Used Chain Trencher for sale (2,499)

Condition: used, Year of construction: 1990, Engine power: 2 hp Ijdpfsx Edl Sex Adwsht

Condition: used, Used chain cutter Isdpfxow Nab Ej Adwoht older model stationary version Availability: short term Storage location: NRW

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Ijdpfx Adowd Tgfoweht Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: new, Year of construction: 2025, Pile Driver YCR260 Iodpfsxzukqsx Adweht

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Iedpfx Ajtp S E Ejdweht Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Chain conveyor IDC000113 - total length: 30 m - width: 1 m - height: 850 mm Ihodevlc Ngepfx Adwet - electric motor: 11 kW

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Isdpfxev Eagve Adwjht

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW Iodpfx Asufib Redwjht - Chain conveyor with pushers after moulder or resaw.

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Chain conveyor for board packs Iedpfomrzthox Adweht - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW Iedei Sdk Sepfx Adwsht - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, Length: 6 m Chain conveyor for board packs: - Length: 6 m, - Between chains: 1,45 m/1,35 m, Ihjdpfx Adomu Tdyjwet - Rails: 3 pcs.

Condition: excellent (used), Catalogue number 7860 TECHNICAL DATA - Track width: 370mm - Roller width: 400mm - Saw blade diameter: 225-350mm - Bore diameter: 80mm - Max cutting height: 120mm - Table width with clearance: 670mm - Table length: 1650mm Top section: - Kickback devices - Slip-type steel feed roller - Kickback devices - Slip-type steel feed roller - Saw spindle - 3 pcs slip-type steel pressure rollers Bottom section: - Kickback devices - Track - Central lubrication - 2 feeding speed options + stepless adjustment, 1.5kW - Main motor: 30kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 2200x1550x2100mm Iedpfjx U Tmmjx Adweht - Weight approx.: 3000kg ADVANTAGES – Italian-made – Stepless speed adjustment – Upper control panel – With laser – Used multi-blade saw, very good condition Net price: 55,900 PLN Net price: 13,300 EUR (depending on exchange rate 4.2 EUR) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR Ihedpsx Tpudefx Adwet (Prices may change with greater fluctuations)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Ijdex R Thvopfx Adwjht Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Ijdpfxex Urb Ns Adwjht Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2021, SaeketaASP 631 F-WL(N) 800 for uniform sharpening of circular saw blades, with a pendulum head and four-axis control. Lakfam ASP-631 F sharpening machine. Isdpsyabvfefx Adwsht

Condition: excellent (used), Chain chisel KF20 With chain set Iedpjuhn Afofx Adwoht Chain chisel can also be used as a hand chisel

Condition: good (used), Year of construction: 1991, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley Ijdpfx Aex Tdwgedwsht -Manufacturer: Abus, electric chain hoist -Type: GM Load capacity 250 kg -Main stroke: 10.0 m/min -Fine stroke: 2.5 m/min -Chain length: 3 m -Transport dimensions: 550/340/H350 mm -Weight: 33 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Chain excavator WOODGRAIN GF-1500 max 12/15KM EXCAVATION DIMENSIONS 600 X 100 MM The WOODGRAIN GF-1500 chain excavator is a professional machine designed for excavating for cables, pipes, irrigation, digging trenches for water installations or irrigation systems. Thanks to its precision, speed, dimensions, it will easily perform excavations near fences or other objects, in hard-to-reach places even with very hard ground! Only one person is required for operation. Machine Specification CE Certificate, DTR: YES Engine Capacity: 420cc Fuel: Petrol Efficiency: 60m/h Digging Width: 100mm Digging Depth: 150,300,450,600mm Teeth: 27 carbide teeth Chain Length: 2000mm Ijdpfovzqk Rjx Adwjht Chain Speed(Max): 550m/min Tire: 145/7.0-6 Height: 1100mm Length: 2100mm Width: 720mm Gross Weight: 188 kg Engine technology: 4-stroke, Single cylinder, air-cooled, OHV (overhead valve) Displacement (cm3): 420 Cylinder: Cast iron sleeve Cylinder diameter (mm): 90.0 Stroke (mm): 66.0 max 3600 rpm Fuel tank capacity (l): 6.6 Oil system capacity (l): 1.1 Dry engine weight (kg): 31.0 Dimensions: length (mm): 499 Dimensions: width (mm): 370 Dimensions: height (mm): 443 Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine Features: OHV Technology - optimal performance guaranteeing longer engine life and greater fuel savings. Lo-Tone PRO Muffler - Lowest audible sound level (significantly lower DB) TWO air filters - no airborne contaminants into the engine (protection) Speed ​​control - regulates speed to provide more usable power in difficult conditions. Cast iron sleeve - reinforcement and durability, providing resistance to wear and overuse while improving oil control. Double ball bearings - provides additional durability and extends engine life. Float carburetor - the right amount of fuel, which improves engine start-up along with fuel economy High torque - more power, higher efficiency! Protective cover against ejection of excavation spoil

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Ijdswvv Rwspfx Adwjht Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Year of construction: 1993, Technical details: weight max.: 0,25 t total power requirement: 0,4 kW dimensions L x W x H: 0,56 x 0,25 x 0,25 m Electric chain hoist with manual control/hanging button -Drive unit group 1 Am -chain type DIN 5684-8 - 4x12 1Am; speed = 0,8 / 0,2 m/min. -hook size Ø 30mm, load capacity for max. 500kg, rope safety DIN 15401 -electric motor speed 2655 / 600 -rail support; running wheels: 4 pieces / 2 of them driven; Ø 63mm; running width 16mm; center distance 100mm; track width 140mm; flange 12mm Isdpsu Nvl Hefx Adwsht -insulation class F and protection class F We also supply 4x profile strips 32 x 30mm. *

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 2250 mm Ihodpfxod R Hrbe Adwet -Dimensions: 900/500/H160 mm -Weight: 35 kg

Condition: used, Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor Isdpfsgnnb Sex Adwsht -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 2000 kg Ihsdpfx Aod Ndi Tjdwjt -Chain length: 2.5 m -Dimensions: 730/230/H170 mm -Weight: 16.2 kg

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 3700 mm -Price: per piece -Number: 2 pieces Iedpfed R Hrcex Adwjht -Dimensions: 980/600/H160 mm -Weight: 47 kg