Used Cleaning Chemicals for sale (7,760)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device Kedpfx Asxiwc Sofujdn

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm The system has been technically tested by us for functionality. Kodpfxevyp D Te Afusdn We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Condition: used, Year of construction: 2010, operating hours: 942 h, functionality: fully functional, machine/vehicle number: 103BS00103/00, fuel type: gas, empty load weight: 1,290 kg, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper-suction machine Chassis number: 103BS00103/00 Kdodpfxjy Hmx Ho Afuon Condition: Ready for operation and fully functional Technical condition: normal

Year of construction: 2007, condition: ready for operation (used), A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible. Kodpfx Afjy Hk Tuouodn

Condition: excellent (used), Year of construction: 2013, operating hours: 1,50,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Kdodpfx Asyyxvwsfusn

Condition: used, Dimensions : 800 x 750 x 1975 mm Kodpfob Tffgex Afuedn Washing chamber : 500 x 650 x 625 mm

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Kjdpfxewhu Hho Afusdn Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Kdjdpfx Aswrpxtjfuen

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Kodpfxsnzh Abe Afuedn

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 Kdjdpfjvca Nrsx Afujn is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 Kdodpfju Nf Nzox Afuen is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Kedpfsv Uzr Ejx Afusdn

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Kodpey D Rh Hsfx Afuedn

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Kjdpfx Aenl Ekrefuodn Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed Kjdpfx Asrbg Eusfujdn • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 Kdodperbf R Tefx Afujn - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles Kodpfx Aferbid Ieuodn - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2100218, HGH-SAT SR 1000 2-Tank Spray Cleaning System (Year of Manufacture: 2011) Industrial cleaning system in durable stainless steel construction for efficient aqueous cleaning of components. Equipped with a 2-tank system (washing + rinsing), rotating basket, and fully automatic cleaning cycle. High loading capacity up to 900 kg and powerful spray pressures ensure reliable cleaning results. Ideally suited for use in mechanical engineering and series production. Technical Data – HGH-SAT SR 1000 Manufacturer: HGH-SAT Ultraschall Anlagentechnik Model: SR 1000 Configuration: 2-tank System Type: Spray cleaning system Year of manufacture: 10/2011 Serial number: 2100218 Electrical Data Mains voltage: 230 / 400 V Frequency: 50 Hz Rated current: 45 A Total power: 30 kW Performance Heating power: 24 kW Total connected load: 30 kW Tank Data Cleaning tank capacity: 350 litres Rinse tank capacity: 250 litres Process Spray pressure tank 1: 5 bar Kjdpsyvhtdofx Afuedn Spray pressure tank 2: 3 bar Cleaning medium: aqueous Loading Max. load weight: 900 kg Dimensions Depth: approx. 2600 mm (open) Depth: approx. 1800 mm (closed) Width: approx. 3500 mm Height: 2810 mm Mechanics Basket rotation: 4 rpm Drive: chain drive

Condition: new, Year of construction: 2025, Automate your cleaning process with Superior Series equipment: lifting device with support grid for easy handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 7,500 L Tank capacity: 192L Außenmasse:1330x945x1490mm Useful dimensions grate:680x435x330mm Kodpfx Aof A Nq Hjfujdn Loading weight: 80kg Ultrasonic frequency: 40kHz Ultrasonic power:1200W

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Kodpfx Afepbv Hgjuodn Please contact us to get the best offer!

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 Spiral Casing Pumps in Process Design 1 unit has been fully overhauled; bearings in both the pump and the motor are brand new. The mechanical seal has been serviced by a professional specialist. All gaskets have been replaced with new ones. Pump specifications: - Flow rate: 6 m³/h - Delivery head: 25 m - Pump speed: 1440 rpm - Shaft seal: Double-acting mechanical seal - Seal manufacturer: Burgmann HRZ 13754-00 - Seal configuration: SIC/SIC/-CAR/SIC-VITON - Impeller type: Closed two-channel impeller - Impeller diameter: 277 mm - Bearing type: Rolling bearings - Impeller side: 1x NU411 - Drive side: 2x 7311 - Lubrication (drive side): Oil - Lubricant monitoring: Oil level regulator Materials: - Pump casing: Duplex steel Noridur 1.4593 (9.4460) - Wear plate: Duplex steel Noridur 1.4593 (9.4460) - Discharge cover: Duplex steel Noridur 1.4593 (9.4460) - Shaft: Tempered steel C45+N - Impeller: Duplex steel Noridur 1.4593 (9.4460) - Bearing bracket: Cast iron EN-GJL-250 Ksdpfoiuznusx Afujdn - Shaft sleeve: Duplex steel 1.4462 Connections: - Inlet flange nominal bore: DN 80 - Discharge flange nominal bore: DN 40 - Nominal pressure, inlet: PN 10 - Nominal pressure, discharge: PN 10 Coupling: - Manufacturer: Flender - Coupling type: Eupex NH with spacer sleeve Baseplate: Cast iron Electric Motor: - Manufacturer: AEG AM 132 - Efficiency class: IE 0 - Motor speed: 1476 rpm - Frequency: 50 Hz - Rated voltage: 400 V - Rated output: P2 7.50 kW - Thermal class: F - Degree of protection: IP55 - Power factor cosφ: 0.82 Dimensions: - Length: 1270 mm - Width: 550 mm - Height: 570 mm - Weight: 300 kg Properties of material 1.4593 Noridur: Excellent for use in: - Chemical and process industries - Sulphuric and phosphoric acid applications - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-laden wash suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 pieces horizontal, axially split volute casing pumps in process design, with radial impeller, single-entry, single-stage. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft sealing: Double-acting Burgmann mechanical seal with flush water connection and flow meter Kodpjfyn Rpefx Afuedn Impeller diameter: 169 mm Pump speed: 2,950 rpm !!! ATTENTION !!! Operating parameters listed on the nameplate. They do NOT indicate the actual duty point performance!!!! I have uploaded 2 characteristic curves as photos. Photo 11: Duty point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87% NPSH: 2.17 Operating data for last application (approx.): Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07% NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 5.5 kW Energy efficiency: IE2 Voltage: 400/690 Volt Speed: 2,950 rpm Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology ! Price per unit !

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water Kdjdsxp Eqkjpfx Afusn - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: as good as new (ex-display), Year of construction: 2025, Available now! Tank capacity: 192L External dimensions: 1330x945x1490mm Kdodpfx Aof A Eg Dofuen Usable grate dimensions: 680x435x330mm Loading weight: 80kg Ultrasonic frequency: 40kHz Ultrasonic power: 1200W Bag filter: YES Automatic filling: YES Pump-based emptying: YES Insulated lid: YES

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Automatic oil discharge Kdsdpfx Afsqy H H Djuon 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)