Used Cleaned for sale (6,162)

Condition: used, functionality: fully functional, mileage: 5,20,171 km, power: 331 kW (450.03 HP), first registration: 02/2021, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features BigSpace L-cab, Actros model generation 5, wheelbase 3850 mm Engine version Euro VI, D, 449 Hp,330kW (449hp),2200 Nm, Batteries 2 x 12 V/220 Ah, low-maintenance Mercedes PowerShift 3 Transmission, High Performance Engine Brake ADR type class AT Tank,820l+90l AdBlue,left,735x700x2170 alu.,step, Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Driver comfort Automatic climate control, Power windows, all-round Driver's suspension seat, comfort, Multifunction steering wheel Fold-up co-driver's seat, Armrests on both sides, co-driver's seat Smoker package Auxiliary hot water heater, cab Pull-out refrigerator, under bed Flexible shelving sys.,f. stowage above windscreen, Drawers, under bed, Drawer, under dash support Tilting sunroof, electric, Sunblind, side, driver's side, Sun visor, exterior, transparent Luxury bed, top, narrow, Luxury bed, bottom Fjdpfx Adjxyw Szedegk Technical specifications Continental VDO 4.1 smart tachograph Disc brakes on front and rear axle Electronic braking system with ABS and ASR, Stability Control Assist (ESP) Front spring, 7.5 t, 2-leaf Rear axle - air Tyres 315/70R22.5 Drive program fleet, Navigation system Fifth wheel coupling, standard, Jost JSK 37C Axle load measuring device Heat insulation, additional Safety Cruise control Predictive Powertrain Control Lane Keeping Assist, Traffic Sign Assist Attention Assist Active Brake Assist 5 Technology Multimedia Cockpit, interactive, Preinstallation Mercedes-Benz Truck App Portal, Standard loudspeake Truck Data Center 7 FleetBoard Eco Support, Interface, fleet management system FMS Exterior Fully painted cab LED daytime running lamps, LED headlamps, Foglamps, halogen Headlamp cleaning system, Side marker lights, Ambient lighting Air deflectors, corner panels, Kerb mirror Front mirror, heated, MirrorCam, MirrorCam switch, on bed Locking system, with central locking, 2 remote control keys

Condition: used, Year of construction: 2024, Motor power: 1.5 kW Inlet nozzle: NW 120 mm Rated air flow: 814 m³/h Vacuum at rated flow: 2,180 Pa Filter area: 5.1 m² Manual cleaning including integrated pre-separator Collection container: 135 L Location: Nattheim Fedjxbhz Aspfx Addjgk

Condition: used, Compact Hebrock EURO 3001 edge banding machine for precise edge banding of panel material. The machine enables clean edge processing thanks to automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior design. Technical specifications subject to change. Unit 1: Glue application Fgjdpfx Adexdc D Rjdok Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Fedpfxsx Exatj Addegk Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: used, Year of construction: 2022, operating hours: 2,400 h, Serial number: VCEC300EA0031xxxx Fsdsx Dqukjpfx Addjgk Please contact ATS Norway for more information Please provide reference number upon request: 19811 Specifications: Model year: 2022 Operating hours: Approx. 3100 hours (can be) Engine power: 189 kW Weight: 36,397 kg Chassis: See pictures Engcon Rototilt Sanding bucket Excavator bucket Central lubrication Rear view camera Air conditioning/AC Radio/DAB GPS available at an additional cost Delivery by appointment Description: 2022 Volvo EC300EL excavator with Engcon Rototilt and both a cleaning and a digging bucket. The machine has approximately 3100, but the hours may increase as it is currently in operation. GPS can be included for an additional price. The machine is well maintained and ready for further work. Hours: 2400 Total Weight: 36397 Kw: 189

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion Fjdpfswhu Hhex Addegk the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Fsdox Edmpopfx Addegk Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: excellent (used), Year of construction: 2013, For sale: Complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1000 kg. Year of manufacture: 2013. The set is fully operational and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – robust and reliable unit * Drive type: electric, chain * Total crane length: 1046 cm (10.46 m) * Stable main girder + cable and power guides Fsdpfx Aewcrazsddegk * Inspection possible on site – previously operated in a clean production hall The crane is in very good technical condition – well maintained and ready to use. Ideal for workshops, industrial plants, warehouses, metalworking shops, or tool rooms.

Condition: used, engine: 1,3 kW mass: 37 kg Fgjdpfx Adot N Akbedjk working width: approx. 40 cm The Nilco BA33-33E cleaning machine is a compact, powerful scrubber dryer for the thorough cleaning of hard floors.

Condition: used, functionality: fully functional, power: 41 kW (55.74 HP), fuel type: diesel, empty load weight: 8,590 kg, Year of construction: 2008, operating hours: 7,167 h, drive type: Diesel, Mini Excavator Condition: Ready for use and fully functional Fgodpsx Amiuefx Addok Technical Condition: Good Description: Crawler Excavator - Tracked Excavator - KOBELCO - NEW HOLLAND E80BMSR-2 - Year of manufacture: 2008 - 7,167 operating hours (as per display) - 8,590 kg operating weight - hydraulic quick coupler - 2 pcs. NEW trenching buckets 40 + 80 cm - 1 pc. used ditch cleaning bucket 160 cm - cabin, heating, work lights - 4-cylinder ISUZU diesel engine, 55 hp - good rubber tracks - no cracks on the arm - excavator in good original condition!! Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab.

Condition: good (used), functionality: fully functional, SIMI Shelving Press 300x130 cm Specification: • condition – used, serviced and fitted with new seals • manufacturer – SIMI Fsdsx Ezr Ejpfx Addogk • shelves dimensions: 300 x 130 cm • max clearance between shelves: 460 mm • shelves are straight, clean, without dents or damage • 6 pistons, each 80 mm diameter • new seals on all pistons • pump motor: 1.5 kW • max pressure: 400 bar • automatic pressure compensation in case of pressure drop • glueing cycle timer • shelves prepared for water heating from central heating (top shelf is leaking) • original paintwork • weight approx. 4500 kg • overall dimensions: 380 x 155 x 225 cm (L x W x H) Additional information: • perfect, factory technical condition • displayed photos show the actual condition of the item for sale • possibility to switch on and test the device on site

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Corner centering from the outside of the window Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with Fgodpfxjwh R Tko Addok 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. This line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while adhering to the highest safety standards. Comprehensive Resource Recovery Technology The recycling process is based on a sequence of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust collection and fully sealed material conveying Depending on the selected process configuration, the system allows recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers engineered for lithium batteries • Capable of processing charged batteries through gas protection technology and multi-level fire prevention systems Fgjdpfx Ajxz Dd Heddok • Three-stage crushing ensures optimal material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for light and heavy material separation • Combined static and dynamic screening for optimal black mass recovery • Precise gravity separation for copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the option of condensing and recovering electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and enhances black mass quality • Advanced exhaust treatment with catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design for flexibility, ease of maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal ensure a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: custom-designed to fit client facility requirements Optional Extensions: 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High automation level and advanced process safety • Global references with numerous installations in Europe and Asia • Comprehensive support from design through commissioning to after-sales service.

Condition: used, power: 95 kW (129.16 HP), fuel type: diesel, Year of construction: 2013, operating hours: 5,740 h, Empty weight: 23.000 kg Track width: 70 cm Auction item. Fjdpfxjx Ezz Ts Addjgk Excavator in working condition. Sold with ditch cleaning bucket.

Condition: used, consisting of: Decorative film + aluminum backing plate + circuit board. new decorative film (manufactured in 2019), Control panel 23 001 0078, ID no. 10017781 / 912053002, br. original circuit board cleaned and checked, Fgsdpslkch Sefx Addjk br. original aluminum support plate, cable on request.

Condition: excellent (used), Year of construction: 2006, Engel Victory 330/90 / Machine in very good technical condition Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: approx. 190 g Injection pressure: 1665 bar Dosing volume: 201 cc Clamping unit: Clamping force: 90 t Bar spacing: 0x0 mm Clamping plate size: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touchscreen Additional equipment: Machine in very good technical condition The machine worked in so-called "clean production" for the food industry Barless machine Control with hot runners x 6 Injection unit hardened - bimetal Machine was regularly serviced by the authorized Engel service Dimensions: Fgodpfx Adsxz Aklodok Weight: 7300 kg Length/Width/Height: 4.35x1.48x2.05 m Drive: Pumps/Motor: 15 kW All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 Fgodswrpxtepfx Addek The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp.

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. The line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while maintaining the highest safety standards. Comprehensive Resource Recovery Technology The recycling process utilizes a series of physical and thermal operations, including: Fgsdpjxz A R Esfx Addsk • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust removal and fully sealed material conveying Depending on the selected process configuration, the system enables the recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers specifically designed for lithium batteries • Capable of processing charged batteries thanks to gas protection technology and multi-level fire prevention systems • Three-stage crushing process ensures optimum material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for separating light and heavy fractions • Combined static and dynamic screening for optimal recovery of black mass • Precise gravity separation of copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the possibility of recovering condensed electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and improves the quality of recovered black mass • Advanced exhaust treatment system utilizing catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design ensures flexibility, easy maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal systems maintain a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: Custom-designed according to client facility requirements. Optional Extensions: • 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High level of automation and advanced process safety • Global references with numerous installations across Europe and Asia • Comprehensive support from design to commissioning and after-sales service.

Condition: used, Year of construction: 2017, operating hours: 3,557 h, Colour: Red Empty weight: 14.000 kg Working width: 3.600 cm Volume of the tank: 8000 l Operating speed: 20 km/h Auction item. Fjdpfxex Eydyo Addsgk Sprayer in working condition. Sold as seen in the photos. Stainless steel tank capacity 8 000 liters. Trail-Control steering axle. Air axle suspension. Clean water tank capacity 530 liters. Clean water tank capacity for hand washing 15 liters. Working boom height from 0.3 meters to 2.5 meters. Sprayer operating speed from 4 to 20km/h. Boom control PRO with 6 sensors. Automatic switching on and off of working boom sections controlled via GPS. Number of sections 17 pcs. Stainless steel spray lines. Mixing equipment controlled from the main sprayer computer. Lower hitch K80. 3 inch quick connect coupling for automatic filling of the main tank. 3 inch suction quick connect coupling. LED night beam lighting with flushing. Sprayer has sprayed 47 838 hectares.

Condition: used, 2 belt cross sander Heesemann MFA 8 for intermediate sanding of varnish and sanding of wood panels and other workpieces. working width: 1300 mm Clearance height: max. approx. 140 mm Fgodpfx Adexr N I Ejdjk clearance height: max. approx. 140 mm Aggregate 1: cross-section Unit 1: Electronic print bar Aggregate 2: longitudinal grinding Unit 2: Cross-section Unit 3: longitudinal grind Unit 4: cleaning brush

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m Fgodpfxexzz Nys Addok All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, The condition of the machine is very good, it has performed only 123,000 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: Fgedpfxjm Ak R Ue Addjk dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Fgodpfxowrpwio Addek The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Fedpfjnzh Abox Addsgk

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Fgsdpfx Asvr U Syoddek Currently is working.