Used Chamber Furnace for sale (2,858)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). Codpfoz Ru Iyox Alfshd The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2003, functionality: fully functional, power of vacuum pump: 4,000 W, type of input current: AC, total length: 2,200 mm, total height: 2,145 mm, volume flow: 250 m³/h, total width: 1,140 mm, overall weight: 1,300 kg, We offer used Balzers BAK 760 physical vacuum deposition system, year of construction/refurbishing 2003. Year of major upgrade 2010. It is completely functional system for vacuum deposition of various optical materials on glass or other substrates. Elements of system are: - Vacuum chamber BAK 760 (760 mm maximum internal size) - Completely automatic deposition process, based on Windows real time software. - All process control system elements based on Profibus input/output modules. - 2x E-gun, max 10kW power, with 2 shutters - 2x Thermal evaporator, with 2 shutters - Knudsen planetarium system with 3 arms, increases deposition capacity >2x, increases homogeneity of deposition Cjdsz Tdlgjpfx Alfjhd - Upgrade - ion assisted deposition system (2010) for denser layers - Two low vacuum pumps (Edwards 250 m3/h roots - main, Balzers 170 m3/h - backup) - Cold and warm water circuits included - Glass substrate cleaning machine based on Miele laboratory glass cleaning device included. Cleaning system is high productivity and low work force requirement process. Capacity of one batch (75 minutes process time) of 100 x 50 mm substrates = 320 pcs. - Water purification system. 2 stage system. Stage 1. with simple regeneration process (salt). Stage 2. ion-exchange - external service regeneration. Good for >100 cleaning cycles. - RGA 200 - residual gas analyzer, from Stanford research included (for analyzing vacuum gases and leakages) - Number of stainless steel glass cleaning adjustable cassettes for substrates 25 x 25 mm to 120 x 100 mm and few for even larger substrates included. - And a lot of various tools, spare parts and consumables. All of above is preferably sold as fully functional system. Transfer to your site is demanding process and requires careful dismantling and setup on new location. Company setting up system on our production site can probably help with setup and testing on new site. Visits to current site of equipment highly is recommended and test of equipment on your process welcomed. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO Codo Aa Aivepfx Alfohd -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace

Condition: good (used), Year of construction: 2006, Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Chodpfx Ajhgkdqslfsd Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Condition: new, 4 x Ceramic sleeve nozzles 514736 4 x Ceramic sleeve nozzles 514736 L = 1520 mm, OD = 128 mm Cedpfxeghrmas Alfehd You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW Cjdpfx Aleim Ik Sjfehd You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: used, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Chodpfx Aoh Rvh Sslfed Support for product development, design, and quality control Detection of potential problems during the development phase Quality and safety control Endurance testing stand Temperature control Mobile on rollers Forklift access pockets 400 VAC, 3-phase, 50 AMP IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Weight: 390 kg Csdpfsu Ecrxjx Alfohd More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: refurbished (used), power: 45 kW (61.18 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, number of chambers: 1, Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Height: 450 mm X Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Codpfotukp Esx Alfohd Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Condition: used, Weiss climate testing chamber, -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Supply voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Cjdoph U Ayjpfx Alfshd Refrigerant: R 404A Used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 - 32-bit technology - Graphical display of setpoint and actual values - Digital display of setpoint and actual values for temperature and relative humidity (%) - Digital input for temperature (°C) and relative humidity (%) - Integrated programmer - Program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 Climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm More climate chamber items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Chjdowbdv Sepfx Alfod Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC Chjdpfjxpuahsx Alfsd procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: excellent (used), functionality: fully functional, NESS Smokehouse Chamber Installation with Cooling Shower and Smoke Generator Complete NESS smoking installation, designed for thermal processing, smoking, and cooling of meat products. The set includes smokehouse chambers of various capacities, a cooling shower, a wood chip smoke generator, and a condensate tank with Grundfos circulation pumps. The set includes: 1. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 2. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Chodpfxexq Rt Hs Alfed Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 3. NESS Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1100 × 1100 × 2000 mm External dimensions: 1500 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 4. Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1030 × 1120 × 2000 mm External dimensions: 1350 × 1420 × 3050 mm Control cabinet: ADITEC MIC 200F, 350 × 200 × 550 mm No door 5. NESS Cooling Shower for 2 smoking trolleys Internal dimensions: 2300 × 1170 × 2060 mm External dimensions: 2400 × 1350 × 2700 mm Control cabinet: NESS Duschmatic, 380 × 230 × 380 mm 6. NESS Wood Chip Smoke Generator Dimensions: 900 × 550 × 2400 mm 7. Condensate tank with 2 Grundfos circulation pumps Tank dimensions: 1100 × 1150 × 1200 mm Pump dimensions: (2×) 250 × 200 × 600 mm The NESS installation is an advanced smokehouse system enabling a complete technological process: smoking, cooking, cooling, and drying. The chambers are equipped with independent control cabinets featuring the Digitronic RF3 D-N system for precise process parameter management. The Duschmatic cooling shower allows for rapid and uniform cooling of products after the smoking process. The wood chip smoke generator and the condensate system with Grundfos pumps ensure reliable and hygienic operation of the entire installation.

Condition: used, Year of construction: 2009, We offer for sale 5 professional FESSMANN cooking chambers designed for intensive use in meat processing plants. Each chamber holds 2 trolleys, ensuring high steaming efficiency. The chambers are equipped with NESS Digitronic 4 electronic controllers, allowing precise setting of temperature and time parameters. The stainless steel construction guarantees easy hygiene maintenance and a long service life. Cedpfx Ajxfizxslfjhd Technical specifications: Manufacturer: FESSMANN Year: 2009 Number of chambers: 5 Number of chambers trolleys: 2 trolleys Control: NESS Digitronic 4 Dimensions: Width 150 cm, Depth 220 cm, Height 240 cm Intended use: steaming meat products Condition: very good, used Construction: stainless steel The ideal solution for medium and large meat processing plants looking for reliable, high-efficiency steaming chambers.

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Chjdpfx Alex Exmtjfsd Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Cjdjy Ua Rxepfx Alfjhd Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Chedpfx Ajzd R Tgslfed Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Chjdpfx Aszd R Uwjlfod Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch VTSR 7034/S Climate Testing Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Chsdpfx Alouuif Nsfed Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Year of manufacture: 2002 TK-11 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Vötsch VC 0150 Climate Testing Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climate testing chamber Voltage: 230 V Rated power: 1.5 kW Volume: 1540 liters Temperature range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor controller List price: €19,500 KK-09 You can find more items – new and used – in our shop! Chedpfjuuikfsx Alfsd International shipping costs available upon request!

Condition: excellent (used), Combination unit: Smoking (hot smoking, cold smoking), heating, cooking, baking, drying. Chodoz N Irvspfx Alfsd Automatic operation Core temperature measurement and control Cart included Fully functional Test run possible at any time

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Technical details: Size range: 450x350x300 up to 1200x800x800 Chjdpfst D Tkusx Alfsd Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: used, Year of construction: 2017, machine/vehicle number: 930048019, power: 32.8 kW (44.60 HP), input voltage: 380 V, total length: 2,878 mm, total width: 1,441 mm, total height: 2,682 mm, overall weight: 1,797 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, fuel type: electric, BONGARD ORION Series Electric power 4 openings on 4 baking levels 1 baking path per level Deck dimensions 800x1800mm Integrated loading elevator Total baking area 5.8 m² Year 2017 Electrical power 32.8 kW Power supply 400 V Serial No. 930048019 Electrical protection 80 A Independent ERGOCOM control per level Chede Ahym Uopfx Alfjd Refractory soles, 20 mm thick Stainless steel electric heating elements Heating element protection in the arch Independent steam generator per level Individual water dosing per level Steam injection from the rear Anti-splatter steam diffuser Internal chamber lighting Removable glass doors Brushed stainless steel facade External dimensions 1441x2878x2682 mm Weight 1797 kg Used electric deck oven, 4 openings, BONGARD ORION EvO E801/4-180 – 5.8 m² baking area General description The used electric deck oven with 4 openings, BONGARD ORION EvO E801/4-180, is intended for bakeries and baking-pastry workshops seeking baking on fixed decks. This model, also referenced as 801/4.180 in the manufacturer's documentation, has 4 baking levels, with a baking path of 800 mm in width and a deck depth of 1,800 mm. Its total baking area of 5.8 m² allows for organizing batches on multiple levels. Designed for bread and viennoiserie production, this electric oven combines refractory decks, heating elements, and independent steam generation per level.

Condition: excellent (used), 472 USED HOBART - UNGERMANN Pass-Through Proofing Chamber. EXTERNAL DIMENSIONS (in cm): - Width 192 - Length 805 INTERNAL DIMENSIONS (in cm): - Width 157 - Length 734 - Height 200 Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Chsdpfezudy Uex Alfod Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Chodoz I Tt Iepfx Alfsd Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.