Used Cleaned for sale (6,033)

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 11/2026, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement width: 1,000 mm, Rego Herlitzius Roto Shop DL circular knife machine Iodpfxjmfnz Tj Aabjbc stainless steel version mobile, with oiling Knife reground and coated manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread chute: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Used machine cleaned with guarantee Visit our large bakery machine park!

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Ibedpfx Aoxnqaujabjc Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Washer capacity up to 2500 pieces/hour, steam heating Isdpfjxpg N Ijx Aabsbc

Condition: refurbished (used), Year of construction: 2015, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC4, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16-2 (KR16-2 Foundry option is also available) Condition: Used & Tested& Refurbished Year: 2015 (2014 option is available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 1 year of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. Ibodsw H I Snspfx Aabjc • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, Year of construction: 2018, Nominal air flow: 5,089 m³/h Inlet nozzle: Ø 300 mm Negative pressure at nozzle: 2,434 Pa Filter cleaning: compressed air Chip collection volume: 3 x 165 liters Motor power: 7.5 kW | 400 V - 50 Hz / IE3 Sound pressure level: 71 dB(A) Max. compressed air connection: 6.0 bar Protection: 25 A Dimensions (LxWxH): 3,050 x 1,058 x 2,361 mm Weight (net): approx. 952 kg Stock location: Nattheim Ibsdpfjxnlapjx Aabec

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 58 h, functionality: fully functional, The KIRA B 50 cleaning robot from Kärcher is a useful addition to any cleaning team. Intelligent, autonomous, and with the functionality of a scrubber-dryer, it efficiently handles floor cleaning of medium to large areas with consistent cleaning results, freeing up cleaning staff to focus on more demanding tasks. Isdpfxjv Unlxo Aabjbc

Condition: excellent (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: S/N 1193, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, rotary table diameter: 600 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 35,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Fully operational, machine in perfect condition for sale! * 5-axis simultaneous machining * HEIDENHAIN iTNC 530 controller * Spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW * HSK-A 63 tool magazine with 34 tool stations * Additional side tool magazine TM99 with 99 tool stations Ibedpfx Aajxpf Hfsbjc * HEIDENHAIN remote controller * KinematicOpt * DCM Collision (HEIDENHAIN) * Job InfraRed touch probe with HEIDENHAIN software * High-pressure through spindle cooling system (38 bar) * Pressure air blow through the spindle * Chamber mist extractor * Tool cleaning system * Chip (swarf) conveyor * Oil skimmer for coolant tank * Coolant gun * Coolant washdown for chamber * Remote machine diagnostics (via network) * Voltage 400 V, 50 Hz, TN-S Machine is located at a production facility in Mielec 39-300, Poland, connected and available for trials. Buyers – Welcome!

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Iodpfexnprcjx Aabjbc Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2024, operating hours: 934 h, 2024 | Liebherr R998 LC-V | Used Demolition Excavator | 934 hours 📍Location: Germany, Sindelfingen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 898000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 63 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Well-functioning and neat Liebherr 998, low hours but has already done some work, swing brake not entirely optimal anymore, also the hydraulic pump makes a singing sound, hydraulic level very low, left stick cylinder leaks, machine could use a cleaning, and the tracks may need some tightening, other than a few scratches and dents still a neat excavator. Iedjxnff Eepfx Aabobc 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38272 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2008, condition: good (used), Hot air sterilizer, sterilizer -Manufacturer: Melag, hot air sterilizer type Sterilizer 75 -Interior: W/D/H 190/295/70 mm / 2 tray supports -Voltage: 230 V -Power: 690 W -Dimensions: W/D/H 310/415/H260 mm -Weight: 13.8 kg Ibjdpfewha T Tsx Aabjc

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 80 mm, travel distance Y-axis: 260 mm, • Fanuc 31i-B5 control • 15 inch LCD color screen • Y-axis 260 mm (+/- 130 mm) • B-axis swivel range 230° (+/- 115°) • Milling spindle drive power 15/22 kW • Milling spindle speed max. 12,000 rpm • Main spindle drive power 22/26 kW • Speed 4,000 rpm • Spindle nose A2-8 • Bar capacity main spindle 80 mm • Counter spindle drive power 15/22 kW • Speed 4,000 rpm • Spindle nose A2-8 • Direct position measuring systems X1, Y1, Z1-axis • 12-position turret • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Chuck foot switch • Coolant system with 4 pumps • Automatic central lubrication • Automatic machine shut-off • Hinge belt conveyor right side • LED work area lighting • 1 set machine documentation • CE specification FANUC 19" HMI Touch Panel iH Pro instead of the 15" standard screen HMI touch panel from Tool holder: Capto C6 Number of slots: 80 pieces Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Passage 81 mm • Jaw stroke in diameter 8.8 mm • Base jaw toothing 1.5 mm x 60° • Speed max. 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K Iedpfx Aewpkp Ieabebc • Passage 81 mm • Piston stroke 25 mm • Speed max. 4,800 rpm SMW power clamping device Hydraulic full stroke cylinder SIN-S 125 • Pressure max. 70 bar • Tensile force at 40 bar 41 kN • Speed max. 6,000 rpm Bar feeder interface incl. "Optional block skip" 3-color signal lamp Tool setter (manual) Integrated unloading device counter spindle • Diameter max. 80 mm • Length max. 200 mm • Weight max. 3 kg Automatic work area door Belt switch automatic work area door Transformer 120kVA TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance KNOLL KF300/1800 70 bar with throughflow cooler alpha 9-E - Clean water tank: 1,800 l capacity - 1 x low pressure pump: 150 l/min / 3.1 bar - 2 x medium pressure pump: 40 l/min / 7 bar - 1 x high pressure pump: 20 l/min / 70 bar - 1 x frequency converter high pressure pump - 1 x double switch filter - 1 x throughflow cooler alpha 9-E - 7 pressure stages KNOLL scraper belt conveyor 500 K-1 Conveying height 1,700 mm Discharge height above floor 1,150 mm

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: E21SJ2307......., The iCombiPro is the latest combination steamer from RATIONAL. The iCombiPro 20.1/1 Gas model with 20 GN 1/1 racks is easy to operate, even for unskilled personnel, allowing you to achieve outstanding food quality without requiring constant supervision. The unit has been inspected in our in-house professional workshop and is fully functional. The ultra-fast interim and self-cleaning functions keep your device spotless. Sample photos are shown – originals will follow shortly. The combi steamer is available from 44 kW. You will receive an invoice with VAT shown separately. Isdpfx Aaexnzvmobjbc Condition: Used, inspected, and fully operational Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door clearance for transport W x H: 900 x 1900 mm Serial number: G21SJ2307..... Year of manufacture: 2023 Max. loading per rack: 5 kg Max. total loading: 100 kg Weight (gas unit): 273 kg Electrical connection data: Voltage: 1 NAC 230 V Gas connection load: 42 kW Fuse: 16 A Water connection data: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further features: Temperature range: 30°C to 300°C Automatically senses the current cooking chamber conditions Recognizes the size, loading quantity, and condition of the product, and calculates the desired browning Learns which cooking habits are frequently used and implements them Determines the ideal cooking process for the desired result MyDisplay – user-customizable, user-specific operating display TFT color display and touchscreen Application and operating manual accessible on the unit display Core temperature probe with automatic error correction for incorrect positioning and positioning aid Glazed compartment door, energy-saving LED interior lighting Including energy consumption display Humidity control: precise percentage humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adaptation to installation location (altitude, climate, etc.) Device door with ventilated triple-glazed panel and swiveling inner pane Direct-waste connection according to SVGW permitted Splash and jet water protection IP X5 Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection with date and time settings Inner and outer material made from stainless steel DIN 1.4301 WiFi module integrated Service: We are happy to arrange certified Rational service support for you throughout Germany. Are you looking for a specific Rational model? Contact us—we have access to an extensive range of used and new equipment. We are happy to advise you on all types of units, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our equipment service for you: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional and competent advice—before and after your purchase Flexible options for shipping or self-collection Provision of operating manuals, wiring diagrams, and spare parts Complete range of accessories at attractive prices

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ECO-DEVNYA-I8, total length: 6,490 mm, total width: 2,000 mm, total height: 6,260 mm, overall weight: 21,500 kg, power: 44 kW (59.82 HP), Equipment: documentation/manual, Hazardous Waste Incineration Plant – Inciner8 I8-1000 Location: Devnya, Bulgaria Manufacturer: Inciner8 International Ltd., United Kingdom Year of manufacture: 2018 Condition: Installed, fully operational, complete documentation and CE certification General Description The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system. Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED). The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits. Main Technical Parameters: • Type: Dual-chamber incinerator with secondary afterburner • Model: Inciner8 I8-1000 C/W Eco Flam Burners • Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type) • Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time) • Loading system: Hydraulic RAM feeder with automatic door and safety interlocks • Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion) • Operation mode: Underpressure – 2 mbar (ID fan with frequency control) • Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C) Flue-Gas Cleaning System (Pollution Control System – PCS): Three-stage treatment: 1. Heat exchanger – rapid cooling of flue gases below 425 °C 2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF) 3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds Key features: • Ceramic filter candles with automatic reverse-pulse cleaning • Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³ • Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds Continuous Emission Monitoring System (CEMS): • Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature • Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.) • Data management: USB / Internet output, software package included Certification & Compliance: • CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS) • Manufacturer ISO quality certification • Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC) • Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC Advantages: • Fully automated and safe operation with PLC control • Suitable for hazardous, medical, and industrial waste streams • Minimal residual ash and low OPEX • Heat recovery option for hot-water utilization Ibjdpfx Aasxlcw Tsbjc • The system is ready for dismantling and relocation Delivery terms: EXW Devnya, Bulgaria (Ex Works – pickup from site)

Condition: as good as new (ex-display), GAU JING GN 6S23 four-sided planing machine TECHNICAL PARAMETERS: - 6 heads - electric brakes - electric planing thickness setting - universal spindles - ideal for wet and dry wood - used planer, very good condition -max width of processed workpiece 230mm max height of the workpiece 160mm - 6 spindles: 1) horizontal bottom 230mm 7.5kW 2) vertical right 160mm 7.5kW 3) vertical left 160mm 7.5kW 3 spindle electrically adjustable front/rear 0,4kW 4) horizontal top 230mm 18.5kW 4 spindle electrically adjustable up/down 0,4kW 5) horizontal bottom 230mm 7,5kW 6) universal 230mm 7.5kW -universal spindle electrically adjustable up/down -all spindles adjustable up/down, right/left -all spindles equipped with electric brake Ibodpfx Asul Ulpsabsc -diameter of spindles 1,2,3,4,5 50mm -diameter of universal spindle 40mm -from top 6 pulling, toothed, metal, torsion input shafts including 2 double ones -from top 5 pulling, rubber, smooth shafts, including 3 double ones -from the bottom, from the side, the pressure on the introduction -from the bottom 2 trailing, metal, toothed, torsion rollers -from below 2 side pressure rollers -from below 2 drawing rollers, smooth, metal -feed on cardan rollers -pneumatically pressed rollers -floating feed speed control on inverter -feed motor 5.5kW -electric adjustment of planing thickness at two spindles -lift motor 0.37kW -length of input table 1800mm -central lubrication -extraction spigot diameter 6x125mm -closed in the cabin MACHINE DIMENSIONS: - Length: 5100 mm - Width: 2250 mm - Height: 1850 mm - weight~5500 kg It is possible to test the machine on site Possibility to finance the machine through leasing or installment. WE ORGANIZE TRANSPORT JBS CARPENTRY MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE You are welcome to contact us in GERMAN at phone number: 663 495 647 We have the following machines: band saws, circular saws, cross and format saws, thicknessers, levelers, grinders, horizontal and vertical drills, feeders, sharpeners, four-sided planer, four-sided planer, three-sided planer, three-sided planer, two-sided planer, thicknesser, leveler, sander, planer, planing machine, planer-thicknesser, planer-thicknesser, thicknesser-thicknesser, thicknesser-thicknesser, cleaning machine, stick machine, shaking machine, parquet machine, edger, edger, edger, for log houses,milling machine, milling machines, bottom-spindle, upper spindle, upper, lower, grinders, long-belt, wide-belt, through-belt, roller, disc, angle, levelling machine, drill, drills, horizontal, radial, milling machine, multispindle, veneering machines, veneering machine, veneering machine, press, presses, lathes, sawmills, briquetting machines, briquetting machine, chippers, chipper, rembacer, tenoning machine, tenoning machines, chiseling machines, chiseling machine, sawdust extraction, extraction, extractor, extractor, fan, fans, sharpening machine, sharpening machines, compressor, compressors, sharpeners, multitasking. Manufacturers such as: SCM, MARTIN, ALTENDORF, JAROMA, MAGGI, GOMAD, GOMAG, GOMA, BAUERLE, WEINIG, WINTER, KOFAMA, FELDER, ŻEFAM, , SICAR, TOS SVITAVY, KUPFERMUHLER, kupermiler, SANDING MASTER, SCHNEIDER, BUTFERING, DANSKAERT, ZOTECH, SAFO, HARBS, HOLZ - HER, ROBLAND, PEMAL, BEZ, KRAKOWSKA, GERMAN, OPTIMAT, JONSDORF, LIGNUMA, OTT, SOP-MASZ, NOES, GUBISCH, HOUFEK

Condition: used, Washer made entirely of acid-resistant stainless steel, total length approximately 500 cm, feed width over 120 cm. The washer was used for washing carrots and parsley root, and it cleans potatoes very well. Ibjdpfoxn Ur Isx Aaboc

Condition: used, Year of construction: 2011, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Control SIEMENS SINUMERIC 840D table-size 2.900x700 mm table weight 2.150 Kg tool adaptor SK 40 DIN 69872 workpiece length - max. 300 mm workpiece weight 6 kg workpiece dia. 80/130 mm 30 fach main drive 18,4/14 kW speed 14.000 mm/min rapid traverse 40 m/min feed 40 m/min Machine on 18.859 h Spindle hours 5.666 h internal coolant system feed 40 Bar/600 l Chip coveyor inkl. total power requirement 55 kW Iodpfx Aov Da T Hjabsbc weight of the machine ca. 14.520 kg dimensions of the machine ca. 10.280 x 7.230 x 3.042 mm Acceleration in the axis 4 m/s2 -Cleaning gun -Portable handwheel -Direct measurement system

Condition: used, Year of construction: 2012, Overview This crate washer with tipping station was manufactured in 2012 by the German company RICO. The 2500 1-Bad model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 600 crates per hour. It is still installed and immediately available. Technical data  Capacity: 600 crates/hour (for modular crates) Crate formats: 20 × 0.5 L crates (400 × 300 × 290 mm, lengthwise) 24 × 0.33 L crates (400 × 300 × 230 mm, lengthwise) 30 × 0.33 L crates (400 × 490 × 210 mm, lengthwise) Baths: 1 Construction: Stainless steel Length (total): 2,500 mm Bath length: 1,500 mm Width: 850 mm Electrical connection: 6 kW Features: Adjustable conveyor speed Large strainer surfaces for improved water filtration Outfeed control to prevent crate accumulation Easy conversion between different crate sizes Ibodpsxn Rv Aofx Aabjc

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E11MH15022443955, This listing is for a CMP 101 combi-steamer from the premium manufacturer Rational, electric version. The photos provided are recent original images. The unit has undergone a fresh inspection in our in-house workshop and is fully functional. The stand shown in the images is not included in the offer but can be purchased at an additional cost. The RRP is €10,390.00 net. You will receive an invoice with VAT shown separately. Service: We are happy to arrange a certified Rational customer service technician for you anywhere in Germany. Looking for a specific Rational unit type? Ask us – we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the ideal choice if you’re seeking a classic combi-steamer that you wish to operate manually. Our used equipment service for you: Ibjdpfxexnzglo Aaboc 6 months warranty on all electrical components High-quality branded equipment at fair prices Professional reconditioning/inspection & expert cleaning Inspected & fully operational – or your money back Flexible options for shipping or self-collection Competent advice – before and after purchase Provision of user manuals, wiring diagrams & spare parts DGUV V3 electrical safety inspection carried out The CombiMaster® Plus from RATIONAL is robust and impresses with its features, which enable top food quality. It supports the chef’s individual craftsmanship with precisely controlled cabinet climate and accurate settings for temperature, humidity, airflow, and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum doorway size for transport WxH: 845 x 1050 mm Power supply: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH15022443955 Year of manufacture: 2015 Condition: used, inspected, fully functional Additional features: Steam mode: from 30°C to 130°C Hot air mode: from 30°C to 300°C Combination mode: from 30°C to 300°C Finishing®: bring pre-prepared and chilled dishes to serving temperature in optimal climate Automatic fat separation for clean cooking chamber air Manual cleaning program 5 fan speeds: whether gentle or robust, the CombiMaster® Plus offers the right airflow for all products Double-glazed door with rear ventilation (swinging for easier cleaning) LED cooking chamber lighting Core temperature measurement via probe Cool-down function High-performance fresh steam generator (automatic flushing and draining) Hand shower with automatic return Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations available by arrangement only

Condition: refurbished (used), Industrial washer for trays, bins and racks. 1.44m x 1.44m x 2.4m high. All stainless steel construction. We can supply the missing ramp if needed. Ibodsu Rgq Ajpfx Aaboc

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Iedpfjvw Dwvox Aabobc Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E11MH15122495141, This is a CMP 101 combi-steamer from the premium manufacturer Rational, in electric version with a 6-month warranty. The images shown are recent original photos. The unit has been thoroughly inspected in our in-house workshop and is fully functional. The base stand shown in the pictures is not included in the offer, but can be purchased for an additional fee. The RRP is: €10,390.00 net. You will receive an invoice with VAT shown separately. Service: Ibsdpfxoxnzb Ns Aabec We are happy to connect you with a certified Rational customer service provider throughout Germany. Looking for a specific Rational device type? Contact us, as we have access to a wide range of used and new products. We provide expert advice on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the ideal choice if you are looking for a classic combi-steamer that you want to operate manually. Our used equipment service for you: - 6-month warranty on all electrical parts - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible choice of shipping or self-collection - Expert advice – before and after purchase - Provision of operating instructions, wiring diagrams & spare parts - Safety inspection according to DGUV V3 The CombiMaster® Plus by RATIONAL is robust and impresses with functions that ensure top food quality. It supports the chef’s individual expertise with exactly controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: - W x D x H: approx. 847 x 776 x 1042 mm - Minimum door opening for delivery W x H: 845 x 1050 mm - Power connection: 400 V / kW: 18.6 / 50-60 Hz - Capacity: 10 x 1/1 GN - Weight: approx. 132 kg - Serial number: E11MH15122495141 - Year of manufacture: 2015 Condition: used, inspected, fully functional Further specifications: - Steam mode: from 30°C to 130°C - Hot air mode: from 30°C to 300°C - Combination mode: from 30°C to 300°C - Finishing®: bring pre-cooked and cooled dishes to serving temperature in optimal climate conditions - Automatic grease extraction for clean cooking chamber air - Manual cleaning program - 5 fan speeds: Whether delicate or robust, the CombiMaster® Plus provides the right air speed for every product - Double-glazed, ventilated door (swivels for easy cleaning) - LED cooking chamber lighting - Core temperature probe - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with automatic return - Dynamic air circulation Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement

Condition: ready for operation (used), Our flagship product. The D250P Depositor is used for a wide range of products and applications across many industries.   Key Machine Capabilities Deposit range 19ml to 1363ml Maximum speed at full stroke - 68 cycles/min Maximum speed at min stroke - 250 cycles/min Additional Features Ijdpjw Hnt Sjfx Aabsbc Ergonomically placed controls at the front and rear of the machine Cleaning and changeover procedures require no tools Interlocked hopper and rotary valve safety circuit Machined Piston seals fit the cylinder bore for extremely accurate deposits Weight control indicator detailing the percentage of stroke Large bore Rotary Valve block to enable the processing of large particulate Moveable and height-adjustable stand with 350mm flexibility A wide range of accessories is available to suit a multitude of applications

Condition: ready for operation (used), 2000 kg per hour capacity. Rasch TR is a precrystallizing machine (tempering machine) for chocolate masses, fat glazes, compound masses and similar fat products. The machine fulfills the requirements of precrystallizing, i.e. it forms smallest stable fat crystal modifications and homogenously disperses them in the melted mass, in an optimal way. Even low-fat masses, with a fat content of min. 26% can be precrystallized. Ingredients such as whole hazelnuts, all forms of chopped or broken nuts and certain dried fruits or small pieces of nougat may be included in the mass prior to tempering. Isdjw Apc Tspfx Aabobc Re-work can easily be integrated and handled. The mass-hopper is double-lined and equipped with a stirrer, so that any inclusions in the mass will be well dispersed. The hopper is heated with a warm water system so that the mass is free of crystals prior to tempering. The forwarding screw is a multi-start screw with a high gradient. The screw's depth is determined by the product to be handled, up to 16 mm deep for masses with nuts. The forwarding screw fulfils two objectives: First of all, it conveys the mass to the place of use with the help of a continuously variable drive. After that the mass crystalizing at the heat exchange surface is mixed with the mass inside the screw. This process guarantees the essential requirements of pre-crystallisation: creation of stable, smallest crystals and regular dispersion in the liquid mass. Rasch special tempering unit type TR is available in five different versions (500, 100, 1500, 2000 und 2500 kg/h). Screw can easily be removed and cleaned.

Condition: ready for operation (used), Same as Hobart PVM for pureeing, straining, stirring, mixing, chopping and emulsifying various types of food · for processing e.g. soups, vegetables, fruit, sauces, purees, jams, mayonnaises, dressings, etc. · Speed ​​can be continuously adjusted using the rotary knob · for kettle sizes from 60 to 600 litres · Hygienic design in stainless steel · Mobile using two CNS fixed castors and two lockable CNS swivel castors · Fan-free motor in hygienic design in CNS (no cooling fins, no fan cooling) · Speed ​​range continuously from approx. 600 to 1,500 rpm. · Switching on and off via pushbutton control, with emergency stop button · Electrical housing in waterproof chrome-nickel steel design · Automatic safety shutdown (motor only runs in the specified working range) · Puree unit made entirely of stainless steel · With two sieves (fine and coarse) Ibedpfx Ajuwrt Noabsc · With ceramic-coated drive shaft · Drive shaft with additional Teflon seal (with FDA approval) · Puree unit can be dismantled quickly and easily, protective ring with captive screws · Service and maintenance-friendly design Technical data: · All switching elements in protection class IP 69K (for cleaning with hot water jets) · Mains connection 230 V AC, 1.85 kW · Supply line 10 m (special cable with high mechanical strength), with Schuko angle plug · Dimensions: Resting position approx. 60 x 90 x 170 cm; Working position approx. 60 x 165 x 140 cm · Weight: approx. 110 kg

Condition: ready for operation (used), Marchant Schmidt Portable S/S Cheese Cuber with Portable S/S Hydraulic System, Allen-Bradley Micro Logix 1400 PLC with I/O, 2 HP PowerFlex Variable-Frequency Drive, Transformer, Contactors, PanelView Plus 600 Touch Screen HMI and S/S Framed Portable Belt Conveyor: Designed to address concerns about floor loss, wire break detection, cleanable design and inline construction. It remains a critical part of the converting process, producing very clean-cut cubes that create the best shred and dice appearance. The machine can process blocks, wheels, and loose trim cuts. Servo actuators maximize production with a custom profiled movement. This allows the machine to adjust the cut force and speed for each cheese resulting in faster production, fewer wire breaks and better-quality cubes. Interchangeable cutting harps are used to alter the cube size which ultimately changes the shred length. Contact Marchant Schmidt for a quote on an industrial cheese cuber to fit your food processing line. Isdpfx Aasu I R Awjbebc Excellent product containment Electric servo actuators maximize production Combination wire/knife harp for cut quality Wire break detection Easy cleaning with removable sections Urethane belts for better hygiene