Used Chamfer Grinding Machine for sale (91,518)

Condition: refurbished (used), Machine totaly reconditioned With DRO Lasdewhk Uuepfx Aabjh Center height 175 mm Distance between centers 1000 mm Grinding wheel 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speeds 1'500-2'200 rpm With internal grinding attachement Misc. accessories MARCELS MASCHINEN AG

Condition: refurbished (used), Year of construction: 1987, operating hours: 200 h, functionality: fully functional, Please make your inquiry by email. Ledpsxmiqcofx Aabjah

Condition: like new (used), Year of construction: 2018, Stöckel FX 60/30 ST 2 Stöckel FX 60/30 ST 2 Surface Grinding Machine with STÖCKEL ST-2 Control, Year of Manufacture 2018, in Excellent Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Lasdswz Imhepfx Aaboh Year of manufacture: 2018 Power supply: 3/N/PE Operating voltage: 400 V Control voltage: 230 V/24 V DC/130 V DC Frequency: 50 Hz Connected load: 14 kW / 21.5 A Main fuse: 32 A Max. grinding area: 630 x 300 mm Standard magnetic chuck dimensions: 600 x 250 mm Max. table longitudinal travel: 680 mm Max. cross travel: 305 mm Max. distance from table to spindle center: 650 mm Max. table load: 400 kg Table speed: 2 – 30 m/min Rapid traverse cross movement: 1.3 m/min Automatic cross feed: 0.3 – 40 mm (intermittent, optionally continuous) Rapid traverse vertical movement: 600 mm/min Grinding wheel (standard: outer x width x bore): 300 x 50 x 127 mm Rib width: max. 60 mm Grinding wheel motor rating: 5.5 kW Hydraulic pump power rating: 2.2 kW Cross travel power rating: 0.35 kW Vertical rapid traverse power rating: 0.75 kW Total connected power: 12 kW Total weight of the machine: 3600 kg Operating noise level: 80dB(A) according to EN 31201 Hydraulic oil capacity: 125 l Coolant capacity: 90 l Accessories and Equipment: - 1 piece coolant unit - Electronic handwheel - Extraction unit - Operating manual, electrical schematics - Machine mounting pads - Grinding wheel About the Machine: We are offering a Stöckel FX 60/30 ST 2 surface grinding machine with automatic cycle, year 2018, in very good condition. The machine is, of course, fully operational. All slides move very smoothly and uniformly. Even at high speeds, the Stöckel runs very quietly. This newer generation of grinding machines is extremely user-friendly and is capable of producing surfaces in the low Rz range. Take advantage of the opportunity to view this machine under power on-site and see its condition for yourself. About the Controls: The STÖCKEL ST-2 control system provides all the functions needed for economical surface and plunge grinding. Inputs are made using softkeys on the control panel, while all information is presented graphically in color on the display. The control is intuitively designed and easy to learn in a short time. No ISO programming skills are required. The control is suitable for both automatic grinding cycles and for manual adjustment via electronic handwheel. The operator can intervene in an ongoing grinding cycle at any time, changing parameters or taking over feed via the handwheel. The control features the following: • Surface grinding program subdivided into rough grinding, finish grinding, and spark-out • Plunge grinding program subdivided into rough grinding, finish grinding, and spark-out • Multiple-plunge program (for rapid material removal) • Automatic dressing: A regular automatic dressing cycle can be triggered during grinding based on various criteria such as "grinding dimension" or "number of strokes." Dressing before finish grinding is also possible. • When the "speed control" option is selected, different cutting speeds can be set for roughing, finishing, and dressing operations.

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - Number of operating spindles: 6 pcs - Spindles pneumatically pressed onto the material - Milling units adjustable up/down, right/left and at an angle - 6 pneumatic clamps - Infinitely variable feed speed adjustment - Max milling height: 130 mm - Max milling length: 2500 mm - Max milling width: 330 mm - Shaft diameter: 40 mm Motor power: - Units 1-2 milling: 2×5.5 kW - Units 3-4 milling: 2×4.5 kW - Units 5-6 universal (sanding or milling): 2×4.5 kW - Extraction nozzle diameter: 10x152 mm - Air requirement: 6–8 bar - Dimensions (L/W/H): 8000x3000x2420 mm - Weight: approx. 6000 kg Lajdpfow Rv Ahex Aabsh ADVANTAGES – Italian production – For through-feed processing of curved elements according to template – 6 milling units – Unpainted – Safety covers – Original technical documentation DTR + CE – Used machine, in very good condition Net price: 46,900 PLN Net price: 11,030 EUR depending on exchange rate 4.25 EUR (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M60I/9035, Offer Number: M60I/9035 Machinetype: surface grinding machine Make: STÖCKEL Lsdpfx Aajw N Dmxsbsah Type: FX60/30 SPS Constr. year: 2010 table size: 600 x 250m Location: Germany

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Ledpfxow I Tt Sj Aabeah Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: excellent (used), Grinding range 800 x 600 x 500 mm Wheel diameter 400 mm Magnetic plate 800 x 600 mm Lasder Ezfwspfx Aabjh Automatic dresser Automatic balancing device Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Lsdpfx Ajh U Rznjaboah Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser Laedpjwzmgyofx Aabjh • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: good (used), Year of construction: 2013, operating hours: 63,000 h, functionality: fully functional, We are offering 1 × KLINGELBERG used bevel gear grinding machine. Manufacturer: KLINGELNBERG AG Brand: KLINGELNBERG OERLIKON Model / Series: G 27 Year of manufacture: 2013 Type: Bevel Gear Grinding Machine Condition: Excellent / precise tolerances Applications: Spiral bevel gears, hypoid gears, planetary gear sets Industries: Transmission manufacturing, passenger car gearboxes, commercial vehicle and agricultural machinery gear units, forklift transmissions, special gearboxes, helicopter drives, etc. Technical specifications: - Max. gear diameter: 300 mm - Maximum module: 8 - Minimum module: 0.7 - CNC control: SIEMENS SINUMERIK 840 D solution line (latest software options!) - Min./max. pitch cone angle: −90 / +90° Laedpfxsxg Ib To Aabsh - Workpiece spindle bore: 127 mm - Grinding wheel diameter: 50 – 230 mm - Continuously variable spindle speed: 7,500 rpm - Workpiece spindle speed: 700 rpm - Total connected load: 146 kW - Machine weight: approx. 21 t - Machine dimensions: approx. 9.5 × 3.6 × 3.1 m - Integrated probe in grinding head - External spindle cooling - ELBARON integrated oil mist extraction system - HOFFMANN coolant filtration system for each machine The machine achieves outstanding tolerances and is ready for dismantling 14 days after conclusion of contract. Currently under power and available for demonstration. KLINGELNBERG inspection reports, demonstrating perfect results (and exact geometry), are available digitally and can be sent upon request. Please inquire for further details.

Year of construction: 1984, condition: ready for operation (used), Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible. Laedsxpw Ubepfx Aaboh

Condition: used, _____ Description: Year of manuf. : 1999 Control : Heidenhain 1830 M - KELCO 110/120 Grinding length : 1000 mm Centre width : 1000 mm Workpiece headstock: Swivel range:-10°/+100° Speed:800 rpm Center height:175 mm Internal mounting cone:MK5 Short taper external:DIN 55026 Workpiece weight max.:150 kg Grinding headstock: Design:Tandem grinding headstock B-axis:-210°/+30° Internal grinding device:Internal grinding spindle Grinding table (X-Axis): X-axis:320 mm Max. speed:7.5 m/min Resolution:0.1 μm Lower table (Z-axis): Center distance:1,000 mm Z-axis:1,150 mm Max. speed:15 m/min Resolution:0.1 μm Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Lodewz T Azjpfx Aabeah Tailstock:MK4, stroke 50 mm Workpiece measurement I:Movomatic TMP 91 Workpiece measurement II:Movomatic TNU 91 Tool measurement:Marpos A 90 Set-up mode:Electronic handwheel Accessories:Various flanges, tips and chucks

Condition: excellent (used), Center height 180 mm Distance between centers 1000 mm Grinding lenght 650 mm Grinding wheel 500 x 80 x 127 mm + 250 x 32 x 127 mm With internal grinding attachement Misc.accessories Lajdjvhafdjpfx Aabeh MARCELS MASCHINEN AG

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Completely overhauled: 2008 Ljdpfx Asu Ed Nlsabjah Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: good (used), Year of construction: 1991, Technical data Laedpfxovx E Rts Aabjh - Table surface: 800 x 450 [mm] - Grinding surface: 800 x 500 [mm] - Max. distance between table surface and spindle: 650 [mm] - Max. weight on the table: 400 [mm] - Spindle speed: 1400/1700 [tr/min] - Dimensions of the grinding wheels: 350 x 127 x 50 [mm] - Dimensions of the machine: 3350 x 2100 x 1750 [mm] - Weight: 2900 [kg]

Condition: new, width of the strips 50.0 mm Lasdsxaaxqepfx Aabjh band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Year of construction: 2014, condition: ready for operation (used), X-axis: 350mm, z-axis: 1000mm, grinding diameter: 290mm, grinding length: 800mm, center height: 150mm, x-axis speed: 0.0001–10m/min, z-axis speed: 0.0001–12m/min, control: CNC Fanuc Oi-TD, connected load: 25kVA, length: 3340mm, width: 2660mm, height: 2325mm, weight: 8t. equipment/accessories: software functions for grinding spline shafts for gear pumps, external grinding cycles: plunge, straight, taper, multiple plunge, straight, taper, oscillation, straight, taper, shoulder plunge, shoulder with K-value, shoulder oscillation, DIN ISO. dressing cycles: dressing of radii as well as concave and convex shapes possible, periphery, left flank, right flank, profiles according to DIN ISO. measuring system: measuring device tec, diameter measuring head measuring range: 1mm, measuring accuracy: 0.5μm, not suitable for measuring an interrupted cut, length measuring head measuring range: -/+2mm, measuring accuracy: 0.5μm, use of two length measuring heads (2 measuring probes). operating hours: approx. 7847h. documentation available. an on-site inspection is possible. Lodpfxjv Exr Ro Aabeah

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min Lsdpfx Ajxhdz Ejabjah - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: good (used), Grinding range 800x500x480mm Table size 800x400mm Wheel diameter 400mm Magnetic plate 800x400mm Ledpfx Asd Nmx Njabeah MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, center height: 165 mm, workpiece weight (max.): 300 kg, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 320 mm, spindle speed (max.): 410 rpm, Maximum grinding length: 1,000 mm Center height: 165 mm Maximum grinding diameter: 320 mm Maximum permissible weight between centers: 300 kg TABLE – Z AXIS Maximum automatic travel: 1,165 mm Rapid traverse speed: 6,000 mm/min Adjustability in both directions: +/- 6° CROSS SLIDE – X AXIS Travel: 200 mm Speed: 6,000 mm/min GRINDING HEAD Spindle speed: 1,420 rpm Grinding wheel dimensions (ø x bore x thickness): 400 x 127 x 60 mm Orientation range: +/- 45° WORKHEAD Spindle speed: 0-410 rpm Internal/external tool holder taper: Morse 4 / Asa 3 Tilt range: 90° TAILSTOCK Manual quill stroke: 40 mm Quilt diameter: 50 mm Internal connection taper: Morse 4 Laedpfx Aexqhd Asabeh DIMENSIONS AND WEIGHTS Length: 4065 mm Width: 2550 mm Height: 2600 mm Weight: 4000 kg Machine complete with: • Closed steady rest • Open steady rest • Dressing unit on table • Givi Measurements Vision 700 2-axis digital readout • Tank with paper filter

Condition: good (used), Year of construction: 1987, TSCHUDIN Type HTG-610 U660 Lasdpfx Aasw Iqr Sobsh TSCHUDIN Type HTG-610 U660 Cylindrical Grinding Machine, year of manufacture 1987, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. TECHNICAL DATA MAIN DATA Centre distance: 600 mm Centre height: 100 mm Total power requirement: 4-8 HP MACHINE TABLE Table travel max.: 620 mm Table speed, stepless up to: 5 m/min Reversal delay up to: 4 sec Chuck base swivels: 7° GRINDING SPINDLE HEADSTOCK Wheel diameter: 300 mm Wheel bore (with 300 mm diameter): 127 mm Motor power with 300 mm wheel: 2.5 HP WORKPIECE SPINDLE HEADSTOCK Swivelling range: 360° Spindle taper: MT 4 Spindle speeds, stepless: 65-500 rpm Motor power: 0.5 HP TAILSTOCK Quill internal taper: MT 3 Quill stroke: 20 mm INTERNAL GRINDING ATTACHMENT Spindle diameter max.: 80 mm Motor power: 1.5 HP COOLANT TANK Capacity: 100 litres Dimensions (LxWxH): 2160 x 1200 x 1350 mm Weight: 2600 kg About the machine: We are offering a TSCHUDIN Type HTG-610 U660 cylindrical grinding machine with automatic cycle, year 1987, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Tschudin also operates very quietly at high speeds. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself. You can find further cylindrical grinding machines from reputable manufacturers on our website.

Condition: excellent (used), Center height 300 mm Lajdjtpgnhspfx Aabeh Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm With DRO With measuring control MARPOSS Misc.accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2015, Okamoto ACC 64 CA Surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control, year of manufacture 2015, excellent condition. CE compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: - Year of manufacture: 2015 - Table size: 605 x 400 mm - Table travel: 800 x 440 mm - Distance spindle center (min/max): 22.5 – 522.5 mm - Max. load: 1000 kg - X axis longitudinal travel: 3000 – 25000 mm/min - Y axis crossfeed: 0 – 2000 mm/min - Rapid traverse: 4000 mm/min - Z axis infeed: 0.0001 – 0.001 mm - Rapid traverse: 1000 mm/min - Grinding wheel: 355 x 38 x 127 mm - Speed: 500 – 2500 rpm Laedpsxp H Iksfx Aabjh - Motor: 5.5 kW - Weight: 4950 kg - Dimensions: 3550 x 2695 x 2203 mm Accessories and features: About the machine: Offered here is a surface grinding machine Okamoto ACC 64 CA with CA Surface Grinding Control. This universal surface grinding machine is in excellent original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. With a grinding path of 800 mm longitudinally and a cross travel of 400 mm, this machine is ideal for toolmaking, jig manufacture, and small batch production. The series stands out for its comprehensive standard equipment and ease of operation. The robust spindle head design and the double V-guideways in both longitudinal and cross axes ensure lasting precision. The intuitive operation of the control elements simplifies handling and significantly increases productivity. The guideways are automatically lubricated via a central lubrication system. The Okamoto has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Okamoto under power on site. You can find further surface grinding machines from reputable manufacturers on our website.

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Lasdpfxsvwdhho Aabjh Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Condition: excellent (used), Year of construction: 1997, DETAILS PRECISION SURFACE GRINDING MACHINE Manufacturer: JUNG Model: JF 520 Year of manufacture: 1997 Machine weight: 2200 kg Total weight: 2600 kg Location: Haiger Price: €24,000 excl. VAT Description: Serial no.: 3821, Digital readout, manufacturer Heidenhain, microprocessor control, profile dressing device, manufacturer Diaform, machine lighting, coolant system, magnetic clamping table. Technical Data: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 600 x 200 Laodpfxjxqa I Ts Aabsh Max. grinding wheel dimensions (mm): 225 x 25 x 51 Distance table/spindle center (mm): 350 (+50) Table longitudinal feed reciprocating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power kW (with creep feed): 2.2 (3.5)