Used Climate Cabinet for sale (8,190)

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA Bedpfx Aj Agw Enedleww - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: good (used), mileage: 2,50,000 km, power: 368 kW (500.34 HP), first registration: 04/2024, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Equipment: AdBlue, air conditioning, retarder, YS2R4X20005742104 Bsdpfozq Dl Nox Adljww Scania R 500

Condition: used, mileage: 96,364 km, power: 130 kW (176.75 HP), first registration: 06/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, fuel tank capacity: 69 l, color: grey, gearing type: automatic, number of gears: 8, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, tire pressure monitoring, traction control, = Additional Options and Accessories = - Alarm system - Driver attention assist - Outside temperature gauge - Heated exterior mirrors - Passenger airbag - Third brake light - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - Collision mitigation by braking - Rear headrests - Leather steering wheel - Leather shift knob - Alloy wheels - Lumbar support - Rear center armrest - Front center armrest - Multifunctional steering wheel - Emergency brake assist - Rear parking sensors - Radio - Radio with DAB - Side airbags, front - Sliding door, right side - Immobilizer - Partition = Further Information = General Information Number of doors: 5 Model range: Oct. 2022 - Feb. 2024 Technical Information Bods Ahy Twepfx Adlsww Torque: 400 Nm Number of cylinders: 4 Engine displacement: 1,997 cc Unladen weight: 1,680 kg Acceleration (0-100): 10.9 s Top speed: 170 km/h Interior Upholstery: Leather Consumption Average fuel consumption: 7.4 l/100km Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: used, Lista drawer cabinet with milling tools Bsdpoq Aa I Tsfx Adljww Lista drawer cabinet Number of drawers: 13 Type of extension: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Color of cabinet: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Disc milling cutters, cross-toothed and coupled Disc milling cutters, cross-toothed Angle, semi-circular milling cutters Dovetail milling cutters Semi-circular milling cutters Thread milling cutters More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Workshop Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG Bwodpfx Asz I Dfuedlew

Condition: good (used), 5 packing tables, 2 of them with cabinets – used: Price for all 5 units ex works: €2,000 (net) including loading! Bwodpfxo Ahxvhe Adljw Manufacturer: unknown, possibly ROCHOLZ Type: unknown Year of manufacture: unknown Height-adjustable, with cardboard box magazine Condition: good Available: immediately Location: Frankenberg/Saxony warehouse

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Bodpfjz A Ry Iox Adloww Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: new, 6 St. range L-W-H 720 x 580 x 800 mm weight 100 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. Bjdovblibjpfx Adlsww 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Year of construction: 2024, condition: good (used), The energy storage system was purchased in 2024 and is being sold due to business closure. Bwodpfxs Ab Arys Adlsw The energy storage system consists of: 6 batteries, maximum storage capacity of 200 kWh, maximum output power of 75 kW (3 x 25 kW), maximum input power of 75 kW (3 x 25 kW). The system is permanently installed in a 10-foot container. An inspection can be arranged by appointment. Important: The storage container was professionally dismantled by the previous operator and is now stored at our facility.

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors - 2 hinged viewing windows: 400 x 250 mm - 2 blasting guns - 2 electric foot switches Bwjdjz Dt I Dopfx Adlow - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg

Condition: new, Year of construction: 2019, functionality: fully functional, HAUSER MIRENGO RMG 1875 Freezer Cabinet Manufacturer: HAUSER Model: MIRENGO RMG 1875 Plug-in ready Year of construction: 2019 Specifications: Total length: 206 cm Depth: 100 cm Height: 243.6 cm LED lighting Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. Bwsdpfx Ao Ad Uxdedlsw sat .: closed

Year of construction: 2026, condition: like new (used), BINDER KBF 470 – climate chamber – 2026 – like new condition For sale: a professional BINDER KBF 470 climate chamber, manufactured in 2026. The unit is in excellent, virtually factory-new condition. Protective elements from the transport are still attached to the housing and control panel. Bwedsz Dufdspfx Adlsw Device specifications: * Manufacturer: BINDER GmbH, Germany * Model: KBF 470 * Year of manufacture: 2026 * Chamber capacity: approx. 470 l * Maximum temperature: 100°C * Power supply: 220–240 V / 50–60 Hz * Power: 1.40 kW * Max. working pressure of the system: 11 bar * Refrigerant: R600a * Control: modern, touch-screen BINDER controller * Condition: like new / virtually unused The KBF 470 model is designed for precise research under controlled temperature and humidity conditions. It is suitable for use in laboratories, quality control, the pharmaceutical, cosmetic, and food industries, as well as for product stability tests. The greatest advantage of the offered unit is its year of manufacture (2026) and condition, which is close to that of a brand-new device.

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) Bsdjrbzygspfx Adloww AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications Bwedpfx Adez Snbweljw The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: used, mileage: 78,187 km, power: 115 kW (156.36 HP), first registration: 01/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 3, total length: 7,650 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, power assisted steering, power mirror, traction control, = Additional Options and Accessories = - Third brake light - Remote-controlled central locking - Height-adjustable steering wheel - Air conditioning - Leather steering wheel - Leather gear knob - Multifunctional steering wheel - Rearview camera - Immobilizer - Telephone with Bluetooth = Further Information = General Information Number of doors: 2 Model range: Jan. 2020 - Dec. 2023 Technical Information Torque: 350 Nm Number of cylinders: 4 Bwodpfx Ao Ahy H Rjdlow Engine displacement: 2,287 cc Weights Unladen weight: 2,590 kg Payload: 910 kg GVW: 3,500 kg Maintenance APK (Technical Inspection): valid until 01/2027 Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: like new (used), Year of construction: 2023, overall weight: 100 kg, total length: 1,200 mm, total height: 1,800 mm, total width: 600 mm, Control cabinet, switchgear panel, expansion control cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX 8286.000 Two-door cabinet Bedpfxozfhgge Adleww Cabinet dimensions: 1200 x 600 x H-1800 Weight: 100 kg Cabinet is like new / never used.

Condition: used, Robust measuring tool cabinet with 5 pull-out drawers. Bwedpfxez Hmrhe Adlew Drawer 1: Caliper with gear tooth measurement, 50-75 mm Caliper, 5x, 0-25 mm Caliper, 2x, 25-50 mm Drawer 2: Caliper, 2x, 50-75 mm Caliper, 1x, 100-175 mm Caliper, 1x, 225-250 mm Drawer 3: Caliper, 6x, larger than 75 mm Caliper, 4x, with dial indicator Caliper, 1x, 225-250 mm Drawer 4: Calipers, 7x, up to 75 mm Drawer 5: Calipers, 5x, 0-150 mm Calipers, 2x, 0-300 mm 1x Measuring tool cabinet, 50x50 cm, height 90 cm

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. Bsdpfxexr Awae Adleww 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Condition: used, Orange juicer with automatic fruit feed This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh juice in kitchens, hotels, canteens or small-scale production. Bodsz Ndcvspfx Adleww The juicer sits on a stainless steel base cabinet on castors. We have not been able to confirm the exact model or the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic citrus juicer Feed: Fruit basket on top Controls: Display with on/stop/select buttons Construction: On stainless steel cabinet with castors and peel bins

Condition: like new (used), Year of construction: 2024, overall weight: 140 kg, total length: 1,200 mm, total height: 2,000 mm, total width: 600 mm, Control cabinet, switchgear cabinet, expansion cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX Y352.222 Bodpfx Adozfhh Rsleww Rittal two-door cabinet with integrated lighting cabinet dimensions: 1200 x 600 x h-2000 weight - 140 kg Cabinet is like new / never used.

Condition: used, Feutron Temperature Test Chamber -40 to +100°C The Feutron TPK 3403/125, due to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sampling inspection: Tests carried out during series production to ensure that the production process meets the specified temperature ranges. Standard testing: Performing tests according to common industry standards (e.g., DIN EN 60068), which specify certain temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Bjdpoy Nynajfx Adleww Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, RS SIMULATORS Climate Testing Chamber / Temperature and Humidity Testing Chamber RS Simulators KKC 2/45 Temperature range: -30 °C to +130 °C For sale: a used climate testing chamber from the manufacturer RS Simulators Prüf- und Messtechnik GmbH. The system is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, as well as development and stress testing. The chamber features a programmable controller, temperature and humidity display, a viewing window, and a stainless steel test chamber. Technical data: Manufacturer: RS Simulators Type: KKC 2/45 Design: Compact climate chamber Temperature range according to workshop report: -30 °C to +130 °C Humidity function: available Air-cooled design Humidity testing at 30 °C / 40 % RH Humidity testing at 80 °C / 85 % RH Refrigerant: R449A Filling quantity: 2.0 kg GWP according to nameplate: 1,397 Mains connection according to nameplate: 3 × 400 V / N / PE Rated current: 20 A External dimensions according to previous description (W × D × H): approx. 1,390 × 2,550 × 2,390 mm Weight according to nameplate: 1,400 kg Equipment: Programmable controller SE-604 Temperature and humidity control Digital temperature and humidity display Program and curve display Data logger menu Test chamber made of stainless steel Test chamber door with viewing window Test chamber lighting Circulation fan Insert shelf and support rails Bjdpfez Uny Dex Adljww Emergency stop switch Water connections Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material and component testing Electronics and component testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1 × RS Simulators KKC 2/45 climate testing chamber Insert shelf and accessories according to images Shipping or freight forwarding possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Bwedpfozzli Rsx Adljw Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: used, Andreas Schmid Climate Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3 Bwedpfx Aeuuibkodlew Air conditioning unit Regulation and Control Climate program controller SE 502 The climate controller includes 4 control zones Program Generator 8 setpoints 32 control tracks 400 segments 25 programs 8 loops per program Temperature range: -40°C to +130°C Temperature stability: +-1.0 K over time Average temperature change rate from -40°C to +80°C: approx. 3K/min Cooling system: Refrigeration compressor, water-cooled Refrigerant: R23 / R 404 A Cooling water inlet temperature: 15 Ambient temperature: 35°C Heating system: electric resistance heating Electrical connection: 240/400 V, 3 PH, N, PE Power consumption Cooling mode: 24 A Heating mode: 18 A Dimensions: W x D x H 1600 x 800 x 2250 mm Chamber: W x D x H 670 x 640 x 750 mm Internal: TK16 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Bodjxhfpkopfx Adlsww Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.