Used Cnc Arcade for sale (8,839)

Condition: new, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 10 Stück no. of strokes 14 - 24 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 850 mm oil volume 200 ltr. weight of the machine ca. 6.500 kg range L-W-H 2500 x 2250 x 1950 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" Bodpo Agphcjfx Airjdi - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Driven by recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet metal support device "MONOBLOCK" * For cutting thin sheet metal * Image shows a machine of similar design

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange Bedpo Af Uxxsfx Airjdi ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control system, Bodpszqbn Uofx Airedi 32 mm spindle bore, Turret with driven tools, Counter spindle, Tool magazine, High-pressure pump.

Condition: used, Year of construction: 2005, CNC Machining Center Manufacturer: IMA Bdjds Adyhwopfx Airji Type: BIMA 300 Year of manufacture: 2005 Technical data Work area - Machining area X-axis: 4,300 mm - Machining area Y-axis with main spindle and 20 mm tool: 1,400 mm - Machining area Y-axis with drilling unit (all vertical drilling spindles): 1,100 mm - Max. clamping height above the vacuum suction surface: 125 mm - Max. workpiece thickness: depends on equipment and application - Working height: approx. 950 mm - Two-zone work area without pendulum machining: 2 x 2,050 mm - Average clearance without pendulum machining: 200 mm - Two-zone work area with pendulum machining: 2 x 1,750 mm - Average clearance with pendulum machining: 800 mm Main spindle - Spindle power: 7.5 kW - Tool holder: HSK-F63 - Taper diameter: 38 mm - Automatic tool clamping - Clamping force: 11,000 N - Release force: 20,400 N - Max. tool weight: 6 kg - Spindle speed: continuously variable, 1,500 - 18,000 rpm - Direction of rotation: programmable, clockwise and counterclockwise - Drive: Three-phase motor with frequency converter - Spindle lubrication: permanently lubricated at the factory - Spindle cooling: air-cooled - Integrated CNC rotary axis for tool positioning over 360°, with torque support and pneumatic connection Axis speeds - Max. rapid traverse X-/Y-axes: 60 m/min - Max. rapid traverse Z-axis: 30 m/min Vacuum, extraction, and compressed air - Required compressed air pressure: 7 bar - Extraction port diameter: 250 mm - Required extraction air velocity: 28 m/s - Required extraction volume flow: 4,950 m³/h - Vacuum pump capacity: 90 m³/h Dimensions and weight - Machine length: approx. 5,750 mm - Machine width: approx. 3,830 mm - Machine weight: approx. 6,000 kg Accessories - 90-degree angle drilling unit - 3 x HSK tool holders Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Bdjdo Ad Izrjpfx Airsi Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: new, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 16 Stück no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 2.5 ° throat 150 mm table height 830 mm oil volume 250 ltr. weight of the machine ca. 11.000 kg range L-W-H 4150 x 2350 x 2450 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm Bdedpfxj Afzu Ie Airei * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical model

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen Bsdpfxs Afzvfo Airedi * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 500-600 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 8.000 kg range L-W-H 4150 x 2250 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment + cutting-angle adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel distance . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80.0 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard, with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - 1x mobile foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet support device for cutting thin metal sheets * Image shows a machine of a similar design Bdedpfx Aie Afzvrsroi

Condition: excellent (used), Year of construction: 2009, operating hours: 19,774 h, 1 used CNC turning and milling center, DMG-GILDEMEISTER CTX beta 1250 TC, with SIEMENS Sinumerik 840 D sI control. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Bedpfj Afan Tex Airsdi DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Max. turning diameter 160 mm Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Z-axis 350 mm Tailstock travel 350 mm Tailstock Bodpfs Afhifsx Airedi Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, FOR SALE CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (year 2010) available for sale: CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (2010) Specifications and technical capabilities: - Machining capabilities: Max. turning diameter: 356 mm | Max. turning length: 705 mm | Bar capacity: 80 mm - Main spindle: Max. speed: 4,000 rpm | Spindle nose: A2-8 | Motor power: 26 kW - Counter spindle: Max. speed: 6,000 rpm | Spindle nose: A2-5 | Motor power: 11 kW - Turret and Y-axis: 12-position turret (all motorized, max. tool speed: 6,000 rpm) | Y-axis travel: ±50 mm Machine history and condition: - Numerical control: FANUC CNC - Identification: Manufactured in Japan in November 2010 - Certified hours: Power-on time: 16,311 h | Actual cutting time: 15,534 h | Operating time: 3,110 h - Maintenance: Machine in good condition, well-maintained and regularly serviced Equipment and accessories included: - Chip evacuation: Rear chip conveyor Bdjdpfo Af A Amox Airoi - Clamping: Equipped with a collet chuck - Turret tooling: Supplied with 5 drilling chucks and 2 double-sided external chucks - Important note: Sold without a drawbar, without a tailstock, and without a chip extraction system. Logistics: - Footprint dimensions: approximately 4.3 m x 2.1 m | Weight: 6,200 kg - Required power supply: 200V AC / 3-phase / 44 kVA

Condition: excellent (used), Year of construction: 2009, operating hours: 18,493 h, functionality: fully functional, Base machine CTX alpha 500, driven tooling, G-axis, measuring probe in X-axis Control system: Siemens CNC control system SIEMENS 8400 ERGOLine Options Opposing spindle ISM as. C, Y-axis, instead of tailstock Coolant and chip disposal Coolant system 8/20 bar, 600 L, band filter Coolant spray gun Bedpfx Ao Ahi Ngjirodi Equipment for bar machining Package for bar machining CTX alpha 52 mm Main spindle reducing sleeve Short bar loader magazine, IRCO, ILSRBK 100/12 Clamping device for main spindle 3-jaw chuck, BBD 21066, manufacturer SMW Collet chuck KSZCC 60, manufacturer SMW Clamping device for opposing spindle Collet chuck KSZCC52, manufacturer SMW 3-jaw chuck, BBD 170-52, manufacturer SMW Documentation Documentation, delivery list, technical documentation DMG Powertools DMG Netservice - on board Special designs Swiveling scraper for chip conveyor, manufacturer Bürener, SP63/30225 Tool spindle, 90° angular geared double spindle head, 2 pieces, 105465 Drill bar holder, 6 pieces, 085822 Multiple holder, form 2, 1 piece, 114008 4-fold holder for Y-machine, 1 piece, 1530200Y Multiple holder, form D130x20, 4 pieces, 114013 Reducing sleeve, 8 mm, 2 pieces, 100244 Reducing sleeve, 10 mm, 2 pieces, 100245 Reducing sleeve, 12 mm, 2 pieces, 100246 Reducing sleeve, 20 mm, 3 pieces, 100248 Reducing sleeve, 25 mm, 2 pieces, 100249 90° adapter, left, 2 pieces, 0E5390 90° adapter, right, 2 pieces, 085407 Cylindrical shank holder, form E230X25, 1 piece, 113985 Tool holder with cylindrical shank, form E3/E430x25, 4 pieces, 113880 Actuating key for dovetail, nut ER25, 1 piece, 105762 Collet chuck holder d=32, ER25, 2 pieces, 107846

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA Bjdpjz Ebzhjfx Airedi AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bdsdpfxozvhkyo Airsi

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Bodpjx Twd Hofx Airedi Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: good (used), Year of construction: 2001, Machine is in good condition. Bjdpferpk Rmex Airjdi Parts shown by hand not come. Cutting tools not come.

Condition: good (used), Year of construction: 2000, Machine is in good working condition. Bodporh Ipaefx Airedi Magnet 600 mm

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm Bdodpfx Aeu Ibvuoirji bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws Bdjdpfx Aisu Ix I Ujroi -6 footrests *

Condition: used, Year of construction: 1987, Technical details: Bedou Ix N Sepfx Airsdi turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: ready for operation (used), BWO Lorenz CNC 785 control panel and display, 082205, serial number: 4935.001 P2, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bedpelcf Rbefx Airjdi

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Bdodeufp Svspfx Airji Parts shown by hand not come.

Condition: good (used), Year of construction: 2000, Punch press Bsdpfx Aeul S Eaeirsdi Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 191026

Condition: new, Year of construction: 2026, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Bdedpfx Aistrf Smjrei Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW Bdodsh Txlcspfx Airsi XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head