Used Clean Machine for sale (66,084)

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC Hedpjzuy Insfx Abtot • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Hedpfszkkc Uex Abtjt Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m Hodpfezuy Stsx Abtst • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 105-337, Machine for cleaning the corners of PVC profiles. Hodpfx Ajzdqagjbtot

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Hedpfx Ajzwliisbtot Capacity: 3200 m²/h Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts.

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007 Hjdjw I Ddhepfx Abtet

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP Hsdpox E Rd Dsfx Abtjt The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, Year of construction: 2008, input voltage: 380 V, type of input current: three-phase, input current: 8 A, We are offering this used elumatec EV 884 corner cleaning machine, manufactured in 2008. Type: EV 884 Serial number: 88009009 Rated voltage: 380 V Frequency: 50 Hz Number of phases: 3-phase Rated current: 8 A Date of manufacture: 28.11.2008 Hsdpfszk Eahex Abtjt If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic cleaning machine with rotating table Hedpfxoywcv Ne Abtet CNC cleaning machine

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working efficiency - 2000 m2/h Brush motor - 550W Clean water tank - 60 l Machine weight - 180 kg Battery capacity - 24V/100Ah Cleaning width - 850 mm Hedpfxjyx Dgfj Abtot Vacuum motor - 500W Sewage tank - 55 l Machine dimensions - 140 x 85 x 105 cm

Condition: used, IL 2 control unit for ILSA Multimatic. Hodpjy Uv Uajfx Abtot

Year of construction: 2019, condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm Hjdpfx Abjzndnljtst usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.100 Ltr. volume of flush-tank: 1.100 Ltr.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 420, The washing machine can be inspected while running. It does require some maintenance, but all small parts can still be obtained from the manufacturer. Hjdpfxjzup Haj Abtjt

Condition: used, operating hours: 3,163 h, fuel type: diesel, fuel: diesel, HAKO Automatic Cleaner and Vacuum Cleaner Name: HAKO JONAS 1450 D Power: Diesel Condition: OK, see photos Used features (please call for any defects) Battery is fully charged Large collection basket with discharge container / hydraulic Brush replaced Item No.: 1450 D Manufacturer: HAKO Year of manufacture: see photo - looks good Operating hour meter reads "3163" 2 brushes Fuel: Diesel Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubbing machines in stock Hodpfewffaaex Abtot We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on distance.) All dimensions are approximate.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. Hsdjwty H Dopfx Abtot The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2011, condition: good (used), functionality: fully functional, Clean-o-mat SP 120 Usable basket diameter approx.: 1140 mm Usable height approx.: 500 mm Hedpfx Abjyth Uzetot Loading height approx.: 830 mm Permissible basket load: 500 kg Fluid volume: 210 l Pump delivery rate: 280 l/min Connection data: 230/400 V / 24 A / 50 Hz Pump motor power: 4 kW Heating capacity: 9 kW Rotary basket drive: 0.09 kW 1-stage steam extraction: 0.45 kW Overall height approx.: 1250 mm

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device Hsdpfxoudz D Us Abtst - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: new, Year of construction: 2026, CORMAK DI329 – Compact Dry Ice Cleaning Machine Hedszwfu Sopfx Abtst The CORMAK DI329 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI329 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–5.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI329 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI329 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI329 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 1100 W Power supply 230 V AC, 50 Hz Air consumption 1.0–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–3.2 kg/min (adjustable) Dry ice hopper capacity 7.5 kg Weight 65 kg Dry ice pellet size 3.0–5.0 mm Drive system Direct drive Machine dimensions (L × W × H) 670 × 460 × 900 mm

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Hjdpfxjxd Awde Abtst

Condition: excellent (used), operating hours: 186 h, overall weight: 110 kg, warranty duration: 12 months, I sell used and new machines for dry ice cleaning. The offered unit is used and comes with a 1-year warranty. The machine has only 186 operating hours. The set includes one nozzle of your choice. Also included are a hose for dry ice blasting and an applicator. There is a hose for compressed air supply. Hose holders and transport straps are included. Hjdpfx Absy Hf Hvstet

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, Hsdpszwfulefx Abtst non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: excellent (used), Year of construction: 2012, URBAN welding and cleaning line consisting of two 4-head URBAN AKS 6410 welding machines, including an automatic conveyor belt running perpendicular to the welding machines, with a URBAN SV 800/2 automatic corner cleaning machine with two heads and an infeed/outfeed table. Hsdpfxjzu S Exs Abtet Operated in single-shift production, in very good condition, programmed for VEKA profiles. Includes welding supports, safety fences, and tools for the automatic corner cleaning machine. WINDOWS-based control system, network compatible. Product capacity: at least 200 frames/sashes in 8 hours.

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Hodpfx Ajzfaaxobtjt

Condition: used, Year of construction: 2010, 4-head welding machine Hodezv S Euepfx Abtst Automatic corner cleaning machine

Year of construction: 2023, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of the leasing agreement. Narran ROD 500W pulsed laser cleaning system, IPG Photonics source. The unit is in very good condition. Technical specifications: - Average power - 500 W, - Peak power - 2.5 MW, - Wavelength - 1064-1070 nm, - Frequency - 2-50 kHz, Hjdpfx Abex Ezw Ustjt - Fiber optic cable length - 10 m, - Head weight - 1.5 kg, - Dimensions - 1.4 x 0.6 x 1.1 m, - Unit weight - 195 kg, - Rated power - 3.5 kW, - Power supply - 220/230 V (16A). In addition, the following will be included with the unit: - TBH LN 265 filter – high-efficiency dust extraction system in a compact and mobile design; - Exhaust fan with extraction hose and nozzles; - Special safety glasses for laser operation – 6 pcs; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective screens to demarcate the work area; - PL and EN manuals, PL operating instructions, and workstation instructions; - Domain name, website, and email address. The leasing is managed by mLeasing Sp. z o.o. (mBank group). When submitting an inquiry, please provide the following: - EU VAT number, - Full company name, - Company address, - Name of the person representing the company, their email address, and direct phone number. Based on this information, we will submit a request for the assignment, and mLeasing will contact the interested party directly. The stated price is the sum of the net principal payments, excluding any additional costs, and is for informational purposes only. The offer does not include an assignment fee.