Used Circular Shear for sale (3,158)

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Ndodpowu Tz Rofx Aanef Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Machine weight: 605 kg

Year of construction: 2007, condition: ready for operation (used), Number of knives: 5, scoring pairs: 8, tool positioning accuracy: +/-0.5mm, min. scoring gap: 0.7mm, min. blank width: 82mm, min. scoring distance: 60mm, knife diameter: 240mm, working width: 2500mm, max. corrugated board thickness: 16mm, web speed range: 30m-120m/min, max. stack height (outfeed): 1400mm. Machine dimensions X/Y/Z: approx. 4300mm/3500mm/2200mm, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Ndedpfex I Rp Ssx Aanef

Condition: excellent (used), Year of construction: 2024, Sawblade tiltable 46 ° Length of the rolling table 3000 mm Nsdpox Ak Hwefx Aanodf cutting width 13000 mm Motor output 7,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 3000/4000/5000 U/min. weight of the machine ca. 1250 kg

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting Panel Saw T 73 by Martin with 3-axis scorer and 3m table Sliding table length: 3000 mm Saw blade tilt: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Main drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable via handwheel from the front and moveable by hand Tilting angle and height adjustment are motorized Crosscut fence with 2-point support, up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Dust extraction outlets: 120 + 100 mm Sliding carriage can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scoring unit, fully motorized, adjustable while the machine is running 2 safety hoods Mitre fence for acute angles Tool compartment Emergency stop switch Ndjdjxtvcxspfx Aansf Operating manual CE marking Machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paint, only partially touched up. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "other offers from this provider".

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Ndjdpjxta Dmofx Aanof

Condition: good (used), Year of construction: 2009, WAGNER/TRENNJÄGER PMC 12 S Longitudinal Circular Saw Year of manufacture: 2009 Machine number: 200 Njdpfx Ajx H R Hbjanodf Equipment: - Round material up to 360 mm - Square material 300 mm x 300 mm - Flat material 1,000 mm x 150 mm - For further data, see brochure - Additional: 2nd saw blade, diameter 910 mm Scope of delivery includes: - Operating manual/documentation For details on features, operation, transport, machine overview, and manufacturer’s brochure – please see PDF. Image, content, and specifications are provided without guarantee, therefore not binding. All other accessories shown in the photos and video are not included in the scope of delivery and thus are not part of this sale. The scope of delivery only includes the accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern weight of the machine ca. 1,4 t Nsdpfx Ajw Sygmeanodf

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm Njdpfxsx I I Uxs Aansdf - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm Njdpfxsx Avq Is Aanodf plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good/well-maintained condition (!!) Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device - Front finger guard - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm Ndjdpfx Ajx Nalrsansf machine weight: 5600 kg Very good, ready-to-use condition.

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale Ndjdpfx Aaexx D Efonsf 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: used, Martin T 60 panel saw heavy precision panel saw axis positioning control 5.7 touch screen automatic scoring unit motor 5.5 kW saw blade can be tilted 0 - 46° saw blade diameter up to 400 mm edging length 3000 mm cutting width with parallel stop 1250 mm width stop adjustment automatically via NC control width stop reading via touch screen pivoting control panel above table CE version machine is WORKSHOP REFURBISHED in TOP CONDITION Nodpfx Aexx R T Nsanjdf from Lieboch warehouse

Condition: new, The KHS E 1000 Manual Guillotine Shear is an essential tool in any locksmith's shop, designed for the precise and robust cutting of large steel plates. This classic manual plate shear features a sturdy cast-iron construction, ensuring durability that can withstand the demands of multiple generations of use. With a working length of 1,040 mm and the ability to handle plate thicknesses up to 1.5 mm while maintaining safety, it combines efficiency with operator comfort thanks to its counterweights and adjustable table stop. The KHS E 1000 also includes a conveniently adjustable back-gauge, making it easier to produce consistent cuts. Request a quote today to enhance your sheet metal processing capabilities with this reliable manual guillotine shear, a perfect fit for any guillotine shears category. Nsdsn D Ehvopfx Aanedf

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Ndsdsx Avtvjpfx Aanef Weight: approx. 180 kg

Condition: good (used), Year of construction: 1981, Panel saw - 3 m sliding table Ndedpfx Aasx Akv Ejnjf - 800 mm right of the blade - Year of manufacture: 11/81 - 400 mm blade - 5.5 kW - No extraction system included, but was previously mounted to the wall

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade tilt display: Scale Cutting height display: - Nsdpfsxzfw Iox Aansdf Rip fence display: Scale Crosscut fence display: Scale Maximum saw blade diameter: 550 mm Saw blade diameter fully retractable below table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Ndsdpfxjl Sm N To Aanof Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z Nsdpfx Aaex Igndonsdf New blade set Fully functional Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Nodpfx Aex I Sfusanodf Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Nedpfxjxxd D Us Aanodf Sequence repeat function • Auto-cutting (Flying cut)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: automatic, sheet thickness (max.): 10 mm, Baykal MGH 3100x10 from 2008. Plateshear in neat condition. Available directly. Njdpfx Aajx Nbcfonedf

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Nsdpoxzfwuofx Aanjdf Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 4,100 mm, warranty duration: 12 months, controller model: CutLink, back gauge: 750 mm, control type: NC control, stroke rate (max.): 35 1/min, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Demonstration machine motorized guillotine shear Producer CIDAN Year of manufacture 2023 Cutting length 4100 mm Sheet thicknesses 1.50 mm at 400 N/mm² Nedpfx Ajwxu S Eeanodf Sheet thicknesses 0.60 mm at 700 N/mm² Sheet thickness 2.2 mm at 200 N/mm² Up to 35 strokes per minute Equipment: Touch control CutLink Backgauge range 5-750 mm Pneumatic sheet holding device forward depositing Sheet chute forward depositing (return to sender) Extendable table support range 800 mm LED cutting line lighting Machine is available in our showroom in A- 6800 Feldkirch Delivery time: immediately

Condition: like new (used), For sale is a used Format4 Kappa 450 sliding table panel saw with a cutting length of 2800 mm. This machine is currently being used as a showroom display unit and is therefore in like-new condition. Technical specifications: - Cutting length: 2800 mm - Cutting width: 800 mm - Cutting height: 155 mm - Max. saw blade diameter: 450 mm - Electrically adjustable height and tilting Ndjdsw Hd Sqepfx Aanjf - Extraction port Ø 120 mm - Motor power: 7.5 kW / 10.2 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! For more information call: 06244-20299 Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-A0117

Condition: new, Year of construction: 2025, – Capacity 1360 x 3 mm – NC back gauge – Small cut sheet metal pieces are automatically ejected at the front of the machine – Safety light barriers at the rear – Front sheet metal supports – Cutting line illumination – Foot operation – Emergency stop – 400V Ndedpjx Izkasfx Aanof