Used Sawblades for sale (128)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Fpedjw S Eylopfx Ag Rjb

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Fpodpfxsxliguo Ag Rsb Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Fpodpfxoxlfwpo Ag Rsb Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Fpsdpfxexiv Ugj Ag Rsb Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multirip Saw* DPPA II 50 510/120 Catalog number: 7307 TECHNICAL DATA - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of shaft with sawblades: 510 mm - Maximum sawblade diameter: 400 mm - Blade bore diameter: 70 mm Top: - Anti-kickback pawls - 2 driven, toothed feed rollers Bottom: - 2 driven, smooth feed rollers - Saw shaft - Driven, smooth feed roller - 2 feed speed ranges - Feed motor approx. 2 kW - Saw motor: 30 kW - Infeed roller table - Roller width: 700 mm - Overall dimensions (L/W/H): 3000 x 750 x 800 mm - Outfeed roller table - Width: 760 mm - Overall dimensions (L/W/H): 3100 x 900 x 800 mm - Machine dimensions (L/W/H): 1800 x 1500 x 1840 mm + electrical cabinet - Weight: approx. 3000 kg Fpodpox S Ip Rsfx Ag Rsb ADVANTAGES – Made in Poland – Roller tables included – Used machine, very good condition Net price: 35,900 PLN Net price: 8,540 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations) * MAR-MASZ warrants the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 1994, VOLLMER CHP 025 with Hollow face teeth and cheap breaker teeth device Fpedpfxjx Rrilj Ag Rjb

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter Fsdpju Nit Rjfx Ag Rjpb *

Condition: good (used), Year of construction: 2017, Sawblade tiltable 0-45 ° Length of the rolling table 3.200 mm cutting width 1.300 mm Motor output 7,5 kW Fedpox N Uhnsfx Ag Rspb Cutting height 105 mm Cutting height at 45° 72 mm Saw blade diameter max. 350 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, Fsdpfxexwyzgj Ag Ropb main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, Equipment: motor brake, scorer, Heavy-duty sliding table saw with scoring unit and motorized sawblade adjustment Technical Description Motorized sawblade tilt and height adjustment with digital display Belt-driven main sawblade with speeds of 3500/4500 rpm Heavy-duty weight ensures vibration-free operation Large outrigger table with material roller Parallel stop with round bar guide and digital position display Extendable aluminum longitudinal stop with two folding stops 7.5 kW main motor mounted on a robust cast iron frame Four-bearing sliding table made of anodized aluminum with high torsional rigidity Standard table extension and table extension made of heavy-duty sheet metal Large pendulum guard can be easily raised using a gas spring Quick and convenient sawblade changes thanks to the Rapid clamping system Multiple locking mechanisms on the sliding table Dimensions and Weights Fedpfx Ajwa I Upsg Ropb Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 850 kg Extraction connection Extraction nozzle diameter 120 mm Extraction nozzle diameter of saw blade guard 80 mm Electrical data Power consumption 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the saw blade 3200 mm Saw blade inclination 90 – 45 ° Max. cutting height 90° 140 mm Max. cutting height 45° 100 mm Saw blade diameter 400 mm Saw blade speed 3500/4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring saw blade diameter min. 120 mm Scoring saw blade diameter max. 125 mm Scoring saw blade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Fjdpov A Hgdsfx Ag Rspb Total power requirement 3 kw

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Fodpev Nhg Sjfx Ag Ropb Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Fedpeu Nimqofx Ag Repb Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: new, The heavy duty circular saw is suitable for cross cuts and longitudinal cuts. The rotary disc and the tiltable sawblade allow a large variety of applications, such as rafter cutting, ripping, mitre and straight cross cutting. It allows the production of valley- and hip rafter as well as the cutting of gutter boards and wedge blanks. Solid and easily adjustable saw unit for cutting heights up to 120 mm. Simultaneously adjustable rotary disc (up to 90°) and sawblade (up to 45°) User-friendly saw unit convenient for various cutting operations. Lever allows for cross cutting, saw unit travels from bottom to top. Fpjdpfx Agsvrv E Uj Rob technical data: Table size 715 x 945 mm Max. sawblade diameter 400 mm Max. cutting height 90°/45° 120/90 mm Table height 845 mm Moveable infeed roller table 1000 x 550 mm Moveable outfeed roller table 1000 x 550 mm Speed main sawblade 2800 rpm Dust extraction outlet 2 x 100 Motor power output S1 2,8 kW (3,8 HP) 400V Motor power input S6 3,9 kW (5,3 HP), 400V Dimensions 1350 x 1100 x 1180 mm Dimensions with roller table 3380 x 1400 x 1180 Weight approx. 210 kg Standard accessories: Carbide sawblade 400 x 30 x 3 mm, protective cover with dust extraction outlet, roller table, carriage, tool storage, fixed roller table, splitting wedge

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft Fsdevx Rcuspfx Ag Ropb – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 4,500 rpm, rotational speed (max.): 4,500 rpm, power: 4.5 kW (6.12 HP), sliding table length: 3,200 mm, Equipment: motor brake, scorer, Sawblade tilt and height adjustment are manual. Heavy weight ensures vibration-free operation. Large outrigger table with material roller. Parallel stop with round bar guide. Extendable aluminum longitudinal stop with two folding stops. 7.5 kW main motor mounted on a robust cast iron frame. Four-bearing sliding table made of anodized aluminum with high torsional rigidity. Standard table extension and table extension made of heavy-duty sheet metal. Large pendulum guard can be easily raised using a gas spring. Quick and convenient sawblade changes thanks to the Rapid clamping system. Multiple locking mechanisms on the sliding table. Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 800 kg Extraction connection. Extraction nozzle diameter: 120 mm Extraction nozzle diameter of sawblade guard: 80 mm Electrical data. Power consumption: 4.5 kW Connection voltage 400 V Fedpfx Aowa I Ezog Ropb Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the sawblade 3200 mm Sawblade inclination 90 – 45° Max. cutting height 90° 115 mm Max. cutting height 45° 80 mm Sawblade diameter 350 mm Sawblade speed 4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring sawblade diameter min. 120 mm Scoring sawblade diameter max. 125 mm Scoring sawblade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner agreed upon with you.#####

Condition: used, Universal grinding machine for planer blades, drills, etc. Manual feed Fedpsiwxdhefx Ag Ropb with 6 jaws chuck + perforated disc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Fsdpfxov A Hhho Ag Ropb Weight 29 kg Total power requirement 0,25 kw

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump * Fodpfx Agou Niuhs Ropb

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Fodpfxex H Ucts Ag Rspb Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Weight 700 kg Total power requirement 1,65 kw Fpedev A Hgqjpfx Ag Rob

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) Fodpfxou Niuzj Ag Repb for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 700x1000x1300 mm Fsdsvz Hz Sjpfx Ag Rjpb Weight 115 kg Total power requirement 0,5 kw

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! Fjdpfx Aowqplkeg Repb *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm Fpodpfou Nilyex Ag Reb cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *