Used Cheek Republic for sale (400)

Condition: used, mileage: 1,08,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro1, Year of construction: 2000, number of seats: 2, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 Fodst Rck Rjpfx Aabepn FIN: K517249 Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) * Protective grille above cabin * 2 x rotating beacons Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: excellent (used), machine/vehicle number: 205754, Schaublin 135 Toolroom lathe in good condition, Original paintwork with Mitutoyo 2 axis digital read-out. Mach. nr. 205754 * Center height 135 mm * length 630 mm * Turning diameter over bed 355 mm * Turning diameter over cross slide 150 mm Headstock: * spindle speeds, infinitely variable 14 3000 r / min. * Spindle nose Camlock D1 4 " * Spindle taper Morse 5 * Spindle bore 40 mm * reducer for collet * pliers passage 24 mm Thread and feed box: * 48 Metric threads 0.25 to 14 mm * 48 English thread 72 to 1 U /" * 48 Module thread module 0.125 to 7 24 * Powerfeed, longitudinally and transversely from 0.015 to 0.21 mm * 24 longitudinal and cross feeds from 0.025 to 0.35 mm * Click to feeds by using the thread cutter wheels cross slide: * path on the cheek 620 mm * Werkzeugschlittenweg 100 mm * Cross slide travel 180 mm * Height of centers over saddle 26 mm Tailstock: * Pinolenkonus Morse 3 * tailstock quill 120 mm *Lateral 10 mm Engine: * Speed 750 3000 r / min. *Power 2/4 HP Weight and dimentions: * weight Approx. 1300 kg * Length Depth x Height 1715 x 970 x 1280 mm Accessory in toolcabinet: See pictures. * Mitutoyo 2 axis Digital read-out. * 3 jaw chuck * MULTIFIX with 2 toolpost * change gearwheels * Coolant divice * manual in German Fpjdpfx Ajmidlkoabjn To machine: Offered Schaublin 135 is in a very good technical condition. The machine is fully functional. All the guideways are very good and the slides run smoothly and evenly. In all speeds the machine runs quietly. The machine is mechanical and electrical fully inspected and a oilchange is been done.

Condition: used, Used Heidolph model Laborota 20 S (nowdays Hei-VAP) large scale rotary evaporator: - Glassware set A2C: includes one ascending, one descending condenser and one expansion vessel, one 20-l evaporating flask, two 10-l receiving flasks. - Speed of rotation: 6 - 160 rpm. - Stainless steel heating bath: 0 - 100°C (water) or 0-180°C (oil), 400 mm diameter with float switch and automatic inlet valve. - Power: 4000 W. - Timer: 0 - 99:59 hours. Fjdpfsw R Uafjx Aabspn - Includes: Base cart, control panel, guard hood, rotation axis locking. - Dimensions: 970 mm x 620 mm x 1600 (height) mm. - Weight: 120 kg (withouth glassware set).

Condition: used, Year of construction: 2007, Year: 2007 Condition: excellent Rilecart R-800-closer Semi-automatic binding machine Rilecart R 800 for binding calendars, blocks, etc. in a double metal spiral from 3/16" to 9/16". Binding width from 100 to 800 mm. Automatic hook inserter Fpodpfx Aeww Ecrsabon

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 22,000 mm, total length: 50,000 mm, total height: 8,500 mm, overall weight: 24,000 kg, Steel Hall for Sale – 22 × 50 m – Available Immediately We offer for sale a complete steel hall with dimensions of 22 × 50 meters, which is available immediately – dismantled and ready for shipment. Technical Specifications: Dimensions: 22 m (width) × 50 m (length) Total height: 8.5 m Eaves height: 4.5 m Painted: RAL 7016 Structure: steel frame, bolted (without cladding – optional offer available) Condition: very good, complete structure, ready for transport Documentation available, including structural calculations Fodpfewgwfqjx Aabspn Assembly service available upon request This hall is ideal for production facilities, storage, agriculture, or other commercial uses. Custom Manufacturing Available: We are a manufacturer of steel halls and also offer custom-made solutions – steel halls built to your specifications, including delivery and installation. Price: upon request 📍 Location: Liberec, Czech Republic 📞 Contact us for more information, a price quote, or a non-binding consultation.

Condition: new, As a REHM specialist dealer, we now have the opportunity for customers in Offenburg and the surrounding area to receive up to 40% subsidy from the state when purchasing a new MIG/MAG PULS welding machine. Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries. REHM MIG/MAG welding machine FOCUS.ARC P REDUCES CO2 AND BRINGS MONEY FROM THE STATE WHO SUPPORTS? The Federal Office of Economics and Export Control (BAFA) supports investment measures to optimize the energy efficiency of systems and processes. WHAT IS SUPPORTED? Investments that demonstrably lead to energy savings and thus to a reduction in CO2 emissions can be subsidized. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can take advantage of the Module 4 subsidy. The costs for drawing up the energy-saving concept and implementation support from an external energy consultant are also eligible for funding. The amortization period for the entire measure must be more than 2 years. HOW MUCH FUNDING IS AVAILABLE? Up to: - 40 % of the costs - 900 € per t CO2 - 10 million € BAFA supports large companies with up to 30% (maximum €500 per tonne of ton of CO2 saved) and small and medium-sized companies with up to 40% (maximum €900 per ton of ton of CO2 saved) of the eligible costs. The maximum funding amounts to 10 million per investment project. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a permanent establishment or branch in Germany are eligible to apply. The planned measures must be carried out on the territory of the Federal Republic of Germany. A BAFA-approved energy consultant must be commissioned to draw up the obligatory energy-saving concept. HOW DO YOU APPLY FOR FUNDING? 01. list: Make a list of all appliances that are to be replaced and all appliances that are to be purchased. 02. check: We take the necessary data from you and check your funding amount provisionally. At the same time, we prepare a quotation for the new welding equipment. 03. energy consultant: We prepare all the data for you and pass it on to an energy consultant who works with us. This saves you time and money. 04. application: After checking the data, the energy consultant submits the application for funding on your behalf. 05. processing time: If it is urgent, we can speed up the processing of the application for you. for you. This reduces the processing time to approx. 10 to 15 days. The following MIG/MAG PULS welding machines from REHM are eligible for BAFA funding: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm Fpedpfxew Eikvs Aabon FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 44,576 h, Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Number of axis 4 Movement X-Axis Movement 800 mm Fsdpfewyygkox Aabopn Y-Axis Movement 710 mm Z-Axis Movement 710 mm This 4-axis DMG DECKEL MAHO DMC 80H was manufactured in 2008. It features a SIEMENS Sinumerik 840D CNC control, an automatic tool changer with 40 positions, and a working envelope of 800 x 710 x 710 mm. It also includes 2 pallets measuring 630 x 500 mm each. If you are looking to get high-quality milling capabilities consider the DMG DECKEL MAHO DMC 80H machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 36290, cutting force: 650 t, overall weight: 62,080 kg, table length: 6,000 mm, table width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Performance and forces Shear force: 650 t Power consumption: 200 kW Working range Chamber length: 6,000 mm Closed chamber width: 781 mm Loading table dimensions: 6,000 x 2,500 mm Fpodpew Nv Disfx Aabon MACHINE DETAILS Weight including table: 62,080 kg Operating hours: 8,000 Note: The machine will be available from 01.03.2026.

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Fedort Tw Djpfx Aabopn Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: new, Year of construction: 2024, GG 015 EURO 5 The new Günter Grossmann GG015 compact loader. The loader Günter Grossmann GG015 (1500 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very fine. The control panel is very nice and clear. The cab is soundproofed, insulated, equipped with heating, very comfortable and nicely glazed which allows working safely and comfortably. The machine has a very durable construction. The machine is equipped with a quick coupler, which allows accessories to be changed quickly without leaving the cab. Additional equipment: 4 in 1 bucket, alligator grapple, alligator grapple for trees, straw or silage. We are the largest dealer in Poland, Czech Republic and Hungary. We have all spare parts for our branded machines. GG015 loader + bucket + pallet forks + quick coupling Specification Model GG015 Engine Xinchai euro 5 Fjdpfx Aaou Dcgyebspn Engine type: Inline, water-cooled four-stroke diesel engine Rated output: 36.8KW -( 50hp ) Rated speed: 2200 rev/min (rpm) Steering: Fully hydraulic Pressure in the system: 1.2 ~ 1.5 MPa Brake One hydraulic brake on four wheels Parking brake: manual tire 12-16.5 Wheelbase: 2100 mm Track: 1720 mm MAIN DIMENSIONS Overall length (bucket on ground): 5200 mm Overall height: 2730 mm Overall width: 1540 mm RANGE Bucket capacity: 0.7 m3 Bucket width: 1750 mm Max. breaking force: 36.8KN Capacity: 1500 kg Machine weight: 3550 kg Driving: Four-wheel drive Min. Turning radius: 4500 mm Unloading height: 2650 mm Drive system: Hydraulic transducer

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,800 kg, axle configuration: 3 axles, loading space length: 13,480 mm, loading space width: 2,460 mm, loading space height: 2,750 mm, loading space volume: 91 m³, first registration: 07/2017, Year of construction: 2017, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-Axle Stas S 300ZX Moving Floor 91m³ VIN: 001203 Chassis / Attachments: * Air suspension / raising and lowering * Lifting axle: 1st and 3rd axle * Jost landing legs * WABCO Smart Board * Tyres: 385/65 R22.5 * Remaining tyre tread: 1=60/80% 2=90% 3=60/90% * 3 x SAF axles with disc brakes * PVC toolbox by STAS * Fifth wheel height: approx. 1.14 m Body: * Moving floor system by Cargo Floor * Volume: approx. 91 m³ * WABCO Smart Board * Sliding tarpaulin * Working platform with walkway left and right * Clean-out partition wall * Remote control * Cargofloor moving floor system Weights: * Gross weight: 36,000 kg * Payload: 27,800 kg * Unladen weight: 8,200 kg Other: * German registration * MOT/SP 02/ * 1 previous owner New main inspections / safety checks or reduction/increase of permissible weight are available on request. We are happy to assist you in obtaining export/temporary number plates, and we can also handle vehicle transfers within the Federal Republic of Germany. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to changes, interim sales, and errors! --- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide variety of vehicles. Our business philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are glad to help you with organizing special transports. Temporary/export number plates We are happy to help you obtain export or temporary number plates. Fedpfx Asw Sf Trsabjpn Customs clearance We are happy to assist you with customs formalities.

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 540 mm, total length: 1,050 mm, overall weight: 10 kg, conveyor belt width: 500 mm, inner radius: 800 mm, outer radius: 1,600 mm, TAF article number: 1000005015 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 90° x 1,050 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor width in mm: 500 Substructure: Not available Curve (degrees): 90° Curve radius, inside in mm: 800 Curve radius, outside in mm: 1. 600 Idler roller Axle type: Threaded rod M8 / nut M8 Fjdpfxjwylzaj Aabopn Idler roller diameter: in mm 50 Idler roller per axle: 1 Idler roller material: Plastic Roller pitch, inside in mm: 55 Roller pitch, outside in mm: 100 Drive: Gravity Net weight in kg: 10 Function test: Used, fully functional Condition: Ok

Condition: ready for operation (used), Year of construction: 2008, Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN Additional Equipment Robot Demag DR731 (MY: 2011) available at extra charge. This DEMAG Systec 350/720-1450 was manufactured in 2008. A robust hydraulic injection moulding machine, it features a clamping force of 3500 kN and tie bar spacing of 720x720 mm. Screw diameter is 60 mm. It includes a Robot Demag DR731 available at extra charge. Consider the opportunity to buy this DEMAG Systec 350/720-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Fodpfx Aajwygn Ujbopn

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper Fpedpfx Ajhf Acljaben - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: ready for operation (used), Year of construction: 2008, Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1700 kN Additional Equipment Robot Demag DR721 available at extra charge Fjdpewygpfefx Aabopn This DEMAG Systec 170/520-600 was manufactured in 2008. It features a clamping force of 1700 kN and tie bar spacing of 520x520 mm. The screw diameter is 45 mm, and it includes both pneumatic and hydraulic valves. A robot Demag DR721 is available at an extra charge. If you are looking to get high quality injection moulding capabilities consider the DEMAG Systec 170/520-600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1600 kN Fpodswygplspfx Aabon Additional Equipment Robot Wittmann W821 available at extra charge. This DEMAG Systec 160-520/430 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a clamping force of 1600 kN and tie bar spacing of 520x520 mm. The screw diameter is 40 mm. It includes a Wittmann W821 robot available at an extra charge. Consider the opportunity to buy this DEMAG Systec 160-520/430 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, Injection Unit Screw diameter 30 mm Clamping Unit Clamping force 1000 kN Additional Equipment Fpsdpewygpxefx Aabon Additional equipment: Robot Wittmann W818 available at extra charge This DEMAG Systec 100/420-310 was manufactured in 2015. A hydraulic injection moulding machine featuring a clamping force of 1000 kN and tie bar spacing of 420x420 mm. It includes a screw diameter of 30 mm and has logged 42,702 pump hours. An additional Robot Wittmann W818 (MY: 2015) is available at extra charge. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), This Battenfeld HM 1600/750 was manufactured in 2003. It features a clamping force of 1,600 kN and an injection pressure of 2,116 bar. The screw diameter is 50 mm, and it includes a unilog CC300 B4 control system. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. Fpedpjwwxhbjfx Aaben Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, operating hours: 26,413 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Feed Force 10 m/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement 510 mm Y-Axis Feed Force 10 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 460 mm Z-Axis Feed Force 10 m/min Z-Axis Rapid Traverse 30 m/min Tools Type of tool holder SK40 Fsdswwxi Espfx Aabjpn Media Chip conveyor Yes Additional Equipment Workpiece probe This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Heidenhain iTNC 530 control, with travel dimensions of 635 mm on the X-axis, 510 mm on the Y-axis, and 460 mm on the Z-axis. The spindle can reach up to 12,000 rpm, and it includes a SK40 tool holder with a 20-slot tool magazine. Rapid traverse rates are 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 23,902 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Fpedpfx Aaewwxi Sebon Main Drive Spindle speed range 8000 Spindle motor power 13/9 kW Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Feed Force 10 m/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement 510 mm Y-Axis Feed Force 10 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 460 mm Z-Axis Feed Force 10 m/min Z-Axis Rapid Traverse 30 m/min Tools Type of tool holder SK40 Additional Equipment Workpiece probe included This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2006. It features a Heidenhain iTNC 530 control, travels of 635 mm in X, 510 mm in Y, and 460 mm in Z. The spindle reaches up to 8,000 rpm with a power of 13/9 kW. It includes a SK40 tool holder and a 20-slot tool magazine. If you are looking to get high-quality milling capabilities consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1300 kN Mould height min 275 mm Mould height max 500 mm This Battenfeld HM 1300/750 was manufactured in 2004. It features a clamping force of 1,300 kN, injection pressure of 2,116 bar, and a screw diameter of 45 mm. Equipped with a Unilog CC300 B4 control system, it supports a mold height range of 275 to 500 mm. Consider the opportunity to buy this Battenfeld HM 1300/750 hydraulic injection moulding machine. Contact us for more information. Fjdpfx Aswwxlmjabopn Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Fodpfswwm Shex Aabopn Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, Movement X-Axis Movement 3070 mm Y-Axis Movement 1550 mm Table Table load 920 kg Max Material Thickness Steel 25 mm Stainless steel 25 mm Aluminium 25 mm This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information. Fedpfx Ajwvb E Tsabepn Application Types Cutting

Condition: ready for operation (used), Year of construction: 2021, Main Drive Spindle speed range 10000 Spindle motor power 22.4 kW Tool taper ISO40 Number of axis 5 Movement X-Axis Movement 610 mm Y-Axis Movement 406 mm Z-Axis Movement 406 mm Additional Equipment Set of tool holders Renishaw probe set Fpsdpfowvb Diex Aabsn Chip conveyor High speed machining TSC-ready Programmable cooling nozzle Additional air conditioning unit for cooling the electrical cabinet This 5-axis HAAS UMC 500 was manufactured in 2021, featuring a 610x406x406 mm working travel and a ø400 mm table that can handle up to 226 kg. It includes a B-axis tilting at -35°/+120° and a full 360° C-axis rotation. The spindle reaches speeds up to 10,000 rpm with a power of 22.4 kW. Extras include a Renishaw probe set, chip conveyor, and additional cooling unit. If you are looking to get high-quality milling capabilities consider the HAAS UMC 500 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TC Additional Equipment Including bar feeder EMT SUPER 80 (300-1550 mm) / Including tooling, jaw chuck, collet chuck, set of collets (round, hexagon) Fpodpfx Aajwug S Nebsn This HARDINGE Talent 8/52 was manufactured in 2005. It features a FANUC Oi-TC control system, a 12-position turret, and a maximum spindle speed of 5000 rpm. Dimensions are 2100 x 1600 x 1850 mm, and it includes a bar feeder EMT SUPER 80. If you are looking to get high-quality turning capabilities, consider the HARDINGE Talent 8/52 machine we have for sale. Contact us for more information. Application Types Turning