Used Chopper Chopper for sale (111)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0509, overall weight: 1,200 kg, number of blades: 28, rotor width: 630 mm, No minimum price – guaranteed sale to the highest bidder! Hjdpfx Akoz Nip Aerenu TECHNICAL DETAILS Main engine power: 18.5 kW Rotor width: 630 mm Number of axles: 1 Number of rotating blades: 28 Screen perforation: 20 mm Hydraulic slide: Yes Opening width: 810 mm Opening length: 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,660 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT Hydraulic slide CE marking

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Hnedpfx Aoz A H Sajkrsu Storage location: Supplier

Condition: ready for operation (used), Year of construction: 2007, Shredder for plastic 45kw power , can chop foil and other plastic into small chunks , we used for bubble foil and polyethylene foam, and LDPE foil. Hedpfx Akoxf Txzjrenu The shredder has also soft start box.

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Hnjdpfx Ajzmul Eokrou Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair Hodpjzgu Igefx Akrjnu documentation and software machine powered up for inspection

Year of construction: 2010, condition: good (used), functionality: unexamined, For sale: straw shredding line. The line consists of: - horizontal feeder, - inclined feeder, - chopper with housing, - individual bag filter. Line capacity: approx. 5 t/h Length of horizontal feed table: 7.6 m Drive motor power of horizontal feed table: 1.5 kW Length of inclined feed table: 12.5 m Drive motor power of inclined feed table: 1.5 kW Shredder dimensions: Height: 8.2 m Length: 5.2 m Width: 3.8 m Power: 2 x 132 kW Each shredder is equipped with an individual bag filter. For more photos and details, please contact us. Machines can be viewed in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Hnjdpowttp Sefx Akreu

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 2,500 h, power: 3.5 kW (4.76 HP), input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 3, number of slots in tool magazine: 9, controller manufacturer: VHF, actuation type: electric, total height: 2,200 mm, total length: 3,500 mm, total width: 2,200 mm, overall weight: 1,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, VHF CAM 1530 PREMIUM – High-precision CNC gantry milling machine with extensive premium features For sale is a high-quality, virtually new VHF CAM 1530 Premium CNC gantry milling machine. Hsdpfjz Rz Hcsx Akrsnu The machine impresses with its high precision, robust industrial design, and extensive features. It is ideally suited for the professional machining of plastics, aluminum, and other non-ferrous metals, wood, and composite materials. Thanks to the automatic tool changer, the precise Jäger high-frequency spindle, and the powerful vacuum table, the system offers excellent conditions for efficient and demanding production tasks. The machine is offered as a comprehensively equipped complete package including control system, software, and numerous accessories. Reason for sale As part of the continuous development of our company and the associated realignment of our production, we are investing in a larger CNC system with expanded machining capabilities. For this reason, we are selling our VHF CAM 1530 Premium. Technical highlights * High precision: Repeatability of ± 0.01 mm * Generous travel ranges: X = 3,050 mm, Y = 1,550 mm, Z = 290 mm * Automatic 9-position tool changer including tool length measurement * Jäger high-performance spindle with up to 40,000 rpm * Three-zone vacuum table with separately activatable areas * Backlash-free ball screw drives on all axes * Dual linear guides and double Y-axis drive * Maximum feed rate of 10,000 mm/min * Automatic tool length measurement and Z-axis zero point determination * Extraction system and air cooling, expandable to minimum quantity lubrication * Suitable for contour machining, engraving, and 2.5D and 3D milling operations Equipped with a powerful, liquid-cooled high-frequency spindle from Jäger: Type: Chopper 2300-40 K S5A * Rated speed: 40,000 rpm * Peak power (Pmax/5s): 3.5 kW * Continuous power (S1): 2.3 kW * Hybrid ball bearing * Runout and flatness each below 2 µm * Pneumatic tool change * Tool holder WK19 * Protection class IP54 Software and control The system features a comprehensive software package: * CNC Term – control software * Rhinoceros 6 Commercial – professional 3D CAD modeling software * Cenon CAM – CAM software on a separately integrated Apple computer in the control tower This provides a wide range of options for design, work preparation, and CNC machining. Extensive accessory package The offered complete package includes, among other things: * Haimer Zero Master – professional 3D edge probe * Handwheel control * Three-zone vacuum table (3,000 × 1,250 mm) with vacuum pump * Two pneumatically switchable clamping jaws * Automatic tool changer * 10 tool holders WK19 * 15 collets in various diameters * Various milling and drilling tools * Uninterruptible power supply (Schrack UPS USSEP100) An attractive opportunity for professional users With the VHF CAM 1530 Premium, you acquire a high-quality CNC gantry milling machine that combines precision, flexibility, and extensive automation functions in a single system. Particularly interesting for manufacturing companies, plastics processors, model makers, advertising technicians, and companies looking to expand their CNC production economically.

Condition: good (used), functionality: fully functional, We are selling a mobile auger chipper type HP50 from the manufacturer Sasmo/Laimet. It is powered by an 8-cylinder Scania diesel engine. The machine has a tracked chassis. The chipper can chip trunks up to a diameter of 60 cm. Hedjt Id Ixjpfx Akrenu

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Hjdjztxy Tspfx Akrenu Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Hnsdpfxey Hi D Se Akreu Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Hnsdpoyt Iawefx Akrsu Machine is without gearbox.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Hodpfeynzg Hsx Akrjnu Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. If you have any further questions or require additional information, please send us a message or call. Hedpfx Aezc I S Eokrenu

Condition: good (used), functionality: fully functional, Year of construction: 2001, working width: 1,650 mm, overall weight: 8,000 kg, rear tire size: 15/55-17, 48 cubic meters, 6 rakes, hydraulic drawbar, 7 blades. Hjdpfxjzrzd Ss Akrjnu

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 30 h, overall weight: 2,450 kg, total height: 2,400 mm, total length: 2,000 mm, total width: 1,700 mm, The machine consists of two parts a raw grinder and a fine grinder. Hodpfjzrvq Hjx Akronu It is used for grinding electronic mainboards, cable waste and plastic waste to 20x20 mm, while the fine grinder grinds them to 5x5 mm pieces. The grinding unit is kept close by a hydraulic cylinder, opening is necessary during maintenance only. Grinding is carried out between fixed and rotary blades with adjustable gap. Motor: asynchronic.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Hnodpfx Asz Ebbbjkreu Oil tank capacity: 48 l Number of axles: 1 Opening width: 600 mm Opening length: 250 mm Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: used, Industrial shredder chopper This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Hnodpfxjymaiqs Akrou Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Hsdpjzr D Rbsfx Akrenu

Condition: good (used), Year of construction: 2017, operating hours: 12,000 h, Single-shaft shredder with pusher floor Rotor diameter: 500 mm Rotor width: 1300 mm 87 knives on the rotor Knife size: 40 x 40 mm Motor: 75 kW Hodjzbzuwopfx Akronu with hydraulic pusher floor: 7.5 kW Screen with 20 mm and 30 mm openings Hopper capacity: 14 cubic meters with discharge conveyor belt, approx. 3 m long Total weight: approx. 10 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, For PTO drive (200-450 hp). Equipped with a loading crane and a telescopic tipper body (hopper, 25 m³). Hnsdpfxezz Ryue Akrju

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" Hnodpfx Aoxmthrokreu THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Hodjy D E Tdopfx Akronu

Condition: like new (used), Year of construction: 2022, We offer a cryogenic impact mill with an internal liquid nitrogen tank and an insulating shield. We are selling a complete set, ready for operation (grinding containers and other accessories are included). The mill is in excellent condition, well-maintained, and has been used only occasionally. Hjdpezcvkpefx Akrsnu The device can be inspected and collected from our laboratory near Olsztyn. Transportation is the responsibility of the buyer. Personal collection is preferred.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Hedpfx Akevvi Anersnu

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, number of blades: 63, rotor width: 1,150 mm, rotational speed (max.): 1,470 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rotor width: 1,150 mm Number of rotating knives: ± 63 Screen perforation: 20 mm Opening width: 2,580 mm Opening length: 2,180 mm Stroke of hydraulic slide: 1,000 mm Oil tank capacity: 75 l MACHINE DETAILS Main motor power: 30 kW Speed: 1,470 rpm Hydraulic unit power: 3.4 kW Number of axles: 1 Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,850 x 1,550 mm Unladen weight: 5,000 kg Transport packages: 2 Hnsdpfxsz Eba Rj Akrju EQUIPMENT Hydraulic slide