Used Clutch for sale (995)

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm Iedpfx Aovuuaiebceap power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1993, pressure 63 t Iaodsvut Ixspfx Abcep stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Iaedpfx Abevut Hhjcsp Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation as is where is, WITHOUT any additional work, free loaded to truck

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m Isdpevut Ewsfx Abcsap only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Iasdpfxjflt Egs Abcop Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Iasdpfeflt Edex Abcjp Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock Iodpfxoi Db Ibo Abcjap - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate Iaododzqmzepfx Abcep - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission Isdpfx Abodzqltoceap - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Iaedpfx Abju Rwa Iscsp Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles Isdpfx Aoi A A Tbjbcjap - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Iaedpfx Aetx E Rqebcjp Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine space requirement L x W x H 900 x 600 x 1700 mm Iaedpfx Ajik Srwebcsp weight 530 kg very good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Ijdpfx Abjv Uraajceap Weight 3 tons Good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Iedpfjflt Ebjx Abceap Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Iajdpfjfim Thex Abcsp Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear Iodpfxolb I Dze Abcjap - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm Iasdeffm Hhepfx Abcep weight approx. 2,6 ton.

Condition: new, mileage: 100 km, power: 353.04 kW (480.00 HP), fuel type: diesel, maximum load weight: 41,000 kg, axle configuration: 8x8, wheelbase: 4,850 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space height: 1,450 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, blind spot assist, central locking, electric window regulation, fog lights, full service history, non-smoking vehicle, onboard computer, power assisted steering, seat heater, start-stop system, tachograph, traction control, WE PRESENT: Mercedes-Benz Arocs 4148 AK 8x8 Automatic – with KH tipper body – a proven construction classic! Color: red • Year of manufacture: 2025 and subsequent models from 2026 onwards (!) • Wheelbase: 4850 mm • Power: 480 HP • OM 471 engine, inline 6-cylinder, 12.8 l • G330 12-speed automatic transmission • M-cab with comfortable steel suspension • Comfort driver’s seat, heated • Offroad Protection Package (additional reinforcements, handrails on the roof and behind the cab) • 2 warning horns • Dual clutch discs • Reinforced weight specification: 42t • Springs front: 8.0t, 3-leaf; rear: 16.0t, 4-leaf • 13R off-road tires • Spare wheel included! • KH tipper body, rear tipper W1U, 6200 mm length x 1450 mm side walls, 18.5 m³ volume, Hardox 450 steel, HYVA hydraulics, 24-month warranty Ijdpfeyrmrisx Abcoap Approximate price list for additional IMMEDIATELY available KH rear tipper variants: Arocs 3348 6x6 manual transmission, year 2024 – EUR 143,000 net price AVAILABLE: 8x8 and 8x6 with MEILLER rear tipper/Hydroboard bodies, 2025 models! FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany ONLINE SALES wir sprechen deutsch we speak English говорим по-русски mówimy po polsku

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 8,550 kg, wheelbase: 4,750 mm, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, start-stop system, tachograph, traction control, We can manufacture a wide range of body types – crane, flatbed, tipper, and hook-lift. Vehicle Type: 9C18 AMT Vehicle Category: Chassis Engine Power: 129 kW (175 HP) Wheelbase: 4750 mm Gross Vehicle Weight: 8,550 kg Electronic Stability Program (ESP) Disc brakes front and rear with electronic wear indicator Front axle stabilizer Rear axle stabilizer Chassis with reinforced ladder-type frame Height- and tilt-adjustable steering column mount Multifunction steering wheel Reinforced vehicle battery, 2x100Ah (2 batteries) Base vehicle operating voltage: 12V Heated rear view mirrors Sun visors for driver and passenger (in cab) Power windows for driver and passenger doors Comfort single cab Tiltable cab Iedpfx Abeyrmnkjcoap Cupholder Overhead storage compartment above windshield, 1 section Entry assist handle, driver and passenger side Central locking system with smart key Immobilizer with transponder DUONIC© dual-clutch transmission Reverse warning system Seat belt warning device LCD combination instrument unit Front Protection Assist Intelligent Speed Assist Driver Attention Assist Blind Spot Assist Main fuel tank: 100 liters Plastic fuel tank LED fog lights Marker lights (ECE R7 compliant) LED daytime running lights Automatic lighting with light sensor Side indicators High beam assist (Intelligent Headlight Control) Halogen headlamps 12V, front Speed limiter 90 km/h, EU compliant Engine with start/stop system Engine: R4, 129 kW (175 HP), 2865 rpm OM5 engine version, Euro VI OBD Step E, Canter OT0 Mastercode Scattolini OT6 double battery cover OV2 pre-installation for battery relay 12V Hill Start Assist Advanced Emergency Braking System (AEBS) Lane Departure Warning System (LDWS) Digital tachograph 4.1a EU (2 drivers) Reversing camera Emergency braking lights Interface for breathalyzer Touchscreen DAB radio (6.95") Apple CarPlay, Android Vehicle Cyber Security Tire Pressure Monitoring System Active Brake Assist 6 Rear traction tires Valve extension for twin rear wheels Driver airbag SH6 driver comfort suspension seat with horizontal damping Driver seat armrest Double passenger seat Isringhausen seats, black fabric Axle ratio i = 5.714 (Canter) Vinyl flooring Speedometer (mph and km/h) ABS with electronic brake force distribution Short mirror bracket including wide-angle mirror Automatic climate control Cruise control Hand throttle engine speed controller ADDITIONAL INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your disposal: ONLINE SALES We speak German We speak English Мы говорим по-русски Mówimy po polsku

Condition: used, mileage: 1,00,000 km, power: 110 kW (149.56 HP), first registration: 07/2021, fuel type: diesel, next inspection (TÜV): 01/2028, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, traction control, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we kindly request that you arrange an appointment by phone for a consultation or test drive. * Non-smoker TRANSMISSION / CHASSIS * Engine: 2.0 L – 110 kW TDI * Transmission: 7-speed Dual-Clutch Gearbox (DSG) * Body variant: Standard roof * Transporter EXTERIOR * ‘Transporter’ lettering on the fender * Candy White LIGHTING & VISIBILITY * LED main headlights with LED daytime running lights * Fog lights with integrated cornering function * Light & Sight package * Interior mirror with automatic dimming * LED interior lighting in load/passenger compartment * LED rear lights, red * Heated windshield washer nozzles and washer fluid level indicator * Exterior mirror convex, left * Exterior mirror convex, right * Headlights and rear lights LED ENTERTAINMENT * Digital radio reception (DAB+) * Voice control * Mobile phone interface * Voice command system * Discover Media audio navigation system with streaming & internet (touchscreen, USB) * Mobile online services App-Connect Wired and Wireless * Multimedia interface: 2 x USB (Type C) in front * 4 speakers: 2 tweeters, 2 woofers * Emergency call system * ECE region code for radio * Prepared for We Connect and We Connect Plus ASSISTANCE SYSTEMS & SAFETY Isdpfxox Txhte Abcsap * Cruise control system (cruise control) incl. speed limiter * Driver assistance system: Brake Assist (HBA) * Driver assistance system: Multi-collision brake * Tire pressure monitoring display * Start/stop system * Driver assistance system: Hill Start Assist * Driver assistance system: Rear parking assist * Driver fatigue detection * Exterior mirrors electrically adjustable and heated * Electronic immobilizer * Multifunction display Plus * Driver assistance system: Crosswind Assist * Passenger airbag deactivatable * Driver and passenger airbags * Warning buzzer and indicator for unfastened driver seatbelt COMFORT * Auxiliary heater (hot water) with stationary heating function * Rearview camera * Steering column (steering wheel) adjustable * Climatic air conditioning (cab) * Rain sensor * Seats in cab: driver’s seat heated * Leather multifunction steering wheel * Seats in cab: driver’s seat height adjustable * Seats in cab: armrests, driver’s seat * Lockable glove compartment * Thermal insulation glazing * 12V power outlets in cab (2 units) * Enhanced interior noise insulation MISCELLANEOUS * Window in load/passenger compartment: fixed front right, rear without window * Window in load/passenger compartment: fixed front left, rear without window * High partition wall in load area with fixed window * Fuel tank: 70 liters * Load/passenger compartment lining: half-height hardboard * Truck registration * Laminated glass windscreen * Cab flooring: rubber * Standard hinges for rear doors/tailgate * Second battery * Wheelbase: 3000 mm * Vehicle documentation in German * Heated windscreen * Sliding door load/passenger compartment right * Permissible gross weight 3.20 t (incl. reinforced 16" steel rims) * Diesel particulate filter * Seats in cab: lumbar support for driver’s seat * Sliding door load/passenger compartment left * and much more * The above information is provided without guarantee. It does not represent an agreed quality specification. Subject to errors and prior sale. * Our services: * Financing possible without down payment

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity 1000 x 3.5 mm - electric foot switch - side stop left 600 mm, two supports each 600 mm - central lubrication - Ortlinghaus brake-clutch combination Iaedjyr Sg Ejpfx Abcsp - pneumatic tilting roller table or lifting with plastic rollers - rear stop area protected by light barrier - operating instructions

Condition: used, mileage: 2,55,100 km, power: 88 kW (119.65 HP), first registration: 12/2016, fuel type: diesel, maximum load weight: 820 kg, overall weight: 2,300 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,100 mm, Year of construction: 2016, - Used Van: Ford Connect Van L2 long wheelbase, Trend trim. - Year: 2016, Engine: 1.5 TDCi 120hp Euro 6, Mileage: 255,100 km. - 3-seat van, long wheelbase. Load compartment length: 2,100 mm, featuring a folding bulkhead and collapsible passenger seat for transporting long items. Load area with marine plywood floor lining and 2 additional security locks for the cargo compartment. - Trend package, equipped with: Air conditioning, Radio-Bluetooth with USB, Rear parking sensors, Fog lights, On-board computer, Central locking, Two keys, Spare wheel, Driver airbag, ABS, ESP, TCS. - Bodywork has dents on right and left rear wheel arches and some scratches. Interior in good condition. Mechanics: recently serviced, NEW CLUTCH. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:30 - Certified mileage. - Tailored financing available. Carlo Mauri Srl declines any responsibility for any involuntary discrepancies in this advertisement, which does not constitute any contractual commitment. Displayed prices exclude VAT and transfer of ownership costs. Ijdpfevv Eiqex Abcoap

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: TYPE 63 R4, overall weight: 4,600 kg, pressing force: 63 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), input voltage: 400 V, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Iaedpfx Aboyn Sdpscsp Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 Iaedpsyn Rhyefx Abcjp User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally