Used Climate Cabinet for sale (8,293)

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Ibodpfxsziywrj Aiyob Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system Ibodpezizmbefx Aiysb - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm Iodpfx Asziiztsiyebb External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone.

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Ijdpfjzizhfsx Aiyobb Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Ibsdpfozizk Hjx Aiyob Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Iodpfxezd Sdgo Aiyobb Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: used, mileage: 6,96,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons Isdpfjwnz Dtsx Aiyobb • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (Total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys each) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Chamber 1 (Year 1990): Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 2 (Year 1993): Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 3 (Year 1993): Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators The Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three robust steam and smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys each), which ensures optimal air and smoke circulation, and therefore a perfectly even distribution of temperature and color at each trolley level. Isdpfsy Ua Rxex Aiyobb Key advantages: - High-performance steam heating: The use of a steam system operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, reducing the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, mileage: 1,47,717 km, power: 100 kW (135.96 HP), first registration: 04/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Configuration as a bus (group transport vehicle) MR / high roof with full climate control and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrical, wear-free eddy current brake for adjusting the speed. Before sale, the windshield will be replaced with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Furthermore, before sale, the bases and deflector shields of the former roof-mounted rotating lights will be removed from the roof. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, before sale, we will dismantle the rear wooden cabinets. This also creates space for a motorhome interior. Technically, this Vario is in good condition and does not require any immediate repairs; it has been consistently maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle registration document: 120 km/h A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - Isdpfszr Ayhjx Aiyebb with adjustable backrests and armrests, and the left inner seats can also be moved approximately 10 cm forward on the console to provide more room for movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH) For an additional charge of €750, we can carry out a technical modification to convert the vehicle into a motorhome by removing some seats. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale are reserved.

Condition: used, mileage: 1,33,344 km, power: 100 kW (135.96 HP), first registration: 01/2004, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency / Federal Police. Configured as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for speed adjustment. The windshield will be replaced with real glass before sale. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear part of the vehicle can remain. Furthermore, before the sale, the bases and deflectors of the former roof-mounted rotating lights will be removed. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, for the sale, we will remove the rear wooden cabinets. This also creates space for a camper van conversion. Technically, this Vario is in good condition and does not require any immediate repairs – it has been regularly serviced according to the service schedule. All components, such as the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heater are functioning and very effective: Isdpfx Aezthrlsiyobb 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convector vents in the passenger compartment for draft-free heating. Maximum speed Vmax according to the vehicle registration document: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – with adjustable backrests and armrests, and the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional charge of €750, we can perform a technical modification to convert it into a camper van, which would involve removing some seats. Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2007, WP Rollprofi compact slit roll baking system with integrated Multimatic c 5-row drum moulder for the production of: slit rolls, smooth round products, long-rolled rolls, double rolls. year of build 2007 variable hourly output, depending on the number of rows and shape of the products 4.680 pcs/h Pre-proofing time min. 12 min: 6 min. upstream of the long rolling station 6 minutes between long roller and cutting station weight range of 24 g to 85 g (depending on the number of rows and shape of the products) Manual pressure adjustment Automatic weight adjustment Adjustable moulding belt Interchangeable molding drum 1 chamber drum of your choice included Pneumatically driven cutting station Exhaust air ventilator for correction of the proofing cabinet climate Hanger drying Cutting machine adjustable in height for the production of longitudinal cuts Long roller with height adjustment for pressure boards or top belt Variable depositing unit for proofing boards Ibedpfx Aijrzyc Ieyob in 3 Euro sizes: 400 x 600/580 x 780/580 x 980 Siemens S7 touch screen control climate control pictures BEFORE reconditioning/cleaning

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Ibsdjzia Idepfx Aiyjb Noise ≤65dB

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Iodpfx Aiozil R Rjysbb Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details. • Machine Type: CNC Gantry Milling (Double Flat / Twin Table Station) • Enclosure: Complete sound-insulated safety enclosure with sliding viewing doors • Control Unit: Swivel-mounted CNC control console with monitor, keyboard, touchpad, status indicator lights, and key switch Ibsdpozu Rtuofx Aiysb • Operator Controls: Standalone two-hand safety control pedestal equipped with palm switches and emergency stop button • Extraction System: Top-mounted multi-port suction hoods with 4 flexible extraction hoses • Cooling & Climate Control: Cabinet-mounted enclosure air conditioning/cooling units • Pneumatic System: Integrated pneumatic pressure regulators, air filtration assembly, manifold block, and coiled hose connection • Safety Equipment: Red/Green signal tower light mounted on the frame

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle Iedpfx Aszzxzmeiyjbb * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Ibodpfx Ajzx S E Tsiyjb Note: Induction unit is not included in the scope of supply.

Year of construction: 2019, operating hours: 599 h, condition: excellent (used), functionality: fully functional, Auer ST-1000 DPS semi-automatic blasting cabinet – 4 nozzles For sale: Auer ST-1000 DPS semi-automatic blasting cabinet, equipped with 4 blasting nozzles. Professional industrial blasting cabinet from Auer for efficient and uniform blasting of parts. Thanks to its semi-automatic design and four nozzles, the machine is ideal for processing products in series where a consistent and reproducible blasting result is required. The machine has been used in our production process and is offered for sale due to the cessation of our business operations. Machine specifications: Brand: Auer Type: ST-1000 DPS Semi-automatic blasting cabinet Equipped with 4 blasting nozzles Suitable for series production Uniform and reproducible surface treatment Year of construction: 2019 Ibodpez A Ad Sjfx Aiyjb Operating hours: 599 Includes: extraction system / filter system / rotary table / accessories etc. Suitable for cleaning, matting, roughening, and preparing surfaces for further treatment or coating. The blasting cabinet is currently still in place and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, table load: 4,000 kg, spindle speed (max.): 1,800 rpm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis SHW PowerSpeed 4000 CNC horizontal machining center was manufactured in 2022. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 750 mm. The machine includes a rotary table with a diameter of 1,400 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the SHW PowerSpeed 4000 machine we have for sale. Contact us for further details. • Bosch Servodyn servo drives; individual AC drives on X/Y/Z • Status / Condition: Machine connected and operational; very good technical condition; regularly maintained; available for inspection under power • Documentation: Complete technical, electrical, programming, transport and maintenance manuals; large documentation package included • W (quill) 115 mm • Rotary table: RT 5D, Ø 1,400 mm; controlled axes X, Y, Z, W, B (table); 7 T-slots + center slot; T-slot 22 mm (DIN 650); spacing 160 mm; center bore Ø 100 H6; max speed 2.5 rpm; table weight ~2,800 kg • Spindle: 95 mm front bearing diameter; horizontal and vertical milling spindle capability • Feed rates: Infinitely variable; 2–8,000 mm/min; rapid 8,000 mm/min • Tool clamping force: Horizontal 16,000 N; Vertical 10,000 N • Machine configuration and features: Horizontal machining center with automatic indexing rotary table; full enclosure; automatic lubrication system; Bosch Servodyn drive package; Heidenhain CNC control; large electrical cabinet with climate-controlled cooling units • Main capacities (summary): W 115 mm; rotary table Ø 1,400 mm Additional equipment • Vertical milling head (attachment) • Tool holders (as visible in photos) • Tool trolley (as visible in photos) Ibjdpfxszgd I Ao Aiyob Technical Specification Taper Size ISO 50

Condition: good (used), mileage: 89,553 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2019, Field of application: Freight transport Engine capacity: 1.950 cc GVW: 3.200 kg Technical condition: good Visual appearance: good Production country: DE Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2019 Condition: Used Data: First registration: 19.09.2019 Mileage: 89.553 KM Fuel type: Diesel Gear type: Automatic Drive type: Allrad Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Isdpfozxznwox Aiysbb Environment badge: Green / Euro 6 Colour: White color with foil coating Equipment: Daytime running lights, automatic climate control, seats: 3, airbag, electric windows and side mirrors, central locking, ABS, ESP, radio, power steering Information: According to DIN 75059: pressure chamber loudspeaker, Martin system, LED signaling system, accident data recorder, thermal compartment, cooling compartment, hands-free mobile phone system, cabinet in the rear area, doctor’s seat, work table Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 21197, overall weight: 2,100 kg, number of drawers: 100, power: 2 kW (2.72 HP), Gühring TM-136 Tool Storage System Year: 2006 Power supply: 230 V, 2 kW Isdpfx Aiez Arz Nsyjbb Empty weight: 2,100 kg Maximum total load: 6,000 kg Industrial tool dispensing and storage system with various drawer sizes. Used condition. More information and photos available on request.

Condition: excellent (used), We offer a climatic test chamber from Weiss with Feucht! The climatic test chamber was only serviced by Weiss / Vötsch in December 2020 and was still in use until December. 2021 the test sticker! All tests were carried out, another test run was carried out in our house, the humidity and temperature were checked with calibrated test equipment. The climatic test chamber has been serviced once a year and is in perfect condition! The logbook is attached WHITE 1500SB / 010JU / 40DU Temperature range -40 ° C - + 180 ° C Humidity / climate: 15%-95% / 10°C - 95°C Test space: 1500 liters Inner dimensions: 1490 mm deep, 1100 mm wide, 945 mm high Iodpfx Aeg Dcfzjiyebb External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2.00kg The cabinet has no feet and is stable on a frame If you have further questions, you can contact us at any time

Condition: good (used), mileage: 1,04,327 km, power: 140 kW (190.35 HP), fuel type: diesel, emission class: euro6, Year of construction: 2019, Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2019 Condition: Used Data: First registration: 09/2019 Fuel type: Diesel Mileage: 104.327 KM Gear type: Automatic Drive type: Four-wheel drive Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Environment badge: Green / Euro 6 Colour: White color with foil coating Isdpfxeygg I Te Aiyjbb Equipment: Daytime running lights, automatic climate control, seats: 3, airbag, electric windows and side mirrors, central locking, ABS, ESC, radio, power steering Information: According to DIN 75059: pressure chamber loudspeaker, Martin system, LED signaling system, accident data recorder, thermal compartment, refrigerated compartment, hands-free mobile phone system, rear compartment cabinet, doctor’s seat, work table. Location: 41468 Neuss immediately available

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use Ibodpfxexhfr Eo Aiyob A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. -Jig boring machine: including tool cabinet with various tools -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm -Quill stroke: 155 mm Ibjdpfxszrmf Io Aiysb -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Make: Mecatherm Model: BLOC HPII Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Ibjdpezx Er Hsfx Aiyob Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.