Used Cnc Center for sale (17,933)

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Iaedpsx Hgl Hefx Adwsl Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: used, Year of construction: 1986, functionality: fully functional, For sale: CNC lathe EMCOturn 340 TC with Siemens Sinumerik 810 T control. Control: Siemens Sinumerik 810 T Iasdpfsx U Ua Usx Adwjl Tailstock: Hydraulic (currently non-functional – jammed, repair required) Steady rest: Röhm Power chuck: Röhm Duro NC 168 (hydraulic, with jaw quick-change system) Tool turret: 8-position, VDI 30 mm Various VDI 30 tool holders Additional scope of delivery: centre points, spare parts, manuals, and technical documentation

Condition: good (used), Year of construction: 2007, operating hours: 29,849 h, functionality: fully functional, The Emco Maxxturn45 SYM is in good condition and is still in daily production. The machine has primarily been used for small batch production. Six months ago, the operator panel with display and the climate control unit were replaced. The last maintenance was performed in September 2025, and the machine geometry was measured. The machine can be inspected in production until calendar week 4/2026. Technical data: - Control system: Siemens 840 D - Machine equipped with Y-axis Main spindle: - Speed: 6,300 rpm Counter spindle: 6,300 rpm - Maximum bar capacity: 45 mm - 2 x C-axis, 0.001° - High-pressure coolant system at the tool turret - Chip flushing unit for counter spindle - Sauter tool turret with 12 stations, VDI25 - All stations suitable for driven tools - Speed range: 6,000 rpm - Travel in X/Z/Y axes: 160/510/ +40 / -30 mm Accessories: - Knoll chip conveyor - 2 x Hainbuch collet chucks for SK52 collets - High-pressure coolant pump - Parts catcher - Interface for bar feeder - New electrical cabinet climate control unit - LED signal lamp, 4 wedge shoes, machine documentation - Machine keyboard with cover - 8 fixed tool holders VDI 25 - 2 x axial driven tools - 1 x radial driven tool The tools visible in the images are not included in the sale. Isdpfjx Tu Rqex Adweal

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, torque: 192 Nm, workpiece weight (max.): 30 kg, total height: 1,829 mm, total length: 4,066 mm, total width: 2,583 mm, collet bore: 73 mm, bar diameter (max.): 73 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very neat condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation, type Iridium Ir 25F, but has seen little production since then. PLEASE NOTE! The 2 panels with laser/motion sensor are not shown in the photo but are, of course, included. This CTX alpha 500 is equipped with: - BMO Iridium Ir25F automation (2020). - LNS Quick Load Servo III bar feeder (2016). - Schunk Rota THW plus powered chuck with quick-change jaw system. - Various top jaws. Iajdpfx Adox Rqwhowel - DMG CELOS software. - Chip conveyor. - Workpiece catcher/ejector. - Tool measurement arm. - Foot pedal for chuck clamping/unclamping. - Miscellaneous tooling (driven & static). - Original DMG documentation.

Condition: excellent (used), Year of construction: 2021, Turning length: 1,500 mm Max. turning diameter: 670 mm Max. main spindle speed: 5,000 rpm Max. sub spindle speed: 5,000 rpm Milling unit tool holder: CAPTO C6 Isdpfxex Nm Uaj Adwjal Includes HAINBUCH chuck with quick-change system Includes bar feeder Includes KNOLL chip conveyor / band filter Includes various tools Includes complete documentation

Condition: good (used), Year of construction: 2008, Weiler DZ 40, Year of manufacture 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Y axis +/- 25 mm, Iodjx U S D Djpfx Adwoal Tailstock MK 4, Main spindle max. bar capacity 42 mm, Spindle bore 52 mm, Rapid traverse X/Z/Q 30/30/20 m/min, 16-position turret – all stations driven, Shank diameter 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Rigid holders,

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Technical data: x-travel 630 mm y-travel 600 mm z-travel 670 mm Tool holder BT 40 Isdpfx Ajvuql Uedwoal Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Total power requirement 56 kW

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Iajdpfx Aoxy Tmnsdwjl

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" Iedpfxox Apkzj Adweal - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: used, Year of construction: 2007, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increments) Turning length (mm): 399 Max. turning diameter (mm): ø190 Distance between spindle noses (mm): 750 Spindle bore (mm): 65 Iajdex Rvivspfx Adwsl Upper turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Lower turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Main spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle: Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment: Parts catcher Bar feeder: LNS HYDROBAR SPRINT Rated power (kVA): 67.2 Basic machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: excellent (used), Year of construction: 2024, operating hours: 1,427 h, functionality: fully functional, turning length: 500 mm, turning diameter: 380 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, torque: 465 Nm, bar passage: 80 mm, workpiece weight (max.): 400 kg, total height: 1,857 mm, total length: 6,650 mm, total width: 1,845 mm, bar diameter (max.): 80 mm, overall weight: 5,950 kg, Equipment: documentation/manual, Mazak QUICK TURN 250MSY – Complete Package incl. Bar Feeder – As New (Year 2024) Description & Reason for Sale: For sale is a cutting-edge Mazak QT 250MSY (built at the end of 2024) in absolutely full-spec configuration. The machine is optimized for automated complete machining from bar stock and comes with an extensive, high-quality package of tooling and clamping devices. After commissioning, we decided to sell the machine as the control system’s operating concept differs too much from the rest of our machine inventory and does not ideally fit our internal programming workflow. Since we are aiming for a unified operating concept, this powerhouse is now available for immediate sale. The Mazak is currently still integrated into our production. Please note that operating hours may slightly change before the sale date. Inspection under power and in operation is possible on short notice by appointment. Technical Highlights: - Control: MAZATROL SmoothG (19" touchscreen) with Intelligent Safety Shield & collision protection - Working area: Max. turning diameter 380 mm, turning length 500 mm, Y-axis travel 100 mm - Main spindle: 26 kW, max. 4,000 rpm, C-axis (0.0001°), spindle bore 91 mm - Sub spindle: 11 kW, max. 6,000 rpm, for fully automatic rear-side machining - Turret: 12 stations (VDI), all live (5.5 kW, 6,000 rpm) - Dynamics: Rapid traverse X/Y/Z: 30 / 10 / 33 m/min Included Accessories & Automation: Iaedpfx Adsx Tcttowol - Bar feeder: TOP Automazioni (Magic) short bar loader - Clamping devices: 10” 3-jaw power chuck (main spindle), collet chuck system (main spindle), collets Ø (25, 35, 40, 45, 50, 60, 65, 75, 80) - Various draw tubes and adapters for different diameters (16, 17, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71, 76) - Tool package: Mazak standard holder package - Driven WTO angular head for main and sub spindle - 4-position tool holder, drill holder (main/sub), and 4-position boring bar holder - Additional options: Tool Eye (automatic tool measuring), parts catcher, 15 bar high-pressure coolant, Mayfran chip conveyor (side discharge), and engraving function Technical Data: - Year of manufacture: End of 2024 - Max. turning diameter: 380 mm - Max. turning length: 500 mm - Spindle bore: 80 mm (bar) - Main spindle power: 26 kW - Torque: 465 Nm - Weight: approx. 5,950 kg - Dimensions: 6650 x 1,845 x 1,857 mm (incl. bar feeder & chip conveyor)

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min spindle bore 75 mm bar diameter 51 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW Ijdpfx Asttckmsdwjal voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: excellent (used), Year of construction: 1998, CNC Lathe Gildemeister CTX 200 E Year of manufacture: 1998 Heidenhain CNC Control Technical Data: CNC Control: Heidenhain Maximum turning length: 350 mm Maximum turning diameter: 160 mm Maximum bar diameter: Ø 42 mm Tool turret capacity: 12 positions (driven) Maximum spindle speed: 5000 rpm Spindle drive power: 7.5 kW Equipment of the CNC Lathe: Chuck spindle Driven tools Bar feeder: IEMCA VIP 70 CNC Iedpfx Aew I Swcodweal Tool holders and jaws

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Isdpsxy Tlwofx Adweal

Condition: excellent (used), CNC MASTERWOOD CN10/CN12 PROJECT 500 XL + Programming + Tooling Extra-long XL machine, fully equipped for interior fittings, kitchens, wardrobes, doors, and all standard carpentry work. Working area X = 6,200 mm – Y = 1,660 mm – Z = 150 mm Main motor power: 8 kW – 10-position tool changer – 17 vertical drilling spindles Maximum spindle speed: 24,000 rpm – Tool clamping system: ISO 30 – 4 horizontal drills in X – 2 horizontal drills in Y – Notching saw tiltable to 90° – Gantry frame construction – 10 support consoles – 2 active vacuum pumps + 1 backup vacuum pump – Safety system with guard rails and safety mat Includes 1x chip conveyor – Safety barriers Iasdpfsx U Tpnsx Adwol The chiller and air dryer integrated in the machine are new – The vacuum pumps were overhauled in 2021 – Ceiling-mounted laser for positioning suction cups and workpieces – The computer system and programming (with internet and USB access) are new and were updated in 2021. Dimensions: 10m x 3.30m x 3m – Approx. weight: 5,000 kg Machine sold complete with programs, control console, tooling, and accessories. In good technical and visual condition.

Condition: used, Year of construction: 2005, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Iajdpfx Adjx Rvipewol Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increment) Turning length (mm): 399 Max. turning diameter (mm): ø 190 Distance between spindle noses (mm): 750 Bar working capacity (mm): 52 Upper turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Lower turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Main spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment Parts catcher Bar feeder LNS HYDROBAR SPRINT Nominal kVA: 67.2 Base machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: new, Year of construction: 2022, The new numerical control universal drilling machine for woodworking shops and craftsmen with very good price / performance ratio. machine incl. options: sensor for work piece calibration / measuring pressure booster for drilling spindles in Z - axis automatic lubrication system incl. SCM software "Maestro cnc" qwerty keyboard 10'' Touch Screen dDrilling head and grooving operations with 11 independent spindles and integrated blade in X direction max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm min. workpiecedimensions X-Y-Z = 300 x 90 x 10 mm max. speed der X-Y axis 20 m/ min spindels in X-axis # 2 spindels in Y-axis # 2 spindels in Z-axis # 7 Iajdpfx Adofhy R Newsl grooving unit saw blade DM 125 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 81399, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 3,765 mm Y-axis travel: 1,585 mm Z-axis travel: 170 mm C-axis: 360° Iodpfxox Rbpbj Adweal Worktable zones: 9 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,500 mm x 2,450 mm x 2,400 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 4 EQUIPMENT Central lubrication 12 kW electrospindle, ISO 30, air-cooled Biesse WORKS Biesse NEST MODULE Air conditioning 16-position rotary magazine 2x vacuum pump 250 m³/h BH 17 L drilling unit Loading and unloading system

Condition: excellent (used), Year of construction: 1997, Manufacturer SAEILO (Germany) Model CONTUR TV 1000 Year of issue 1997 Control system HEIDENHAIN X/Y/Z-axis movement 1016 / 610 / 508 mm Table size 1080 x 580 mm Max. Table load 600 kg Tool change 40 Spindle taper SK 40 Cutting feed speed X / Y / Z 0.25 to 5080 mm/min Rapid traverse X / Y / Z 20000 mm/min Rapid traverse Z 1500 mm/min Spindle speed 5-8000 rpm Spindle power 11 / 16.5 kW Machine weight 6000 kg Isdpougltxefx Adwjal

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Iaodpfxjw Dcccj Adwel

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAIN SPINDLE: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4,000 rpm Max. spindle bore: 80 mm Max. machinable diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools: 12 pcs. Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6,000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3,800 x 2,143 mm Machine height: 2,232 mm Machine weight: 6,100 kg Iodpfxox Rvgzj Adweal ACCESSORIES: Control: MORI MSX-850 II Tool measuring device Parts removal Chip conveyor Coolant tank Tool holders and driven tools

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Iaodew Slfbspfx Adwjl Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Iedpsw Dcb Ssfx Adwoal

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Iaodpfsrfw Nhox Adwjl Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Technical data: Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Iaedow Tarfepfx Adwel Number of tools: 40 Tool length / Max. quantity: 350/40 mm