Used Ceramic for sale (1,045)

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Iodpfevddplex Aabetn

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" Itedpfowkf Ihjx Aabon - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: good (used), - All rubber rollers new or as good as new Isdpfxjulvipj Aabetn - Belt length 3000 mm - Year of manufacture - Price On request

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation. Iodpfx Aajxlk Nqjbstn

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Isdpfx Aasv Eguysbstn Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: ready for operation (used), Electric furnace REAG – 10 kW | 290V | 17.5A I will sell an industrial electric furnace from the renowned Italian company Reag, designed for applications requiring high temperatures, such as heat treatment of metals, firing ceramics, glass processing or laboratory work. Technical data: Power: 10 kW Voltage: 290V Current: 17.5A Connection system: Star (Y) Serial number: 1796 Manufacturer: Reag (Italy) Itedpfxjv Drpye Aabon Condition and use: The furnace is in good technical condition, fully functional and ready to work. It was used as intended in industrial conditions.

Condition: used, functionality: unexamined, machine/vehicle number: 109317625, working width: 762 mm, Main Technical Specifications Needle Gauge: 20 needles per inch Cylinder Diameter: 26 inches (66 cm) Number of Feeding Systems: 38 feeds Needle Selection: Electronic selection per needle via piezoceramic actuators with 8 levels Production Capabilities: Terry fabric with single or double loop height, jacquard patterns, and flat jersey Camtracks: Up to 4 camtracks for various knitting structures Speed: Maximum 150 revolutions per minute, depending on the type of knit Control System: Integrated "ORITEC" electronic control system with USB and Ethernet connectivity. Complete with accessories. Applications This machine is ideal for the production of: Wotol Terry fabrics with large patterns Single or multi-color jacquard fabrics Itjdjwt Rk Hopfx Aaben Knitted fabrics with relief effects Areas with low and high loops within the same pattern. Complete with accessories.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 8-disc glass grinding and polishing machine. In excellent working condition. 8 discs Itodpfx Aaov Szxgsben Glass thickness 3 - 35 mm Min. glass size 40X40 mm Speed 0.5 - 5m/min. Power: 19.5kW Power supply: 400V The machine is in excellent technical condition, can be viewed, tested, and purchased at a pre-arranged time.

Year of construction: 1998, condition: used, Power: 4 kW (6 HP) Manufacturer: CERAM Model: Ecovac 08-1 Type: Pneumatic transfer for bulk products Year: 1998 Motor power: 4.07 kW Suction capacity: 184 / 200 m³/h Iedpoxluu Dsfx Aabetn Suction pressure / vacuum: 3 / 3 mbar

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Itsdpoxf Ak Tsfx Aabjn Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: used, Year of construction: 2004, operating hours: 25,000 h, functionality: fully functional, input voltage: 400 V, total length: 5,000 mm, total width: 1,200 mm, total height: 1,200 mm, input current: 30 A, conveyor belt width: 1,000 mm, power: 20.2 kW (27.46 HP), Used drying tunnel for heat fixation, suitable for applications such as screen printing, DTG, and DTF, year of manufacture 2004, with the following specifications: Isdpexpgnkjfx Aabstn Belt width: 1000 mm, total length: 5000 mm, IR hood length: 2 x 2000 mm, infeed: 700 mm, outfeed: 300 mm, 400V, 50Hz, 20.2kW. The drying and curing tunnel is equipped with infrared ceramic emitters. The unit operates via a 32-amp connection. Condition is age-appropriate, with visible signs of use. However, the system runs smoothly and reliably. All functions are operational, and the unit was in use until recently. Inspection is possible at any time by appointment. Dismantling and transport of the drying tunnel must be organized by the buyer.

Condition: used, Year of construction: 2007, Adelio Lattuada Delta M4 Round corner grinding machine with 4 grinding motor Iodpfexfi Dyjx Aabstn

Condition: new, Year of construction: 2025, Set of blow bars martensitic with double layer of ceramic for Metso 1213 crusher. We can also offer high chrome with ceramic for this machine Itedpfxoihfc Sj Aaben All casting from EU foundries, best quality on the market We can also offer blow bars for all other machines like Tesab, Pegson, Rubblemaster, Hartl and many more

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Itjdpfeq R Tkwex Aabsn Max. Processing temperature [°C] 300

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work Itjdet Tqy Eopfx Aabon - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: good (used), Table with grinding device (edge delamination) and two integrated breaking strips. Isdpfx Ajxnl Sfoabjtn Width: 3700 mm Depth: 2430 mm Height: 970 mm Weight approx. 1500 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 3520244907047, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel tank capacity: 15 l, The MH 4M hot water high pressure cleaners are perfect for daily use of up to 6 hours for heavy cleaning tasks. Thanks to the improved EcoPower system, these high pressure cleaners are very efficient and quick to clean. Itedpfxjxny S Ts Aabon Service and maintenance work can be carried out very quickly as all important functions are easily accessible. The diagnostic function of the 4M high pressure cleaners indicates necessary maintenance work. This timely alarm reduces downtime. Four large wheels and ideal weight distribution make it easy to transport the high pressure cleaner on many different floors. Thanks to the jet pipe holder, the rotating hook for easy removal of the power cable and ideal storage of the cleaning agent tanks, the accessories are optimally stowed away. Together with easy access to all important functions, this high pressure cleaner achieves remarkable cleaning results and saves time and money. 4-pole motor, brass cylinder head EcoPower heat exchanger with EcoMode Internal diagnostic function Large water inlet filter to protect the pump from contamination 3 ceramic pistons Flow-controlled control system (not MH 4M-210/1000 X) Oil tank with oil level indicator Low pump oil level warning system Low fuel level warning system Easy to maneuver, supports for transport with forklift Technical data: Weight (kg) 149 Dimensions L x W x H (mm) 1010x700x1016 Fuel tank (l) 15 Pressure (bar/MPa) 210/21 Cleaning effect (kg/f) 5.5 Water output qmax/qiec (l/h) 1000/940 Max. inlet temperature (°C) 40 Water temperature (°C) 90/150 Power consumption (kW) 8.0 Electrical connection value (V/~/Hz/A) 400/3/50/13.5 Power cable (m)5 Ceramic piston 3 Pump speed (rpm) 1450

Condition: used, Year of construction: 2021, functionality: fully functional, BOTTERO COMBINED CUTTING LINE BOTTERO 548 LAM 61 – Year 2021 Automatic Cutting Table for Laminated Glass Jumbo size Thickness 2.2,0.38 PVB mm – 8.8,4.56 PVB mm Precision ±0.15 mm + BOTTERO 103 LC Ijdpfjxmhhmox Aabotn Connecting table with belts + BOTTERO 363 BCS EVO – Year 2021 Automatic Cutting Table for Monolithic Glass Max. dimensions 6100 x 3355 mm Shape cutting Thickness 2–19 mm Speed 140 m/min Accuracy ±0.15 mm Power 16 kW

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam OPTIONAL EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!! Ijdpfoq A Tyzsx Aabetn

Condition: used, Second hand Automatic shape glass cutting table (Regular), Bottero Type 352 BCS - R, Year 2006 Iedpfxjxpibme Aabjtn

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Itsdov D Rg Dspfx Aabsn Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, Year of construction: 2000, Load capacity: 1500 kg. Max. loading height: 1739 mm. Length: 1660 mm. Width: 1220 mm. Itjdowl Eizjpfx Aabjn Height: 2400 mm. Weight: 440 kg. Available quantity: 2 pieces

Condition: used, Year of construction: 2000, Load capacity: 1500 kg Max. loading height: 1740 mm Isdpfx Aaswl Ek Eebetn External dimensions for transportation: Length: 1680 mm Width: 1220 mm Height: 2370 mm Weight: 440 kg Available quantity: 7 pieces

Condition: used, Year of construction: 1998, Load capacity: 1500 kg Max. loading height: 1740 mm Iedpfxjwl E E Ne Aabetn External dimensions for transport: Length: 1690 mm Width: 1220 mm Height: 2400 mm Weight: 440 kg

Condition: good (used), Year of construction: 1995, Includes bending tool The machine can process: aluminium, Chromatec/stainless steel. Isdpfjxm Tn Eox Aabetn Suitable for moulds and models. 4-compartment profile magazine. Total length: 12,000 mm Max. height: 2,760 mm Depth: approx. 2,000 mm Weight: approx. 2,500 kg