Used Centrifuge for sale (963)

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Knodorrwclopfx Alyec

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Knedpfx Alj Adpt Nsyec Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H)

Condition: like new (used), Year of construction: 2020, As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H) Knodpfx Alj Adpugjyoc

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit 2 feed pumps 1 flocculant pump 1 flocculant preparation tank 1 electrical control panel Knjdpfxjz Icw Ae Alyjc

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Knedpfx Aoxhffrjlysc Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Year of construction: 2012, condition: ready for operation (used), Centrifuge / CEPA GZ 500 - Carl Padberg - CE marking - Year of manufacture: 2012 Kjdez R Uvfspfx Alysnc - Motor speed: 1400 rpm - Batch weight: 50 kg - Drum speed: 1400 rpm - Drum diameter: 542 mm - Drive power: &KW - Centrifuge & Separate control cabinet - Documentation Dimensions: L x W x H incl. control panel: 1.6 x 1.1 x 1.5 meters / Weight: 490 kg Errors and omissions excepted.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – Complete system including control system and accessories NEW PRICE: €330,000 For sale is a professional, vertical pilot plant centrifuge of the type HEINKEL V 500 TP in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and the integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly within the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Model: V 500 TP (Vertical Centrifuge) Year of manufacture: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Approval: CE marking available Documentation: Complete technical documentation Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated control panel (touch-HMI) directly on the machine Original HEINKEL accessories and tool case Kjdpfx Ajz Euz Islyenc

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Knedpfx Asxukkyjlysc Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: ready for operation (used), Year of construction: 1998, Ernst Schnabel - ALFA Centrifuge, Model -CE marking -Year of manufacture: 1998 -Drum volume: 27 liters -Drum diameter: 400 mm -Rotation direction: Clockwise -Permissible load: 25 kg Dimensions: L x H 0.7 x 1 meter / Weight: approx. 150 kg Knsdoy Uv Rhepfx Alysc Errors and omissions excepted.

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 5125781, Alfa Laval ALDEC 45 Decanter Centrifuge – For Sale Alfa Laval ALDEC 45 industrial decanter centrifuge in very good working condition. The machine has been well maintained and is suitable for continuous solid-liquid separation applications. Key Specifications: Manufacturer: Alfa Laval Model: ALDEC 45 Year: 2014 Machine / Serial No.: 5125781 Maximum Bowl Speed: 4,200 rpm Kedezu S Uyopfx Alyjnc Main Motor: Approx. 22 kW Back Drive Motor: Approx. 5.5 kW Bowl Diameter: Approx. 360 mm Processing Capacity: Approx. 3–15 m³/h, depending on feed characteristics and separation requirements Continuous industrial operation Heavy-duty stainless steel construction Location: Türkiye Condition: Very good, ready for operation Suitable for various industrial separation applications, including wastewater treatment, sludge dewatering, chemical processing, food processing and other solid-liquid separation processes. The machine is available for inspection. Additional photos, technical details and videos can be provided upon request.

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Ksdpfxoz Hw R Uj Alyonc Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.

Condition: ready for operation (used), Chip – Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500 mm - Speed / power: 1000 rpm, adjustable up to a maximum of 1400 rpm - Includes documentation & electrical diagram Knjdpfxszylzqe Alysc Dimensions L x W x H: 0.7 x 0.7 x 1.2 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2016, volume flow: 5 m³/h, overall weight: 4,900 kg, energy consumption: 35 kWh, peeling centrifuge 3000 rpm , 630 mm diameter bowl Knedpfx Asvm Ur Aslyoc

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Manufacturer: REITZ Type: KXE 050-035530-00 Kjdpfoz Innaox Alyjnc Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Driving force: 45 kW Throughput m³/h: V= 355 m3/min Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Price: On request

Condition: good (used), Year of construction: 2009, Equipment: documentation/manual, Name: Decanter centrifuge Manufacturer: Flottweg Type: Z4E-4/454 Year built: 2009 Driving force: 30 kW worm drive (backdrive): approx. 7.5 kW Permissible sediment density: 1,6 g/dm³ Max. bowl speed: 4.200 U/min Inner diameter drum: 420 / 240 mm Drive speed: Flottweg SIMP-DRIVE drive system (frequency converter-controlled) Material: Stainless steel 1.4463 Max. operating temperature: 0 - 100 °C Dimensions: (L x W x H): approx. 3.500 x 1.000 x 1.200 mm Empty weight: Approx. 3.000 kg Kjdpfxsz Ingcs Alyonc Technical doc.: Yes Message: Screw wear protection: Tungsten carbide / chilled cast iron Accessories: Control cabinet Condition: Used-good Price: By request

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Kedpfx Alszw Ucxjysnc Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Kodpfxjzw Ug Rj Alyjnc Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, RETSCH Ultra Centrifugal Mill / Laboratory Mill / Fine Grinding RETSCH ZM 200 Ultra Centrifugal Mill incl. DR 100 dosing unit and extensive accessories For sale is a used ultra centrifugal mill from the manufacturer RETSCH, including a DR 100 dosing unit and extensive accessories as shown in the pictures. The ZM 200 is suitable for rapid fine grinding of various materials and for use in laboratories, research, development, and quality control. Technical data ZM 200: Manufacturer: RETSCH GmbH Type: ZM 200 Equipment type: Ultra Centrifugal Mill Power connection: 1~ 200–240 V Frequency: 50/60 Hz Power according to nameplate: 1100 W Current consumption: 12 A Dimensions (L × W × H): approx. 515 × 410 × 365 mm CE marking Dosing unit: RETSCH DR 100 Dosing unit for controlled material feed with adjustable dosing speed Interfaces ZM 200: Connection for DR 100 RS232 RS485 Equipment: RETSCH ZM 200 Ultra Centrifugal Mill RETSCH DR 100 dosing unit Digital control and display panel Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts in various designs Several hoppers and stainless steel parts Further extensive original RETSCH accessories as shown in the pictures Application areas: Laboratory and research Fine grinding Sample preparation Material testing Quality control Research and development Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 dosing unit 1 × Operating manual ZM 200 1 × Operating manual DR 100 Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts Various hoppers, containers and accessories Kodpfx Aszxqhyslyjnc Further accessories as shown in the pictures Weight approx. 45 kg Condition: Used Signs of wear The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer further questions by telephone.

Condition: used, Grundfos CRN 32-8 Vertical Stainless Steel (INOX) Multistage Centrifugal Pump (30 m³/h, 121.6 m, 25 bar), Used Equipment Technical Data: Manufacturer: Grundfos Pumps (Made in Denmark) Type: CRN 32-8 A-F-G-V-EUBV Order / Serial No.: A96413268P3 03160001 Nominal Flow Rate (Q): 30 m³/h Nominal Head (H): 121.6 m Rated Speed: 2940 RPM Maximum Operating Pressure (Pmax): 25 bar / 90 °C Design: In-line configuration (suction and discharge connections aligned), flanged connections Features: Kedps Aa Rdnsfx Alysnc Fully stainless steel (INOX) hydraulic unit Very high operating pressure and pumping head capacity Reliable, durable industrial-grade Grundfos quality Overall Dimensions: Width: 380 mm Depth: 360 mm Height: 160 mm

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts Knodpfozhui Hex Alysc * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Knedpfjzgq Szox Alyec Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Knodpspu A D Aofx Alysc Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2025, condition: reconditioned (used), machine/vehicle number: C5623, Vertical axis basket centrifuge with top discharge, fitted with a bag, mounted on three legs (with tie rods and compression springs), used/second-hand. All parts in contact with the product are made of 316L stainless steel (except for the seals). Knsdpfxeynb Ide Alyoc

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Ksdozcybrspfx Alyenc Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Knodpfxsrgqm He Alyjc Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.