Used Chair Factory for sale (1,879)

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A Pgsdpfx Asyga Utsphsr • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. Podpfex Tn S Iox Aphjgr COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: used, 4 pieces of container wheels for ISO containers, container chassis Container castors, set of wheels for sea containers Manufacturer: presumably HAACON Total load capacity: approx. 24 tonnes Load capacity per piece: approx. 6 tonnes Wheel diameter: 360 mm Pgjdpexp R Hdofx Aphor Individual wheel width: 100 mm Total wheel width: 220 mm Height with container mount / clearance height: 540 mm Height to container support: 520 mm - Container locking mechanism for securing on the container corners - WICKE heavy-duty castors, heavy-duty cast rim with polyurethane coating, type 315/160 - Chassis steerable, can be locked with pin in 90° holes - 2 wheels per chassis - Ideally suited for moving containers on solid surfaces (e.g. factory floors) - without brake - without steering bar Weight per piece: 115 kg Total weight (4 pieces): 460 kg Very good condition

Condition: new, Year of construction: 2026, overall weight: 900 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, total width: 240 mm, total height: 250 mm, machine/vehicle number: ES-600EC, VASG KFT offers modern, high-quality, and functional modular container solutions across Europe, directly from the factory. We plan and design your container individually according to your specific wishes and intended use. 1. COMPANY & QUALITY STANDARDS History: Founded in 2020 as VASG LTD (Turkey), operating since 2023 as VASG KFT based in Hungary. Certified Quality: Production according to international standards (ISO 9001, ISO 14001, and CE marking). Direct Service: Direct sales to end customers from the factory, as well as Europe-wide wholesale (B2B). 2. TECHNICAL DATA & MODEL VARIANTS Product Name: ES-600EC Dimensions: Exterior 600 cm (L) x 240 cm (W) | Exterior Height 270 cm | Interior Height 250 cm (for a spacious room feel). Glass Model Variants (Showcase): Model A: Transparent glass (Standard). Model B: Tinted glass (Dark/Smoke). Model C: Mirrored glass (Spy-glass/Mirror effect). Custom Design: Layout, door/window placement, and interior design can be planned exactly according to your needs. Flooring: High-quality PVC flooring available in Wood-look or Anthracite. Facade & Color: Standard: Stylish sandwich panels in Wood-look. Options: RAL 9002 (Grey-white), RAL 7016 (Anthracite grey), or individual wet-paint finish in the color of your choice. Frames: Anthracite-colored PVC frames (Standard) or high-quality Aluminum frames (Option). Insulation (Panel Thickness): Standard: 50 mm EPS insulated sandwich panels. Upgrade: 80 mm or 100 mm thickness; choice of material between Polyurethane (PUR) or Rockwool. Electrical: Fully equipped including fuse box, LED lighting, 2 power outlets, 1 light switch, and an external 32A CEE industrial power connection (Plug & Play). 3. LOGISTICS, CUSTOMS & DELIVERY Manufacturing: Quality production in Turkey; (4–14 days) delivery is made fully assembled. Customs: Complete customs clearance for the EU is handled by VASG KFT. Delivery Times: DE, AT, IT, HU, Benelux, Balkans: 7–14 days. FR, ES, PT, UK, Baltics: 10–20 days. Unloading: On-site unloading (crane/forklift required, approx. 900 kg) is the responsibility of the customer. Service Note: Should you require assistance in finding a mobile crane service, we can provide contact details of partners in your area. Production and Shipment from Turkey directly to your Address! 4. PAYMENT TERMS & INVOICING Official invoicing is processed through our European headquarters, VASG KFT (Hungary). Pgedpeyr Sh Nofx Aphsr B2B (Corporate Clients): 50% upon order (Proforma), 50% before shipping. B2C (Private Customers): 100% prepayment upon order. Prices: All prices are plus VAT and shipping costs. 5. YOUR ADVANTAGES AT A GLANCE Additional Options: Air conditioning, heating, WC and shower units; individual dimensions available. Price Guarantee: Order now to secure the price and benefit from up to 3 months of free storage. Areas of Application: Ideal as an exclusive garden office, showroom, sales room, or stylish guest house. REQUEST A QUOTE: For an individual offer including transport costs, please send us your full delivery address and the desired model (ES-600EC Model A, B, or C). Custom manufacturing is available in various colors and dimensions. With kind regards, Your VASG Team

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data - Capacity: Up to 40 ppm (packs per minute) - Formats: 75cl – 3x2 - Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Pgjdpfx Aowgyx Tephor - Working table height: Adjustable from 0.9 m to 0.95 m - Electrical power: 30 kW

Condition: good (used), Large Frigoscandia GC92 spiral freezer available for sale. 880mm wide self stacking belt, 65mm product height. 22 tiers Enclosure footprint 10m x 8.2m. Has had new belt and rebuilt control panel (Mitsubishi screen) for a factory upgrade and not used very much since. Photos to follow. Pgjdew Rn Snepfx Aphsr

Condition: used, Conveyor belt, trough conveyor, trough feeder, presumably GASUS type FB 400 x 5500 Belt conveyor, transport conveyor, band conveyor Factory number: F, Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Pulley diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - Inlet hopper 600 x 400 mm Pjdjhz U Azepfx Aphegr - The support stations are 2-part trough-shaped - Metal support rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular frame made of steel - Cover plate above the conveyor belt, removable - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Pjdpfohm E S Aex Aphjgr Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Negative pressure: 2400 Pa The unit is in very good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF01, total height: 2,100 mm, total width: 1,100 mm, total length: 1,250 mm, manhole location: side, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 220 V, Automatic Beverage Juice Water Bottle Liquid Filling Machine Production Line For Factory is specifically designed for various liquid products, ensuring precise and efficient filling operations. It is ideal for a range of industries including beverages, foods, and personal care. This machine ensures high accuracy, operational efficiency, and compliance with stringent industry standards, making it perfect for B2B buyers such as wholesalers, cosmetics factory owners, import traders, and project contractors. Pjdjxumtqspfx Aphsgr

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZWP01, Equipment: CE marking, Automatic shrink sleeve labeling machine, this series of equipment is a fully automatic intelligent packaging line that integrates bottle feeding, bottle sorting, labeling, and shrink label functions. The design spirit of this equipment is true high speed, precise positioning, streamlined manpower, and perfect packaging. It is suitable for beverage and health food factories and has the functions of beauty, easy cleaning, and maintenance. Podpfx Asxum Tqephjgr The new steam shrinkage tunnel greatly improves the thermal shrinkage efficiency. It is easy to adjust and maintain for different and irregular bottle shapes such as round bottles, square bottles, and flat bottles, with smooth shrinkage. The steam spraying method adopts a separate steam drum design, and the pipeline is smooth and does not occupy space. The spraying outlet is divided into three sections on each side, and the height, front and back, and gas output of each section can be adjusted separately to achieve the most perfect shrinkage effect.

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Oghxp Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Psdpofz Difsfx Aphogr - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Psdpfx Apov Sthgjhogr Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Pjdpfx Ajv S Dihophjgr After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2007, condition: used, Circulation pump: Manufacturer Flaco Geräte GmbH, DE-33334 Gütersloh FZPII/D, Art. No. 4020 5780, Mfg. No. 01056 Performance: Pressure: 9.0 bar, Flow rate: 10 l/min 1-phase, 0.55 kW, 230 V/50 Hz 3.50 A, 1320 rpm, IP 55 Podshq Ricjpfx Aphjgr Expansion tank: Manufacturer Reflex Winkelmann GmbH & Co. KG, DE-59227 Ahlen Reflex No. / Mfg./Serial No.: 06G05194002, prEN 13831 2000 Permissible operating temperature: -10/120°C, Max. continuous operating temperature of the diaphragm: -10/70°C, 1.5 bar initial pressure (factory setting/site setting), 3.0 bar permissible Operating overpressure, 18 liters nominal volume.

Condition: excellent (used), Year of construction: 2004, Lovely Busch RA 0630 vacuum pump which has just come out of a closed factory. Mounted on its own stainless platform and has a control panel fitted. Looks much newer than 2004. Pgodpfx Apoi Exf Ashor

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Pedpfoi Riwxex Aphsgr Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder Podpfxsi Riywj Aphjgr 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co Pgodpsi Riy Tofx Aphor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 760 kg, maximum load weight: 1,740 kg, overall weight: 2,500 kg, axle configuration: 1 axle, tire size: 235 / 75 r 17,5, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis: Central axle trailer Fine-grained steel welded construction, including 4 mounting points for IBC containers, as technically feasible. In case of an order, customer approval of the drawings is required! 2 longitudinal beams as double-T beams for subsequent self-supporting structure with front crossbeam 2 pairs of lashing eyes for securing the IBC container Telescopic support leg at the front Chocks with holder Fenders without side impact protection Steel underrun protection Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch, suitable for freight transport Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension GFA or BPW axle, as selected by the manufacturer, with tapered roller bearing and S-cam brake Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and Tires 235 / 75 R 17.5 as selected by the manufacturer Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical System 24 Volt, multi-chamber lights, without yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear Pgodpfsi Ri Anjx Aphsr 2 x 7-pole non-interchangeable connectors at the front, with connecting cable Registration country/signs Registration country: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Painting Frame DB 7350 Novagrau 10-year warranty against rusting Attention! These are archive images. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver Pjdpei Ri A Ijfx Aphjgr "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Pgedpoi Ri I Nofx Aphjr Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear Pedpji Ri Nxjfx Aphogr 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Psdpfspg Er Nex Aphsgr

Condition: good (used), Kliklok Concorde K170 cartoner in nice condition. Has come from major UK food factory so has been very well maintained. Several change parts may be available with this machine. Pgedpfx Asnmv N Sjphsr

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 23,140 kg, overall weight: 28,000 kg, axle configuration: 2 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 800 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,538 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. --- ## Chassis – 2-Axle Jumbo Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * New slightly inclined outer frame with integrated Load-Lock profile for securing lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Free landing leg corner dimension / rear swing clearance approx. 1,920 mm * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards in front of and behind each axle * Spare wheel carrier for one spare wheel, including wheel mounting kit * Lockable plastic toolbox with shelf insert, dimensions: 620 × 360 × 440 mm (W × H × D), padlock not included --- ## Axles & Suspension * Drum brake axles (manufacturer's choice) * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension --- ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified maintenance * Spring-loaded parking brake * Front Duomatic coupling without connecting hoses * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 235/75 R17.5 tyres (manufacturer's choice) Pgjdpfjkv Uvzex Aphjr * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front socket without connecting cable --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * High point-load capacity, suitable for forklift axle loads up to 5,600 kg --- ## Front Wall * Front wall made of 25 mm aluminium hollow profiles, approx. 1,350 mm high * Heavy-duty steel corner posts in volume specification --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Aluminium front wall --- # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.