Used Chop Cutters for sale (2,947)

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Csdpfxjx Dcpgo Ad Dogt

Condition: like new (used), The factory where we bought this from say that they never used the machine from new, it has sat in storage ever since it was delivered. Cjdpfx Aox Axa Ssd Djgt

Condition: excellent (used), Almost in new condition, this Treif slicer can be used on boneless or bone in products. Pork loins, bacon, sirloin steaks etc. Can cut from as low as a few mm thick. Cgedsx Awy Dopfx Ad Dot

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg. Csdpfxsv Eamco Ad Dsgt

Condition: refurbished (used), Hand corn cutters 10 pcs for sale - Type: A&K - Second-hand, refurbished - Includes 1 new cutterhead - Without knives Codpfeyxnqbjx Ad Degt FCA Debrecen

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Cgjdpfx Adoww E Nre Det Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: as good as new (ex-display), Year of construction: 2023, Fiber laser 1500 x 3000 12kW Year of production 2023 DEMO machine The machine has never worked in production Price includes - exchangeable working table 1500 x 3000mm Codpjr A Ellsfx Ad Djgt - 12kW MAXPhotonics source - BLT head with autofocus - HYPCUT software - Nesting software - CYPNEST - Warranty 2 years - Chiller (cooling unit) - Voltage stabilizer - Wireless remote control controller - Automatic high-pressure proportional valve (N2 and O2) - Light curtains - Camera set (3 pcs) with color monitor - CE safety glass - Safety sensors - Safety rear gate - Barell filter set - CE declaration of conformity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt Cgsdpfx Aswiryued Dst driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height Cjdowiq Scspfx Ad Dsgt hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Codewcx Ufspfx Ad Djgt

Condition: excellent (used), Year of construction: 1982, Make: OERLIKON Type of machine: FM3 Year of manufacture: 1982 Control system: HEIDENHAIN x-travel: 1300 mm Speed range: max. 1120 U/min Control: conventional Codpfx Adei If N Ie Dsgt Machine's weight: 6 t

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Cgodpey E Ex Aefx Ad Det Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: used, Year of construction: 2016, GFPM SFV 2500 – Year 2016 Arrising Machine Maximum Dimensions: 2500 x 3500 mm Minimum Dimensions: 270 x 400 mm Cjdpfx Ajy If Ddjd Djgt Thickness: 4-22 mm Speed: 5-25 m/min. Processing Time: 15 sec./sqm Power: 18 kW

Condition: ready for operation (used), functionality: fully functional, The Alpina PB 90 is a professional-grade bowl cutter designed for industrial meat processing. It is engineered to efficiently chop, mix, and emulsify meat and other food products, making it suitable for large-scale food production environments.​ 🔧 Key Features & Specifications Bowl Capacity: 90 litres Knife Motor Power: 22.0 kW Bowl Motor Power: 0.8 kW Cjdpfowf Dhiox Ad Djgt Knife Speeds: 6 adjustable speeds Bowl Speeds: 2 adjustable speeds Mixing Speeds: 2 adjustable speeds Power Supply: 400 V / 3-phase / 50 Hz Dimensions: Approximately 2100 x 1250 x 1400 mm​

Condition: used, Year of construction: 1989, This Wacker joint cutter, model DFS 90, is being offered in our industrial auction / machinery auction: Collective online auction for construction equipment - building materials - vehicles - site equipment - garden machinery. Cgodpfx Asy I Na Aed Dot

Condition: new, Year of construction: 2026, functionality: fully functional, Versatile hamburger, hot dog bun, roll-bread, panini and etc slicer-cutter. Available cut options: full cut, partial cut, two sided cut (butterfly). Suitable for products with dimensions: width up to 150mm, height up to 80mm. Adjustable cut height and width, adjustable conveyor and cutting speed. Capacity approx 100pcs/min. With castor wheels, fully stainless steel, CE, made in Europe Condition brand new, with warranty, ready on stock for shippment. Csdpoinwg Iofx Ad Djgt

Condition: good (used), Oerlikon Type: Optitome² 2040 HPi / CPQ170628608 Dimensions: Length: approx. 5325 mm, Width: approx. 3050 mm, Height: approx. 2000 mm (machine body) Max. cutting area: 1000 × 2000 mm, 1500 × 3000 mm, 2000 × 4000 mm Max. material thickness: 50 mm Longitudinal drive X-axis: dual-sided brushless 300 W motors, maintenance-free precision gearboxes Transverse drive Y-axis: brushless 300 W motor, maintenance-free precision gearbox Mechanical guidance: linear guides on all axes Positioning speed: 15 m/min Cgjdpfey Nay Aox Ad Dst Cutting speed: 10 m/min Positioning accuracy: ±0.1 mm Cutting table: sections of 600 mm each, pneumatic extraction control, diffuse extraction Support grids: 100 – 150 mm Plasma unit: NERTAJET HPI 300 / 300A / NERTAJET 50 Oxy-fuel cutting: up to 50 mm cutting thickness Cutting current: 15 – 300 A Plasma power source output: 82 kVA Duty cycle: 100 % Plasma unit dimensions: approx. 820 × 710 × 930 mm Plasma unit weight: approx. 350 kg Protection class: IP21 Chiller capacity: 2475 W Tank capacity: 30 l Power supply: 230 V Power input: 1.7 kW Chiller weight: 65 kg Dust extractor air flow: 5,000 – 8,000 m³/h Pressure: 3,100 – 2,400 Pa Filter class: H13 Separation efficiency: 99.9987% Total weight: approx. 3600 kg Condition: used (machine as shown in images) Scope of delivery: (See image) (Specifications and technical details subject to change and errors!) For any further questions, please feel free to contact us by phone.

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Cgsdpeul Tm Ejfx Ad Djt Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Cgjdowdutmopfx Ad Djt Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Cgedpfxsr Elwke Ad Det Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided. Csdpjwf Nn Iefx Ad Degt

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Cjdpfx Aodzqnyjd Dogt Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine Cgodpfx Ajif Ek Rsd Dst • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition Cgodpfsfnlkwox Ad Dot • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT Cgodpfjwgc I Rsx Ad Djt • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.