Used Ceramic for sale (1,063)

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. Hedpfx Asq I N H Njdwjfb 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate from Johannes Fischer Aschaffenburg Hsdpfsix Ahqsx Adwsfb in laboratory quality, 1000x1000mm Flatness less than 1µm (!) Incl. cabinet base with 2 doors Measuring protocol on request for an extra charge

Condition: used, total length: 40 mm, total width: 40 mm, total height: 40 mm, Ceramic grinding media pyramid Spaleck 40mm 3 bags, total weight 76.5kg Grinding media, ceramic grinding media, polishing media for vibratory finishing systems, trowalizing systems Hedpfx Adox Eczlowjfb Condition: used, good

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Hjdpfx Adexgb Nqswofb Good working condition. Please chech out out other listings as well.

Year of construction: 2018, condition: used, Horizontal kiln for ceramic slabs + fumes purifier for loading slabs 1800 mm Hfsdpfx Adox Ag H Hswsb length 140 meters

Condition: new, Year of construction: 2026, Discover our extensive range of high-quality and cost-efficient ceramic abrasive media for processing workpieces made of steel, stainless steel, or other hard materials. Ceramic abrasive media are known for their outstanding durability. Ceramic abrasive media are particularly suitable for machining hard materials, such as steel, but are also ideal for deburring aluminum components. Thanks to their higher weight, they exert increased pressure on the workpiece, ensuring excellent grinding performance. Compared to plastic media, ceramic media are significantly more durable and cost-effective. When selecting the appropriate abrasive media, finding the optimal combination of grinding performance, surface finish, geometry, and size is crucial. - Triangles & triangle-angle cut (D & DS): Perfect for deburring due to their edges, but also reach a variety of complex areas on the workpiece. - Tridents (DZ): Also access difficult-to-reach areas, such as grooves or gears. - Cylinders & cylinder-angle cut (Z & ZS): Their round shape makes them ideal for achieving a uniform surface finish during applications like polishing. Their slim design also makes cylinders easy to separate. - Ellipses & ellipse-angle cut (E & ES): Also suitable for polishing and smoothing; thanks to their corners, they can reach deeper sections of the workpiece. - Wings (W): Combine the advantages of triangles and tridents. Their 'wings' allow access to complex areas, while their compact shape and edges are ideal for deburring, applying good pressure to the workpiece. If you are interested, we look forward to hearing from you. We will be happy to provide you with advice, free of charge and without obligation. Hfsdpfxjx A Elbe Adwjb The European Commission provides a platform for online dispute resolution (ODR platform) for out-of-court settlements. This offer serves solely as an internet presentation of our goods. Contract negotiations are concluded via telecommunications (email, telephone, message portal). In the first step, we will send you a non-binding offer, informing you at the same time about our terms and conditions—including imprint—and your right of withdrawal, before any purchase or conclusion of contract is made.

Condition: good (used), Weld studs, ceramic rings, tip ignition studs, head studs Hfjdpfjmxpt Iex Adwjb -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Total weight: 64 kg

Condition: like new (used), Year of construction: 2019, operating hours: 150 h, functionality: fully functional, machine/vehicle number: AL-18-00113, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 820 kg, warranty duration: 12 months, compressed air connection: 6.1 bar, year of last overhaul: 2025, operating temperature: 20 °C, ALTERA S 10.10.8 portal measuring machine with NMC300 control, PH10M Plus rotary, Laser Scanner Ready and swivel head Hfodpfx Adenacxcjwsb Accuracies starting at 1.8µm+L/400, repeatability 1.6µm, speed 762mm/sec, acceleration 2.238mm/sec2. - Ceramic machine construction with granite table and base covering - Integrated Controller with monitor arm - incl. NMC300 control and SOLO hand box - Temperature compensation - Probe calibration D19mm calibration ball - CMM accuracy according to ISO 10360 - 10 years original accuracy guarantee - - 12 months of warranty - PH10M PLUS head with TP200 and ACR3 Changing Rack with MRS 600mm Rail + stylus set - PC with Win10 24" monitor - Camio Online software for tactile application Button configuration: - 1x PH10M PLUS pan/tilt head (A-5863-1000) - TP200 Probe including 3 days of training and commissioning of the system according to ISO 10360-2/5 Delivery term: EXW Photos show example images with various configurations Surcharge on the SP25 system for laser scanning e.g. with Nikon Laser LC15 including software and point cloud analysis: (on request) Anti-vibration possible for an extra charge. Other button configurations are possible. Other machine sizes are available. Just ask us. The machine can also be equipped with other software, e.g.: -Innovmetric Polyworks -CMM Manager

Condition: used, Stock of ceramic products from bankruptcy of importer. Hjdpfjxa Einox Adwsfb Originally about 3 full containers. Currently, at least 2 containers/truckload are needed.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, 90 CM 4-color Ceramic Printing Machine with Automatic Tension and Hydraulic Lifting System. Suitable for printing on cups, napkins, doner boxes, etc. Compatible containers for 16 oz and 26 oz are available, with an additional 28 containers included. Hfjdjxgfhkepfx Adwob

Condition: new, New ceramic rollers for tempering furnace for flat glass VESUVIUS long 3049 diam. 85 mm Hsdpfjtz T Rvex Adwjfb 46 pieces x 400€ = 18.400 €

Condition: new, Sanding belt width: 150 mm Sanding belt length: 2000 mm Grain size: 60 Hfsdpfogzvu Usx Adwob

Condition: excellent (used), Year of construction: 2019, Digital ceramic printing system for flat glass. Max. glass size: 2400 x 4200 mm. Working height: 940 mm. Total length: approx. 5630 mm. Max. Width of the machine: approx. 4800 mm. Hfedpoqlapzofx Adwsb Available from approx. end of January 2024.

Condition: used, Ceramic backings for wire electrode, welding wire, welding wire Hedpfxjd Idwfo Adwjfb -Weight: 10.2 kg -Number: 1x packages available -Price: per package -Weight complete: 10.2 kg/package

Condition: used, FICOLA furnace for ceramic 5m³ with tiles with wagons(1+1) with forklift truck handling wagons Hfjdpfxev Upwce Adweb

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Hodpfxjib H U De Adwefb Documentation and wiring diagrams are available

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Automatic machine for cutting and grinding most solid and stable materials. Hsdpfevxaa Aox Adwjfb Features Y-motion cutting disc, motorized X-arm and integrated recirculation and cooling unit. New cutting disc and water-free cooling fluid (oil) included.

Year of construction: 1981, condition: good (used), wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer Hfodpfxsvmq Iyo Adwsb -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg

Condition: used, FICOLA ceramic kiln 20m³ with tiles with wagons(4+4) with forklift truck handling wagons Hedpfx Adsv Upvlswjfb

Condition: new, 4 x Ceramic Jacketed Radiant Tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L = 1520 mm OD = 128 mm Find more items - new and used - in our shop! Hjdpfoghrmasx Adwsfb International shipping costs on request!

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Hfsdpfeh Rawuex Adwob Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Hedsx Sqm Sjpfx Adwsfb Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Hfedpfjx Trm Aox Adwjb Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz

Condition: like new (used), Year of construction: 2025, functionality: fully functional, controller model: DC241 EEC, workpiece height (max.): 3 mm, swivel angle A-axis (max.): 105 °, swivel angle B-axis (max.): 180 °, As-new Hexagon Global S Blue Coordinate Measuring Machine! TECHNICAL DETAILS Probe Interface (CMM): TKJ Probe Weight: 350 g Total Weight: 480 g Measuring Performance Probing Force: 5 µm Measuring Range: 2 mm Maximum Measuring Distance: 14 mm Resolution in Z-Axis: 66 nm Lateral Resolution: 6 µm Angular Acceptance: ±30 ° Max. Measurable Thickness: 3 mm Spot Diameter: 12 µm LED Area Light Illuminated Area: 780 × 780 mm Overall Dimensions: approx. 860 × 840 × 20 mm Weight: approx. 19 kg Load Capacity: max. 50 kg Stylus Shank Diameter: 3 mm Shank Length: 50 mm Ruby Ball Diameter: 5 mm Thread: M3 Angular Rotation Steps: 2.5° A-Axis: ±105° B-Axis: ±180° Rotation Speed: 90° in 2.5 s Max. Extension Length: 450 mm Recommended Drive Torque: max. 1.4 Nm Positioning Repeatability: 0.5 µm at 100 mm from the A-axis center MACHINE DETAILS Control System: DC241 EEC Control Compatibility: HH-C-V2.0, HH-CA-V2.0 with HR-R automatic probe changer rack Electrical Data Supply Voltage: DC 5 V to 6 V Current Consumption (normal): 50 mA Current Consumption (min): 30 mA Current Consumption (max): 150 mA (pulsed) Protection Class: IP40 (IEC 60529) Temperature Range: 16 °C to 26 °C EQUIPMENT Windows 10 Operating System Interactive 3D Graphical Capability Computer-Simulated Measuring Machine Environment Bidirectional Interface to CAD Systems: IGES, VDA, DXF, and STEP Processing of 2D, 3D, wireframe, and surface models Curve and Surface Scanning (CurveAnalyzer) Includes PC-DMIS-SHEETMETAL Functions for measuring thin-walled components Automatic White Light Probe – TKJ 2.5 HP-OW-2.14 Sensor Kit, incl. controller and reference sphere, Ø 30 mm, ceramic matte HP-SX1H Scanning Probe Sensor LED area light for mounting on the coordinate measuring machine Reference price mechanical frame for supporting the area light HP-CTS5.10 Optical Sensor HP-S-X1C/H Stylus Holder (1× M3) HH-C-V2.1 Controller HR-OW-2.14 Short End Cap HR-R3 Sensor Acceleration HH-CA-V2.0 Interface Active Probe Rack, HR-RA-65 HR-X1-3P Stylus Rack Reference Sphere, Ø 60 mm, ceramic, with stand M3 Stylus (R-5-SS-3.50) Stylus Tray Computer & Software PC-DMIS CAD++ PC-DMIS Operator Interface with order system Hodpfx Aox Sx Nusdwofb PC-DMIS CWS Interface PC-DMIS Probe Change Support Software PC-DMIS Vision for Tactile Sensors Touchscreen including computer system Desk for computer system

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,450 kg, Year of construction: 2018, operating hours: 3,950 h, Terex Cobra 230 impact crusher on tracks same as Powerscreen XH250 2018 year 3950 genuine working hours on John Deere John Deere 6068 194 kW 23450 kg Inlet[mm]:up to 860x720 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 150 Feed hopper 2,68 m3 Fitted with overband magnet Side conveyor and prescreem, can be bought. Wear plates 90% New blow bars martensitic-ceramic with double layer of ceramic(blue, RecyX) Machine in great working condition, can go straigt to work Hfodpjx S Hr Rofx Adwob