Used Circular Shear for sale (2,977)

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 stroke rate approx.: 9 - 17 /min Nksdexrp Thjpfx Ah Rjw gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame) Nkedpfx Astx Uqaoh Rsw

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm clear distance between columns: 2050 mm throat depth: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Nedehy Tqaepfx Ah Rskw Weight: 2.7 tons

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm Nkedohz T Hfspfx Ah Rjw cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Condition: ready for operation (used), working width: 3000 mm metal sheet thickness: 4 mm Nedpfsh D E Hhjx Ah Rskw throat: 100 mm rear stop: 500 mm power: 380 V, 7,5 kW space needed: 3400 x 1600 x 1700 mm weight: 4500 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg Nkjdpfxoh I Dvns Ah Rew

Condition: used, Year of construction: 1994, sheet width 4000 mm plate thickness 6 mm distance between columns 4010 mm machine weight ab. 7.500 kg total power requirement 16 kW rear stop 700 Njdoyv Nncopfx Ah Rekw

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min Nodpfjyv N Naex Ah Rskw 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop Nksdpfxeyv N I Ae Ah Rjw - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1996, 10 mm Punching force 55 to 40x10 mm Nkjdpfx Ahoyv N Iie Row flat steel 300x15 oder 200x20 mm L-beam 90° 120x120x10 mm L-beam 45° 70x70x7 mm 40 mm square edge steel 40 mm 37 /min. throat 250 mm weight of the machine ca. 1.800 kg

Condition: used, Year of construction: 1984, hole diameter in sheet thickness Ø 30 in 12 mm Nkedpoyv N Ebofx Ah Rjw hole diameter in sheet thickness Ø 19 in 19 mm pressure capacity max. 45 to weight of the machine ca. 1.700 kg

Condition: used, Year of construction: 1977, sheet width 3050 mm Nodpfxoyv Nzce Ah Rskw plate thickness 6 mm weight 7.000 kg range L-W-H 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch

Condition: used, Year of construction: 1990, sheet width 2500 mm plate thickness 4 mm cutting angle 1,49 ° 40-80 column arm 200 mm Number of hold downs 13 Stück back stop - adjustable 5-1000 mm table height 750 mm oil volume 85 l air pressure - required 5 bar range L-W-H 3100x1900x1500 mm weight of the machine ca. 3.600 kg Nkodeyv Nx Ispfx Ah Rsw Accessories: -Control RAS Multicut 2000 -Sheet metal holding device -Foot switch -Angle stop -Sheet metal support arms -Side protective grilles

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm Nksdpfx Aheyv Nvto Rsw turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms Nedpfxsyv Nt Se Ah Rjkw - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: used, machine weight ab. 960 kg Nkodpfx Ajyv Np Hjh Rew dimensions 1300 x 800 x 1600 mm

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: Nsdpfx Aeyv Nn Aeh Rskw - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1971, sheet width 2550 mm plate thickness 3,5 mm range L-W-H 3200x1300x1400 mm Njdpfxjyv Nmxo Ah Rskw weight of the machine ca. 3.000 kg

Condition: used, Year of construction: 1995, plate length 2500 mm plate thickness 2,5 mm Nedpfeyv Nlnox Ah Rokw

Condition: used, Year of construction: 1990, sheet width 2000 mm plate thickness 1,5 mm Nksdoyv I Tqspfx Ah Rew

Condition: good (used), Year of construction: 1975, Used plate shears from Safan Nkjdpoxlgmrsfx Ah Rsw Capacity 3100 x 13 mm Electric back gauge Adjustable cutting angle Machine comes as from work, fixed price based on so along

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard Nkedpfsw Dp Ekex Ah Row PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: refurbished (used), Year of construction: 2018, The JMC 400 alligator shears can easily cut solid cast parts of 50x50 mm, flat iron of 230x12mm or 178x25mm. See for yourself how powerful these alligator shears are with a weight of 2000 kg and a maximum shearing force of 120 t. Nksdpfx Aevntm Ijh Row

Condition: used, Year of construction: 2013, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm 110 mm 95 mm 135 x 60 mm 120 mm 100 mm 135 x 60 mm 180 mm Nedpfx Aheyvvqdj Rokw dimensions of saw-blade 350 x 32 x 3,4 mm machine weight ab. 600 kg

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW Nkodpfxsyvvpme Ah Rsw