Used Cleaning Chemicals for sale (8,064)

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Cedpfx As Aa Agbei Rohd

Condition: good (used), functionality: fully functional, Year of construction: 2016, This is a professional, mobile cleaning device for injection molding machines and temperature control units. It can effectively flush out contaminated and scaled channels. Upon request, an operating manual for the system can be sent by email. Chsdoz Szn Nopfx Ai Rsd Features of the system: Two-container system made of stainless steel, 1 container for descaling and container 2 for neutralizing agent. Pulsating cleaning through air impulses. Process monitoring. Reduces cooling times in injection molding by up to 40%.

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Cedeziwwiopfx Ai Rshd Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos. Chedpeq H H Ruefx Ai Rod

Condition: excellent (used), Year of construction: 2018, Machine Data Machine Type: Cleaning machine with solvent and vacuum cycle Intended Use: Degreasing of metallic parts contaminated with oil and chips from mechanical machining Usable Solvents: Modified alcohol; Class AIII hydrocarbons (flash point > 60 °C) Load Capacity: 30 kg Chodpfxo Ahfito Ai Red Basket Dimensions: 371 × 221 × 200 mm (height 200 mm) Capacity (cycles per hour): 4–5 Filling Volume: 140 l Noise Level: < 70 dB(A) Control System: Siemens SIMATIC, operator panel SIMATIC HMI Solvent Tank: Empty, solvent not included in the scope of delivery Connection, Weight and Dimensions Dimensions: 1200 × 2000 × 1955 mm (height 1955 mm) Machine Weight: 700 kg Connected Load: 18 kW Mains Connection: 400 V / 50 Hz Auxiliary Voltage: 24 V DC / 24 V AC Equipment and Scope of Delivery Siemens operator panel SIMATIC HMI Accessory box with hoses, case, and small parts as shown in the photo Related accessories as shown in the photos Accessory box and accessories as shown in the photos. Solvent not included in the scope of delivery. Technical specifications are subject to change without notice. Errors and prior sale excepted. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall be binding.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Chjdjwz Nmpspfx Ai Rsd Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, FIXALINE FIXER C pipe cleaning machine, electromechanical cleaning used, from business liquidation Application range: Chodpfx Asz Ia S Dji Red 10mm shaft: DN 50–200 12mm shaft: DN 100–250 Technical data according to the manufacturer: Voltage: 220–240 V / 50–60 Hz / 16 A Speed: 2250 rpm Shaft length: 31 m Shaft diameter: 10 mm or 12 mm Dimensions: 122 × 45 × 90 cm Weight: With 10mm shaft: 74.5 kg With 12mm shaft: 78 kg Without shaft: 56.8 kg Features according to the manufacturer: Left/right rotation switch Speed control Foot switch Emergency stop switch Safety coupling including accessories, as shown in the picture. We recommend an inspection. Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, data, and technical specifications provided by the manufacturer. To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors, and printing errors.

Condition: good (used), Year of construction: 2020, Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: ZN, Stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD Cjdpfszn H Alsx Ai Rshd -Operating frequency: 25 kHz -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Chjdpfsz Iynfjx Ai Rsd Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 00038-13, For sale is a professional parts cleaning system from the renowned manufacturer Krumm-tec, model RK 30. The cabin enables safe, clean, and ergonomic work during component cleaning and workpiece post-processing. Areas of application & uses: Additive manufacturing (3D printing): Efficient removal of resin and powder residues as well as support structures (SLA, SLS, Polyjet). Conventional mechanical engineering: Degreasing, cleaning, and dust removal of metal and plastic components. Suitable for the use of cleaning media such as water, cleaners, or solvents (e.g., IPA), depending on the model. Features & advantages: Closed, ergonomic housing with a large viewing window and integrated work gloves. Workpiece support made of robust grating. Cjdpjz H H T Ssfx Ai Rohd Integrated lighting and extraction/filtration system for safe operation inside the cabin. Clean media separation and easy maintenance. Technical data: Manufacturer: Krumm-tec Model: RK 30 Working area (W x D x H): approx. 680 x 350 x 598 mm Max. load capacity: approx. 40 kg Design: Compact table/cabin system

Year of construction: 2014, condition: used, functionality: fully functional, For sale is a 2-bay cleaning system for KLT small load carriers. The Röhnrad cleaning process ensures that the KLTs are repeatedly filled and emptied with the cleaning medium, which guarantees excellent cleaning and drying results. In addition, the cleaning system features a recirculating air drying system with 18 kW. Chodpfx Aioz Aizgs Rod The insertion shelves can be adjusted in height to accommodate different KLT sizes. Equipment: - Automatic level control for the cleaning and rinsing tanks - Dosing pump - Steam extraction system - Recirculating air drying system 18 kW - Cleaning access cover - Three-phase separator oil separator - Fine filter Eaton for cleaning and rinsing tanks - Visual system status indicator (traffic light) - Feed trolley - Washing basket and adjustable grid - Insertion shelf Further details can be found in the attached data sheet.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner Csdpjz Ai Tpefx Ai Rohd - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2011, input voltage: 400 V, pressure: 7 bar, total width: 4,600 mm, total length: 6,700 mm, type of input current: three-phase, space requirement height: 2,050 mm, space requirement length: 6,700 mm, space requirement width: 4,600 mm, No. 3289 Corner cleaning machine Rotox EPA 479 + WTS 427 Used, year of construction 2011 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site CNC corner cleaning machine for welded PVC window frames and sashes Turning table WTS 427 for automatic infeed, outfeed and turning of the frames Automatic processing of all 4 frame corners Mobile control console with Windows-based PC visualisation Working range Outer frame size min. 350 x 350 mm, max. 3000 x 3000 mm Clear inner dimension min. 190 x 190 mm Profile width 40 - 140 mm, profile height 40 - 180 mm Pneumatic workpiece clamping Machining units Knife unit for visible surfaces, top and bottom Vertical CNC milling unit for the gasket groove Knife units for inner corners, vertical with draw knife Radius unit and inner corner bevel Outer corner milling unit with contour milling disc, tool Ø 170/200 mm, 5500 rpm Horizontal milling unit Outer corner plunge knife unit Codpfo Ah I Dkjx Ai Rohd Tooling as per tool list with contour milling disc Ø 190 mm, carbide milling cutters as well as visible surface knives, draw knives and plunge knives Programs and tools set up for the profile system previously used Connected loads Power supply 3/N/PE 400 V, 50 Hz Current consumption 21 A, upstream fuse 3 x 32 A slow-blow Operating pressure 6 - 7 bar Air consumption approx. 430 l/frame CE marking Installation dimensions approx. 6700 x 4600 x 2050 mm LWH Machine without turning table approx. 2000 x 1800 x 2050 mm LWH Weight approx. 2400 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 1,381 mm, total length: 3,170 mm, total height: 2,056 mm, maximum load weight: 40 kg, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, 2-chamber ultrasonic cleaning system with a goods lift and manual transfer unit to move items from chamber 1 (cleaning) to chamber 2 (rinsing). Oscillation/movement of goods is performed via the goods lift. Basket: 600x400x400h mm - Loading can be done directly at the goods lift from the front. Both chambers are equipped with ultrasonic transducers (at the bottom); frequency: 40 kHz, power: 1200 watts (peak 2,400 watts). Chamber internal dimensions: 750x450x520h mm, volume: approx. 120 liters; chamber material: stainless steel 1.4571. Both chambers are equipped with an oil separator (manufacturer: Belki) and a candle filter (9 3/4" - fineness 100 or 50 microns, selectable). Chjdpfjzgwqwjx Ai Red Heating in both chambers: 2 kW each. Connection power: 12 kW - supplied ready for connection with a 32-ampere plug.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working efficiency - 2000 m2/h Cedpoz D Adnofx Ai Rohd Brush motor - 550W Clean water tank - 60 l Machine weight - 180 kg Battery capacity - 24V/100Ah Cleaning width - 850 mm Vacuum motor - 500W Sewage tank - 55 l Machine dimensions - 140 x 85 x 105 cm

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg Cjdsz Nydkspfx Ai Rehd

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and Chodpfxe Ahmulj Ai Red aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Chsdpfozvlm Eex Ai Rod Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, heating capacity: 3 kW (4.08 HP), overall weight: 300 kg, input voltage: 380 V, year of last overhaul: 2026, Two-stage machine: the first stage uses ultrasonic cleaning, and the second stage is for rinsing without using the ultrasonic function. Codpfx Aozt Riaji Rohd

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, working width: 1,500 mm, RUBERG RVS 150 MULTI Sieve – Factory Reconditioned, Unused, Immediately Available For sale is a RUBERG RVS 150 MULTI sieve from Gebr. Ruberg GmbH & Co. KG, in factory-reconditioned condition. The machine has been completely overhauled by Ruberg, fitted with a new nameplate, and classified as “like new.” Since the overhaul, the unit has not been operated and has been stored in a dry location. Technical data: Type RUBERG RVS 150 MULTI Sieve width 1,500 mm Total sieve area 36 m² Pre-sieve area 6 m² Grain sieve area 15 m² Sand sieve area 15 m² Design: MULTI design with multi-fraction sieving and recirculating air aspiration Performance data: Wheat/Rye up to 150 t/h Barley up to 130 t/h Rapeseed up to 120 t/h Equipment: Recirculating air aspiration Multi-fraction sieving Roller sieves Grain sieves Sand sieves Pneumatic flap control Product sluice Dust separator Fan Additional interchangeable sieves Multi-product operation through flap switching Condition: Factory reconditioned by Ruberg New nameplate Not operated since reconditioning Dry storage in a hall Immediately available Suitable for: Grain cleaning Oilseed processing Rapeseed Seed processing Warehouses and silo operations Mills and processing plants Location: Germany Inspection possible by arrangement. Price: Negotiable Documentation for the reconditioning as well as technical documents are available. Chsdpfx Ao Ahxziei Rjd If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Chjdpfxow I Ddhj Ai Red Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Cedpfxsxp Eqko Ai Rshd Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. Chedpfx Aeywua Toi Rsd The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Chsdpsy H Uzvofx Ai Rjd Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with transport trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Csdjxvxqdjpfx Ai Rehd Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!