvjl Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for the MSE MSB010 Micro Centaur Plus Centrifuge The unit is in full working condition and is ready for immediate use Overview & Applications Lrodpfsxhfy Aox Aqvol Designed for in vitro diagnostic (IVD) use and routine medical analysis, supporting separations of mixtures, suspensions, and bodily fluids. Lightweight (≈ 5 kg) and small in footprint (≈ 220 × 270 × 180 mm), making it ideal for benchtops, cold rooms, and transport between labs. MedWrench Rotors & Accessories Compatible with a wide range of rotors, including: 24‑place 2 ml rotor 18 × 0.5 ml 12 × 2 ml PCR strip rotors Haematocrit capillaries (24 × 50 mm) MedWrench Summary The MSE Micro Centaur Plus (MSB010) combines high speed, compact design, programmable flexibility, and strong safety measures. It's a reliable, maintenance-light option with long-term part availability, making it a solid addition to lab environment

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit The unit is in full working condition and is ready for immediate release. The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments Key Features Performance Maximum speed: ~13,300 rpm Maximum relative centrifugal force (RCF): up to 17,000 × g, suitable for typical microcentrifuge applications. Timer: 1 min to 99 min, plus HOLD mode for continuous run. Lodpfx Asy Iw Dpoqvsrl Thermo Fisher Scientific Capacity & Rotors Standard capacity usually 24 × 1.5/2.0 mL microcentrifuge tubes. Multiple rotor options are available (e.g., dual-row for 0.5–2 mL tubes, hematocrit rotors, specialized sealed biocontainment rotors). Build & Usability Benchtop design: compact and space-saving for routine lab benches. Ventilated (non-refrigerated): designed for ambient-temperature operation. Intuitive controls: easy-to-read display for speed/RCF and run time; settings can be adjusted during runs. Safety features: impact-resistant housing, secure lid lock (won’t start until closed and can only be opened once rotor stops), and an emergency manual release. Quiet operation: around 56 dB(A), relatively low noise for a microcentrifuge

Condition: new, power: 27 kW (36.71 HP), Year of construction: 2025, Mizar Densimetric Separators efficiently separate materials based on their density differences. This technology is ideal for separating materials of different densities in recycling processes, offering superior performance, especially in applications where metals and plastics need to be separated. Ljdpfx Aqjwm Apnsvorl The DES Series is equipped with precise adjustment mechanisms and high-performance fan systems, optimized down to the finest detail. As a result, low-density materials collect at the back, while high-density materials like copper accumulate at the front, ensuring effective separation. In addition to energy efficiency and low operating costs, the automation systems and user-friendly control panels make the processes easy to manage.

Condition: new, Year of construction: 2025, inner diameter: 370 mm, inner dimension length: 1,300 mm, The Mizar Electrostatic Separator is a high-performance machine designed to precisely separate fine materials from mixed recycling streams. By utilizing electrostatic charging, it efficiently distinguishes between conductive and non-conductive particles, making it ideal for complex materials like plastics, metals, and minerals. ✅ High Material Purity – Ensures exceptional separation and product quality. Ljdpfxewbuyhs Aqvjrl ✅ Customizable Operating Parameters – Tailors to specific recycling needs and material types. ✅ Energy-Efficient – Optimizes energy consumption and reduces operational costs. ✅ Ideal for Final Stages of Recycling – Refines materials for downstream applications. ✅ Durable & Low-Maintenance Design – Built for consistent performance with minimal downtime. Technical Specifications Drum Length: 1300 mm Drum Diameter: 370 mm Heaters: 4 units, 1000 Watts each Drum Motors: 2 units, 1.1 kW each Feeding Screw Conveyor: 1.5 kW, with speed controller Vibration Motor: 0.37 kW, with speed controller Electric Components: Siemens Hydraulic Components: Bosch Rexroth 1 Year Guarantee

Condition: new, Year of construction: 2025, overall weight: 700 kg, power: 17 kW (23.11 HP), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. 🔸 Technical Specifications 🔹 ZZS M1 Lrjdpfxsv Hm I Nj Aqvjl Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg

Condition: good (used), Year of construction: 1969, 1 x Centrifuge Steimel S 3 Year of manufacture: 1969 with conical basket and lockable lid. The machine is in technically flawless condition. Technical data: Lodpfx Asu Ttrvoqverl Max. load: 50 kg / 20 l Speed: 1,000 rpm The machine can be inspected under power.

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. Lodeiniz Dopfx Aqvsrl * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Lredey Edfbspfx Aqvjl Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Lredpfxowayr Ts Aqvjl Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h

Condition: used, This listing is for Eppendorf Centrifuge 5804 The unit is in full working condition and ready for immediate use. High-performance benchtop centrifuge designed for medium- to high-throughput applications, offering precise speed control, quiet operation, and compatibility with a wide range of rotors for versatile lab workflows. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Lrodpfey Hwl Rex Aqvjl • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 pieces horizontal, axially split volute casing pumps in process design, with radial impeller, single-entry, single-stage. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft sealing: Double-acting Burgmann mechanical seal with flush water connection and flow meter Impeller diameter: 169 mm Pump speed: 2,950 rpm !!! ATTENTION !!! Operating parameters listed on the nameplate. Ljdpjfyn Rpefx Aqvorl They do NOT indicate the actual duty point performance!!!! I have uploaded 2 characteristic curves as photos. Photo 11: Duty point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87% NPSH: 2.17 Operating data for last application (approx.): Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07% NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 5.5 kW Energy efficiency: IE2 Voltage: 400/690 Volt Speed: 2,950 rpm Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology ! Price per unit !

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Lrodpowncv Rofx Aqvsl Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Lrodpfx Aexp Eqksqvsl Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series Lrsdpfxoyt Naxe Aqvol The units are in full working condition and are ready for immediate use The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Year of construction: 2025, condition: reconditioned (used), machine/vehicle number: C5623, Vertical axis basket centrifuge with top discharge, fitted with a bag, mounted on three legs (with tie rods and compression springs), used/second-hand. All parts in contact with the product are made of 316L stainless steel (except for the seals). Ledpfeynb Idox Aqvorl

Condition: good (used), Used Comi Cóndor HX / GMP 316L stainless steel Atex-rated horizontal centrifugal peeler. The unit features a perforated basket with a diameter of 1150mm. Maximum load 280kg, maximum cake capacity 222 litres. Internal design pressure rated at +0.5/-0.5 bar at 50°C. The unit is equipped with main drive, hydraulic powerpack, mounting springs and two control cabinets. Material: Stainless steel 316/316L Lredsynb Nuopfx Aqvsl Technical features Model: HX/GMP Maximum load (density 1.25 kg/dm³): 280 kg Condition: As is Manufactured by: COMI-CONDOR

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Manufacturer: Lima Lrsdpoy D Nl Rjfx Aqvel Model: RM 700 DSP Year: 2000 Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Condition: excellent (used), Year of construction: 2004, Sepamatic Sepa 2000 Separator SEPA 2000 separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Lrjdpfjy D H U Aox Aqvsl Model: Sepa 2000  Year: 2004 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300×1.300×1.700 mm Machine Weight: 1.400 kg.

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator * Type: Autosort NIR1 S2000 X-L Ledpfx Aqjywnf Nevjrl

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator * Type: Autosort NIR1 S2000 X-L Lrodpfx Aqoywnf Aevjl * Incl.: belt conveyor with length 5000 mm, * Beltwidth: 2000 mm.