Used Clutch for sale (1,147)

Condition: used, mileage: 10,11,264 km, power: 315 kW (428.28 HP), first registration: 04/2014, fuel type: diesel, number of seats: 62, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++ Engine overhauled at 585,000 km at Evobus Dortmund +++ +++ Clutch NEW at 850,000 km for €13,000 +++ Engine: Mercedes-Benz AdBlue Emission standard: Euro 6 Transmission: Automatic Seats: 59+1+2 sleeper seats with lap belts Safety / Retarder * Cruise control * Adaptive cruise control * ASR, ESP, EBS * Fog lights * Immobilizer * Xenon lights * Brake assist * Lane departure warning * Reversing camera * Multifunction steering wheel Passenger compartment / Auxiliary heater * Wood-effect flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Overhead air vents * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Sausage cooker Ksdpfxew R Ibco Adwowt * Coffee machine * Central WC * Leather headrests * Tour guide microphone * Driver’s microphone Exterior / Trailer coupling * Lifting/lowering system * Tachograph with card * Power steering * Sun visor * Sleeper cabin pre-installed * Electric exterior mirrors * Central locking * Roof hatches, fans, roof ventilators Audio & Communication / Navigation system * Power inverter * Radio / CD * Video / DVD Other Vehicle dimensions: Length: 14.03 m, width: 2.55 m, height: 3.75 m * German vehicle documents * Hubcaps * Twin tires * Tyre condition: front approx. 50%, middle approx. 60%, rear approx. 50% * Our internal vehicle number: 11381 Errors excepted. Images and text may differ from actual vehicle. Continuously over 300 more vehicles available in our inventory.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Kjdpfxox U Eiaj Adwewt Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), mileage: 15,92,353 km, power: 324 kW (440.52 HP), first registration: 10/2010, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 6,120 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional options and equipment = - 2nd diesel tank - Digital tachograph - Tachograph (recording device) - Fixed - Topline - Additional braking system = Remarks = Number of axles: 2, Configuration: 4x2, Total tank capacity: 1400 liters, 2nd diesel tank, Fifth wheel height: 109 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Topline, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: white, Heated mirrors, Lighting type: halogen, Climate control, Engine power: 324 kW (434 HP), Fuel: diesel, Euro: 5, Transmission type: Opti-cruise, Gearbox manufacturer: Scania, Gears: 12, Clutch pedal, Additional braking system, Retarder make: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual = Further information = Transmission Transmission: SCA, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Axle 1: Steered; left tire tread: 6 mm; right tire tread: 4 mm; Suspension: leaf spring Axle 2: Twin tires; left inner tread: 5 mm; left outer tread: 4 mm; right inner tread: 5 mm; right outer tread: 5 mm; Suspension: air suspension Kedpsyaxzlofx Adwowt Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, quickly changing stock • Recognizable quality • Competitive prices • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Professional technical services • Assurance of "recognizable quality" • And more… Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send a request via our website. Ask directly about our European warranty packages.

Condition: excellent (used), Portable motor pump in very good technical and visual condition. Fully complete, undamaged, ready for work or for a collection. Original Volkswagenwerk AG West Germany engine, type 122, displacement 1192 cm³, power 25 kW (34 HP) at 3600 rpm. Pump manufacturer: Gebr. Bachert, 7107 Bad Friedrichshall Model: FP 8/8 Capacity: 800 l/min at 8 bar Year of manufacture: 1984 Engine runtime: 55 engine hours • Very good condition, engine starts and runs smoothly. • Complete VDO gauges, manometers, oil pressure indicator, tachometer. • Clutch drive with control lever. • Original quick couplings and discharge elements. • Red housing, original paintwork preserved with Bachert logo. • Ideal for demonstration, museum display, or as a reserve fire brigade unit. Ksdpsxmtzxsfx Adwjwt

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm Kwodpsw U Ekpjfx Adwet ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm Kjdpjvuukusfx Adwswt feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: new, The Sinus 330/2000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior precision. Built on a solid, one-piece cast bed, this machine ensures remarkable rigidity and stability even under heavy workloads. It features a manual multi-disc clutch for smooth operation and can handle large workpieces, with a turning diameter over the bed of 660 mm and a maximum workpiece length of 2,000 mm. Highlighted by its hardened guideways, the Sinus 330/2000 D operates quietly while providing high cutting power, making it ideal for machining large parts and flanges. Additionally, it includes a removable bed bridge for versatility, automatic lubrication for optimal performance, and a tapered turning device for enhanced functionality. With standard equipment that encompasses a three-axis position indicator, efficient coolant system, and rapid feed capabilities on both Z and X axes, this lathe stands out in both functionality and user safety. You can request a quote to explore how the Sinus 330/2000 D can meet your machining needs within the Engine Lathes product group. Kwodpeu E Nhgefx Adwet

Condition: new, The Sinus 330/3000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior performance. Built on a solid one-piece cast machine bed, this lathe excels in heavy-duty tasks with a maximum turning diameter of 660 mm and a workpiece length capacity of up to 3,000 mm. Precise operation is ensured with hardened guideways and a manual multi-disc clutch for smooth spindle engagement, making it ideal for machining large parts and flanges. The integrated removable bed bridge expands functionality, while rapid traverse on two axes facilitates quick positioning for increased efficiency. Safety is prioritized with features like overload protection and a well-designed splash guard. As with all KNUTH machines, the Sinus 330/3000 D is engineered for reliability and longevity. For further details or to buy now, explore our offerings in Conventional Horizontal Lathes and Engine Lathes. Kjdpfouyh Nrsx Adwjwt

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m Kedpfevuuknox Adwswt weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 Kjdpfx Adew U Ekvswjwt material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm Kwjdjwc U Nljpfx Adwot with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm Ksdpfxovzxtts Adwswt dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm Kodsvuk S Uopfx Adwswt column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation Kjdpfevuk Snsx Adwowt as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: used, Year of construction: 1969, pressure 050 t throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm ram adjustment 70 mm power requirement 2,2 kW Kwedpjvzxr Nsfx Adwst weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm Kwjdpfxjvuk Rwo Adwjt power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t Kodjvuk Rkjpfx Adwowt dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 - installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse / Safety adaptations / mechanical overhaul / new electrical control can be offered additionally on request

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Kwodpfx Adjvuuk Ijwst Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: used, Year of construction: 1985, Pressure 080 t throat 345 mm stroke 20 - 160 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 495 mm table surface area 920 x 610 mm table height over floor 800 mm Hole in the table 280 mm passage to the back 670 mm ram surface 650 x 400 mm ram adjustment 50 mm power capacity 10,0 kW weight 7,7 t Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m permitted for manual put-in according to the German Safety Regulations (UVV) Ksdpfxevuug Nj Adwewt with motor, pneumatic clutch, hydraulic overload protection in ram, manual stroke adjustment, motoric ram adjustment, motoric centralized lubrication, two-hand operation Press is at the moment being overhauled electrically and mechanically - video is from before starting the overhaul WITH mechanical partly overhaul, WITH new electrical control Pilz

Condition: used, Year of construction: 1990, pressure 100 t throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm Kodpfxovuug Aj Adwjwt table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm power requirement 5,5 kW weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1990, pressure 32 t Kjdpfovuuf Ssx Adwjwt distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm Kjdpfx Aovuudnjdwjwt table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t Kodpfx Adsvuuc Rjwjwt dimensions (WxDxH) 1,3 x 1,7 x 2,35 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual centralized lubrication, two-hand operation

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm Kwsdevuk H Eepfx Adwjt ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm Kwedpfsvuucwjx Adwet power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F