Used Chamber Furnace for sale (2,855)

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Chsdpezulf Ssfx Ai Rjd Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Cjdezvfluspfx Ai Rohd - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Chedpfx Aoz Nc Nnei Rjd Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: excellent (used), Combination unit: Smoking (hot smoking, cold smoking), heating, cooking, baking, drying. Automatic operation Core temperature measurement and control Chjdpfx Ajz N Irvei Rsd Cart included Fully functional Test run possible at any time

Condition: good (used), Year of construction: 1995, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE 800 Year built: 1995 Plate size: 800 x 800 mm Number plates: 75 Press content: Approx. 1.100 liters Filter area: Approx. 82 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Automatically Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Dimensions: L 6.965 x W 1.300 x H 2.022 mm Empty weight: 7.200 kg Technical doc.: Yes Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain Condition: Used-good Note: It will be available starting in August. Chsdpfezb Utyex Ai Red Price: By request

Condition: excellent (used), Year of construction: 2024, 532 USED Koma RDV - REC Freezing, cooling-proofing chamber. EXTERNAL DIMENSIONS (in cm): - W: 316 - L: 361 - H: 256 INTERNAL DIMENSIONS (in cm): - W: 300 - L: 345 Chedpfjz Dbk Tex Ai Rod - H: 240 TECHNICAL DATA: - year of production: 2024 - temperature range: -20°C to +20°C - refrigerant: R449A The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Chedpfx Aisz Dhm Uj Rod

Condition: new, External dimensions L x W x H: 1930 x 2080 x 2280 mm Configuration with 2 independent cells, each containing 2 trolleys, for a total of 4 trolleys. Additional dividers included for dividing into multiple cells. Equipped with 2 solid, single-door doors. 2 integrated 720 x 150 mm wall evaporators. 2 refrigeration units supplied, type CAJ 9513 or UN 9232, using R452A refrigerant. External height without floor: 2115 mm Doorway height: 1800 mm Dimensions suitable for 600x800 mm trays Compatible trolley dimensions: 700 x 890 x 1870 mm 2 independent cells with autonomous cycle management Cedpfx Aezk Hk Iei Rehd Capacity: 2 trolleys per cell (4 trolleys in total) Temperature range: -10°C to +35°C Modular structure without floor (installation on a perfectly level floor) Insulating panels, 60 mm thick, with high thermal performance Interior finish: food-grade aluminum Exterior finish: reinforced aluminum 2 wall evaporators, 720 x 150 mm Heating power: 2200 W Heater resistance: 80% 2 independent refrigeration units Position of units: low Environmentally friendly refrigerant: R452A Professional electronic control: Control Panel 2008 V2 Control panel type: cabinet Electrical supply: 220 V Single-phase – 16 A – 50 Hz 2 solid doors, 895 x 1360 mm Opening: 1 door per door Water drain: external diameter 32 mm Water inlet: 1/4 inch connection (above the chamber) Remote installation possible Delivered disassembled for easy access.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Chsdszlb D Sepfx Ai Rod Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Year of construction: 2017, condition: good (used), Lillnord Combi Room refrigerated chamber - used - year of manufacture 2017 - freezer room for 18 pallets, 60 x 80 (minus 18 degrees Celsius) - refrigerated room for 4-5 pallets, 60 x 80 (plus 6-8 degrees Celsius) - disassembled and stored in a warehouse Chodezn Iylepfx Ai Rsd - good technical condition - external cladding made of stainless steel - internal cladding painted - collection from the warehouse - price on request

Year of construction: 2020, condition: as good as new (ex-display), Lillnord Topline cooling and steaming unit - used - year of manufacture 2020 - demonstration unit - for 2 carts, 60 x 80 - computer control - perfect technical condition - 6-month warranty - dimensions: width 1,200 mm, depth 2,100 mm, height 2,562 mm Chjdpfxezn Izps Ai Red - collection from warehouse / shipping option available - price on request

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. Chodpfx Aieztvf Ts Rsd The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Cjdpfx Aiozt Idno Rohd Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with CoDeSys multitasking PLC For sale is a used industrial control system from the manufacturer STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment systems. Control, PLC, program management, and system visualization are combined in one system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC SE-604 power supply: 24 V DC (18–36 V) Power consumption: typically 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function System visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment systems Universal chamber furnaces Chedjz Nvkyspfx Ai Rsd Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and cable set as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Chedpfx Aez Ru Iyoi Red Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2003, functionality: fully functional, power of vacuum pump: 4,000 W, type of input current: AC, total length: 2,200 mm, total height: 2,145 mm, volume flow: 250 m³/h, total width: 1,140 mm, overall weight: 1,300 kg, We offer used Balzers BAK 760 physical vacuum deposition system, year of construction/refurbishing 2003. Year of major upgrade 2010. It is completely functional system for vacuum deposition of various optical materials on glass or other substrates. Elements of system are: - Vacuum chamber BAK 760 (760 mm maximum internal size) - Completely automatic deposition process, based on Windows real time software. - All process control system elements based on Profibus input/output modules. - 2x E-gun, max 10kW power, with 2 shutters - 2x Thermal evaporator, with 2 shutters - Knudsen planetarium system with 3 arms, increases deposition capacity >2x, increases homogeneity of deposition - Upgrade - ion assisted deposition system (2010) for denser layers - Two low vacuum pumps (Edwards 250 m3/h roots - main, Balzers 170 m3/h - backup) - Cold and warm water circuits included Csdpfx Aisz Tdlge Rohd - Glass substrate cleaning machine based on Miele laboratory glass cleaning device included. Cleaning system is high productivity and low work force requirement process. Capacity of one batch (75 minutes process time) of 100 x 50 mm substrates = 320 pcs. - Water purification system. 2 stage system. Stage 1. with simple regeneration process (salt). Stage 2. ion-exchange - external service regeneration. Good for >100 cleaning cycles. - RGA 200 - residual gas analyzer, from Stanford research included (for analyzing vacuum gases and leakages) - Number of stainless steel glass cleaning adjustable cassettes for substrates 25 x 25 mm to 120 x 100 mm and few for even larger substrates included. - And a lot of various tools, spare parts and consumables. All of above is preferably sold as fully functional system. Transfer to your site is demanding process and requires careful dismantling and setup on new location. Company setting up system on our production site can probably help with setup and testing on new site. Visits to current site of equipment highly is recommended and test of equipment on your process welcomed. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title Complete Glass Laminating Line PUJOL LAM/PRO T TRA (50x28) with Overhead Crane, Steel Structure & EVA Dispenser (2019) Key Technical Data Category: Glass processing machinery / Glass laminating ovens Manufacturer: HORNOS INDUSTRIALES PUJOL S.A. (Barcelona, Spain) Model: LAM/PRO T TRA Manufacturing Serial Number: 19/244 (Year of manufacture: 2019) Capacity / Max Glass Size: 50x28 (approx. 5,000 x 2,800 mm) Installed Heating Power: 182 kW Maximum Operating Temperature: 160 °C Operating Voltage: 380 V (3-phase) Certification: CE certified Condition: Used, excellent / very low working hours, fully assembled and ready for inspection Scope of Delivery & System Configuration 1. Multi-Chamber Vacuum Laminating Furnace: Brand/Model: PUJOL LAM/PRO T TRA Features: Multi-level EVA vacuum laminating chambers, high thermal efficiency, independent electrical control cabinet, and exhaust cooling fans. Cjdpfx Ae Af E S Dsi Rjhd 2. Hydraulic Scissor Lift Table:Rail-guided mobile lifting table designed for seamless loading and unloading across all furnace levels. 3. Overhead Crane & Supporting Steel Gantry Structure:Free-standing heavy-duty steel structure with runway beams and columns spanning the processing line. Overhead crane hoist for handling and positioning large glass panes. 4. PUJOL EVA Film Unwinding & Cutting Station:Dedicated freestanding foil dispenser unit equipped with pneumatic tensioning and an integrated operator control panel. 5. Auxiliary Assembly Tables:Multi-directional caster/roller conveyor tables for smooth pane alignment and transfer.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! Chsdpfxo Aa Aive Ai Rjd -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. Chsdpfx Aiefz U Hve Red This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-2, Filter plate specification: 390x390 mm Filtering area 2.8m2 Number of filter plate 14pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 35L Filtrate discharge Open type outlet Construction material for framework Main material for framework is SS 316. carbon steel. Contact parts in PVC or SS. Material of filter plate Material for Cjdpfx Aisb Dluyo Rohd chamber plate is PP Working temperature <90 ℃ Overall dimension 1695X750X630mm Weight 610KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Year of construction: 2025, operating hours: 20 h, condition: new, stainless steel construction for 1 Euro-Palette with a loadinghight of 1500mm max 40 crates with 400 x300 x300mm L x B x H Cjdpfx Aisclq Dqe Rjhd Chamberinsidedimensions: 1300x900x1800mm (L x B xH) Thickness of Insulation approx. 50mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 70 4 pcs. adjustable Feets Steamconsumption: approx.:. 50 kg / H at 1 bar electric power consumption: 4kW 16A / 5pol. / 400V

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature Chodpfx Aieclq Ixe Red electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm Csdpfx Aecdixloi Rshd useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Year of construction: 2024, condition: new, functionality: fully functional, Forced-air curing oven Powder coating oven NEW SLS-90/O * D+t Through-feed oven, divisible Working dimensions: 1400 width x 2000 height x 6500 depth Overall dimensions: 1920 width x 2810 height x 6800 depth Power supply: Electric Rated power: 90 kW Voltage: 380V Frequency: 50-60Hz Door type: 2 doors on each side - through-feed oven Anti-explosion lock Warm-up time: 15-30 min. (180 °C) Homogeneity: < ± 3 °C at 180 °C Max: < ± 3 °C Maximum temperature: 230 °C Transport: optional Air circulation: Forced air Heaters: Interchangeable roof heating panels Airflow: Vertical Fan: Radially mounted on interchangeable panels Chjdpfx Aiocutrlj Red Door: Double, two doors on two sides (through-feed oven) Divisible Motor power: 1.1 kW Capacity: 6480 L Warranty: 12 months GERMAN-SPEAKING CONTACT PERSONS IN GERMANY FEEL FREE TO INQUIRE Delivery time: approx. 12 to 16 weeks after order Shipping costs are calculated individually. We also offer systems tailored to your requirements. More information at Romer Germany Powder coating, electrostatic painting, Powder Coating, Powder painting, plastic powder, Peinture en poudre, thermoplastic, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування, powder coating booth powder coating system powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder coating oven industrial oven INDUSTRIAL OVEN, forced-air curing oven, powder coating oven

Condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7 Chjdpog E S Insfx Ai Rjd