Used Circular Saw Sharpener for sale (6,063)

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm Gedjxiu Dtepfx Anxjit max. cutting width 600 mm max. cutting height 170 mm motor 11 kW

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Gijdpfx Anjwx R Ivjxst

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 18 kW (24.47 HP), Still a very presentable longitudinal saw with a powerful 18.5 kW saw motor max. cutting length: 6.2 m max. cutting width: 0.45 m max. cutting height: 0.17 m Gjdpfxey D Drxe Anxsit with hold-down device with digital size display Ready for demonstration in the workshop.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm Gijdpfxjfc T Ufe Anxot capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm Giodpjfmck Hefx Anxst total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Godjuyyhaepfx Anxsit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Gisdsv A Hgdopfx Anxet Weight 570 kg Total power requirement 3 kw

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. Giodpfx Aneyk Icaoxjt - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,-

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised Gisdpfx Anomftiwoxet ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Gisdpfxevmfawe Anxst Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws Giedpey Da Iiefx Anxot with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Trimming saw Esterer DKE Gijdpoy Da Hfjfx Anxst Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Location: Germany, near Chiemsee

Condition: ready for operation (used), Machine is disconected from power. Giedpfxohva I Is Anxet

Condition: good (used), Year of construction: 2004, sawing machine for non-ferrous metals Giedpfx Ansfkh E Aoxet transmission range up to Ø60 mm respectively 70 x 70 mm cut-off length up to 250 mm engine power: 3 kW rotation speed: 180 - 4800 rpm sawing blade up to 250 mm pneumatic voltage flow cooler control system renewed: 2011 ESTA oilmistseperator type AS 600, year of construction: 2006 We sell only to companies with registered office in the EU. Dispatch type: ex works Payment term: Prepayment

Condition: good (used), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m max. cutting height 100 mm Gedjwumwfspfx Anxsit motor 12 kW total length 5.8 m total width 1.55 m

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Gedpfxoy Ehx Ee Anxjit Cold circular saw - Machine light - Coolant system

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below Gijdpfx Aeq E Ivtenxet for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg Gisdpfxjywnvne Anxst

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Giedpfey D Sywox Anxst

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Giodpfx Anoy Dcmboxjt Feed length, double stroke 1200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Gsdpfxey Afvis Anxsit Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Giodpfxeygx Dye Anxst Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, HSS circular saw blades for steel machining Giodpfoc R Tyqjx Anxet with some secondary holes: 315 x 2.5 x 32 mm, 90 Z 315 x 2.5 x 32 mm, 98 Z 225 x 1.9 x 32, 90 Z

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm Gisdpfxjb H Info Anxjt saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Godpfx Anewzmvbjxoit - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop