Used Centrifugal Separator for sale (7,623)

Condition: used, Sorvall SLA-1500 We have two pcs in stock, price is for one pc only. Bedpoh E Di Iefx Airodi

Condition: used, centrifugal pump, water pump, stainless steel pump, food pump Bodeh Hbw Nepfx Airsdi -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 -Dimensions: 715/215/H265 mm -Weight: 37 kg

Condition: used, Hydraulic scissor lift table WEIDMANN, type E5/13-1 Manufacturer's No. 30403339, Year of manufacture 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift height max. 1280 mm Overall height - table in lowered position 290 mm Overall height - table in raised position max. 1570 mm Bdjdpehlnznofx Airji Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Rotary switch on the hydraulic unit for raising and lowering - Lowering speed can be adjusted continuously via a throttle valve - 1 lifting cylinder - Hydraulic unit, year of manufacture 2007, with tank positioned beside - Safety guard frame with limit switches Weight 660 kg Good condition

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Bdedpfschb Sbjx Airei Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: used, Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs Bdjdpfxeciq Dle Airji -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg

Condition: good (used), centrifugal pump, water pump -Motor power: 3 kW -Speed: 2850 rpm -Pipe connection inlet: DN Ø 64 mm Bdedpfsciq Dusx Airji -Pipe connection outlet: DN Ø 38 mm -Dimensions: 470/220/H430 mm -Weight: 41 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump Bedpoctq Rdsfx Airedi -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm Bdjdpfxeb A Ni Nj Airji -Max. flow rate: 2.0 m³/h -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

Year of construction: 1984, condition: good (used), centrifugal pump, acid pump, alkali pump -Motor power: 11 kW -Speed: 1440 rpm -Capacity: 40 m³/h -Pipe connection inlet: DN80 Bodob A R Iyspfx Airedi -Pipe connection outlet: DN80 -Dimensions: 1550/550/H550 mm -Weight: 240 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable Bdedpfxsb A S I Ho Airji The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (related to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h Bdedpfx Aedbwf Ieiroi Connection: G 1" Container volume: 50 liters Volume of the pre-adsorber: 3.2 liters Volume of the effective activated carbon adsorber: 8 liters

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Bsdpjdmqy Iofx Airodi Oil drain connection: DN 40 Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Condition: new, capacity up to 4 200 kg/h power 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 725 mm width 690 mm height 1 440 mm insertion resp. discharge height 1 440 mm weight 70 kg material 1.4301 / AISI 304 mash discharge height 470 mm suitable for pomaceous and stone fruit scope of delivery stand, 9 mm cutting screen Bdjdpfob I Sxkjx Airei

Condition: new, Elevator SA200 with centrifugal mill rotatable capacity up to 1 000 kg/h Bdjdpjb I Ucaefx Airji power: elevator 0,37 (0,5) kW (PS) mill 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 620 mm width 700 mm height 2 100 mm insertion resp. discharge height 800 mm weight 185 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 1 ½ “ outside mash discharge height 1 260 mm suitable for pomaceous and stone fruit, berries

Condition: new, capacity 1 500 l/h power 4,0 (5,44) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 930 mm width 550 mm height 1100 mm Bedpfx Ajb Nt Rmsirodi weight 425 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Bodpsb A I Dvsfx Airsdi Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system Bdsdpfx Aijb A I Iksroi The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg Bodouqf Iljpfx Airjdi

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Bjdpfsua Tbwex Airjdi Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Bdjdpfx Aijub Utdorei Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: good (used), Year of construction: 2023, Alfa Laval LKH-UP70 Centrifugal pump Bdodpsu N Hz Sefx Airei Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Bjdsuhzvljpfx Airodi Discs can be adjusted

Condition: used, functionality: fully functional, Jouan MR 23i Refrigerated Centrifuge with MA50C.13 Rotor. The Jouan MR23i centrifuge is a high-speed, high-capacity refrigerated multifunction centrifuge. With quiet operation and a compact footprint, the MR23i centrifuge is perfect for DNA and RNA molecular biology applications, as well as clinical and forensic labs. The Jouan MR 23i features an intuitive VIDEOset controller with graphic display of all parameters for quick and easy programming. Control Microprocessor Display VIDEOset software on 240 x 128 pixel graphic screen Speed Control 500 to 23,000rpm, ± 10rpm Max. Speed 23,000rpm (fixed angle); 4400rpm (Swing bucket) Max. RCF 36,668 x g (fixed-angle); 3074 x g (swing bucket) Timer 0 to 99 hr., 59 min., plus HOLD Memory 32 programs Bdsdpet U Sdujfx Airji Temperature Range -8° to +40°C, ±1°C Other Features AUTO-LOCK instant rotor change system, 10 acceleration and 10 braking profiles, individual password protection Dimensions (L x W x H) 63.5 x 58.5 x 36cm Net Weight 100 lb. (85kg) Good working condition. Please check out our other listings as well.

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Bdsdshtryxepfx Airji Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: new, Year of construction: 2025, 2 high-performance impeller wheels, Ø380, 11 kW each. Our impeller wheel is characterized by its high flexibility due to its ability to rotate both clockwise and counterclockwise. Our two-disc turbine ensures a stronger, more concentrated hot spot and more efficient blasting. Replacing the 8 impeller blades and the internal lining is easy and can be done without special tools or the need to disassemble the turbine wheel. All wear parts are made of high-quality materials for a long service life. A mechanical pre-acceleration of the abrasive ensures optimal utilization of the energy used. It also forms the heart of the blasting system: the efficiency and economy of the blasting system are decisively influenced by the efficiency of the impeller wheel. The impeller wheel is directly driven and, depending on the diameter, is equipped with 4-8 blades (Ø240, 4 pieces; Ø380-500, 8 pieces). High efficiency and maximum utilization of the energy used are thus guaranteed at all times. We will be happy to advise you! Bjdpfx Aehvmkxeirjdi