Used Circular Knives Grinder for sale (3,970)

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space required: 1050 x 580 x 1200 mm Weight approx.: 140 kg Pedpsv D E Szsfx Ag Togi

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Pgedpfx Asx E Rx Ujg Tsi Weight: kg Required space: 700 x 400 x 1100 mm

Condition: ready for operation (used), Year of construction: 2014, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Pjdpox E Rxhjfx Ag Tsgi Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight: 34 kg Required space: 500 x 250 x 1120 mm

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Psdjyh Hn Hjpfx Ag Tsgi Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm Pgedexln Ukspfx Ag Toi at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm Pgjdpfx Ael Ra Uieg Tsi

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Grinding wheel drive motor: 1450 rpm Pedjxpv Aqjpfx Ag Tjgi Drive power: 0.73 kW Electrical connection: 380 V, approx. 1.1 kW Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm Pgsdpfx Aehz T Hfeg Tei cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg Pgjdpfxoh I Dvne Ag Tsi

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg Pgsdpfx Ajyv N Naog Tsi

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Pedpfsyv Nvtex Ag Tegi Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch Psdpfsw Dp Ekex Ag Tsgi * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: good (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 3671, power: 0.55 kW (0.75 HP), • Manufacturer: Haarmann • Model: DMPU • Machine type: Universal tool grinding machine Psdpfxsyvpwqe Ag Togi • Application: Grinding of drills, milling cutters, turning tools, cutting tools • Design: Compact cast construction, low vibration Motor • Power: 0.55 kW • Speed: 1400–2800 rpm • Voltage: 380 V • Frequency: 50 Hz Grinding unit • Grinding wheel diameter: 125–150 mm • Drill grinding range: approx. 3–20 mm • Cutter grinding range: depending on clamping devices • Angle adjustment: manual, finely adjustable • Rests: adjustable, usually on both sides Dimensions & weight • Dimensions: approx. 500 × 400 × 350 mm • Weight: 35–55 kg Year of manufacture: 1967

Condition: used, Year of construction: 2013, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm 110 mm 95 mm 135 x 60 mm 120 mm 100 mm 135 x 60 mm 180 mm dimensions of saw-blade 350 x 32 x 3,4 mm machine weight ab. 600 kg Pgsdpfx Ajyvvqdog Tji

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW Psdpfx Aoyvvpmjg Tjgi

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm Pedpfeyvvpasx Ag Togi 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Overall size 1400x1400x2000 mm

Condition: used, Year of construction: 2020, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm Pgodpfx Agsyvvnpj Tei capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: used, Length of the rolling table max. 3.200 mm Saw blade diameter max. 400 mm 45° Pedpoyc Rtrjfx Ag Tjgi

Condition: used, Year of construction: 2011, operating hours: 2,609 h, Automatic Cycle Hours: 4540 hrs Sawing Cycle Hours: 2609 hrs Podpfoyv R Uqjx Ag Tsgi Saw Blade Diameter: 460 / 470 mm Cutting Width: max. 4 mm Blade Types: HSS and TCT (Carbide) Working Range (Round): 10 - 152 mm Working Range (Square): 10 - 140 mm

Condition: ready for operation (used), 2 grinding spindle speeds: 6000 and 12000 rpm Drive motor: 380 V, 0.18 kW Required space: 350 x 100 x 150 mm (height) Pjdpfeyv Dxiox Ag Tegi

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Pedpfx Agewaa Dvo Tegi Cutting area, square (W x H): 20 x 70 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 65 mm Shortest remaining piece length in single cut: 30 mm Length: 2300 mm Width including chip conveyor: 2260 mm Height: 22100 mm Height of material support: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Saw motor power: 18,5 kW Hydraulic motor power: 2,2 kW Cutting speed continuously adjustable: 30-160 rpm Feed speed of the saw: 0,3-30 mm / sec Automatic material feed length, single stroke: 800 mm Length of automatic material feed, multiple strokes: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2,25 mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Pgsdpsyvp S Iofx Ag Toi Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, De Walt crosscut saw Motor 2.2 kW, Pjdpfxsyxnbms Ag Togi Max blade: 300 mm, Adjustable saw blade in multiple directions, Cutting length on the arm: 65 cm, Max cutting height: 8 cm.

Condition: used, Year of construction: 1996, functionality: fully functional, total height: 2,120 mm, total length: 1,360 mm, total width: 1,965 mm, spindle speed (min.): 5,200 rpm, feed length X-axis: 400 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 1,850 kg, center height: 210 mm, grinding spindle motor power: 1,500 W, workpiece diameter (max.): 400 mm, input voltage: 380 V, We offer this used Schneeberger NORMA NC4 tool grinding machine, year of manufacture 1996. CNC-controlled X Y Z A axes. ISO50 dividing head. Complete with coolant tank and pump. Pgjdpfxjyw Tz Ao Ag Tei If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: good (used), Code: 0330 Brand: FBR Model: L 85/1500 - CE Standard Automatic belt sanding machine with double gooseneck for wood, joinery, furniture, window frames, aluminum, metals, and various materials - CE Standard Psdjyu Ttropfx Ag Tsgi Technical data: Work surface dimensions mm 1450 x 700 Automatic table lift Vertical stroke mm 750 Motor power 3 Hp three-phase Max belt length mm 4500 Belt width mm 120/150 Suction port diameter mm 100 Overall dimensions mm 2550 x 1250 x 1550 h Weight kg 320