Used Centering for sale (13,347)

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Fpsdpfx Afozf Ibdjpei Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Fpjdszf H Ezepfx Afpji Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), Year of construction: 2006, operating hours: 5,366 h, functionality: fully functional, machine/vehicle number: 11415551674, controller model: Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, table diameter: 600 mm, TECHNICAL DETAILS Spindle speed: 10,000 rpm Table diameter: 600 mm Number of tool changer positions: 16 Fsdpfxjzhmw Aj Afpspi Tool system: SK40 MACHINE DETAILS Control model: Heidenhain iTNC 530 Control operating hours: 24,237 h Automatic operating hours: 5,366 h

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 11065357454, spindle speed (max.): 6,000 rpm, control type: CNC control, number of axes: 3, TECHNICAL DETAILS Pallet size: 400 mm Spindle speed: 6,000 rpm Tool holder: SK40 MACHINE DETAILS Control type: CNC controlled Number of axes: 3 Fedpjzhmvljfx Afpopi EQUIPMENT Tool change: manual

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h Fpsdpfszgt U Ejx Afpji EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Rotoclear viewing window Temperature monitoring

Condition: ready for operation (used), Year of construction: 2010, operating hours: 10,106 h, functionality: fully functional, machine/vehicle number: 107.86.00.246, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Spindle speed: 24,000 rpm Fpjdpfezgt Uljx Afpsi Table dimensions: 900 x 630 mm Number of axes: 3 MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,550 x 2,900 mm Machine weight: 8,300 kg Connection: 400 V Operating hours Operating hours, control system: 58,372 h Operating hours, machine: 26,800 h Programmed hours: 10,106 h

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,897 h, functionality: fully functional, machine/vehicle number: 107.84.01.011, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 350 mm, controller model: Heidenhain TNC 430 M, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 350 mm Fodezf E I Uspfx Afpepi Feed rate (X/Y/Z-axis): 40 m/min Axis acceleration (X/Y/Z-axis): 10 m/s² Spindle speed max.: 42,000 rpm Spindle torque (40% duty cycle): 4.25 Nm Spindle torque (100% duty cycle): 3.2 Nm Feed rate, B-axis max.: 54,000 °/min Feed rate, C-axis max.: 90,000 °/min Tool interface: HSK-E40 Tool magazine: 18/36/68 tools Tool change time: approx. 10 s Chip-to-chip time: approx. 12.5 s Erowa UPC pallet system (L x W): 320 x 320 mm Workpiece weight max.: 200 kg MACHINE DETAILS Control model: Heidenhain TNC 430 M Spindle power (40% duty cycle): 13 kW Spindle power (100% duty cycle): 10 kW Spindle operating hours: 26,897 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,400 x 2,800 mm Total weight: 6,500 kg EQUIPMENT STEP-TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Erowa UPC pallet system

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,231 h, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, overall weight: 11,000 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm C-axis swivel range: 360° Tool interface: HSK-E63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle types: NCD 150 PL, NCD 200 PL Operating hours, control ON: 30,064 h Operating hours, machine ON: 10,322 h Operating hours, program execution: 4,159 h Operating hours, drives ON: 7,331 h Operating hours, spindle ON: 4,231 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 3,000 x 2,800 mm Total weight: 11,000 kg EQUIPMENT Chip conveyor Fjdozf E I Iepfx Afpjpi Coolant system with filter system Documentation available

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Fedpfjzkapksx Afpspi Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Fjdpszgfvbsfx Afpspi Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain TNC 530, TECHNICAL DETAILS Work Area Table surface: 2,300 x 1,600 mm T-slots: 22 mm Distance between T-slots: 200 mm Workpiece weight with optimal distribution: max. 6,000 kg/m² Distance between columns: 2,700 mm Distance between table surface and spindle center: max. 1,220 mm Travel / Axes Travel X-axis: 2,200 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,000 mm Feed rate X/Y-axis: 0 - 60 m/min Feed rate Z-axis: 0 - 40 m/min C-axis rotation: ± 370° A-axis rotation: ± 105° A-axis torque: max. 830 N·m C-axis torque: max. 1,200 N·m Milling Head / Spindle Milling head: TOE 29 T, 5-axis orthogonal milling head Spindle mounting: HSK 63 A Spindle power: 29 / 37 kW Spindle torque: 92 / 115 Nm Spindle speed: max. 20,000 rpm Constant torque range: 0 - 3,000 rpm Tool Changer Tool changer: Automatic tool changer Tool holder: HSK 63 A-100 Magazine capacity: 42 stations Tool diameter: max. 80 mm Tool length: max. 350 mm Tool weight: max. 8 kg MACHINE DETAILS Control model: Heidenhain TNC 530 Cooling / Measuring Systems Tool coolant supply through the spindle: 20 bar Coolant flow rate: 25 l/min Measuring system X/Y/Z axis: Heidenhain glass scales Measuring system C-axis: Heidenhain angle encoder EQUIPMENT Heidenhain TNC 530 CNC control 5-axis orthogonal milling head TOE 29 T Electric spindle HSK 63 A Automatic tool changer with 42 stations Tool coolant supply through the spindle Laser tool presetter BLUM Heidenhain glass scales on X, Y, and Z axes Heidenhain angle encoder on the C-axis Thermal insulation and stabilization of the crossbeam Central lubrication system 2 chip conveyors Portable handwheel Heidenhain HR 520 15" TFT color monitor with soft keys Full enclosure with CE safety standard Fjdpszhnk Dofx Afpspi Control cabinet with air conditioning Rinsing gun Sliding roof for loading and unloading Note: Operating hours can be found in the last image.

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Fpodjzka Hispfx Afpsi Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Fpjdpjzka Akofx Afpji Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Fedpfx Afsy D E Syjpopi Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg CNC Control : Fanuc Oi-MC

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm Fsdpfxjx Anlwe Afpjpi CNC Control : Fanuc 30i

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Fedpfjx Ehi Iox Afpopi Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) Fpedpfex Adn Usx Afpji CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: not inspected (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: UCP 1000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens 828D, General specifications Control: Siemens 828D Weight: Approx. 10,100 kg Machine Type: 5-axis vertical machining centre Year of manufacture: 2001 M/C Model: UCP 1000 Power requirements: 3 Phase 400 V (100 A) Travel and movement X-axis: 1,000 mm Y-axis: 750 mm or 800 mm Fsdpfx Afjyz Tnwopepi Z-axis: 750 mm or 800 mm Rapid traverse rate: 30 m/min Max. working feed: 10 m/min Spindle and tool changer Spindle speed: Max. 15,000 rpm Spindle taper: HSK-A63 Tool magazine: 60 stations Max. tool weight: 8 kg Max. tool length: 300 mm Table and axis NC rotary swivel table: Diameter 800 mm or 1,100 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Other features Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant: Through spindle coolant available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames Fodpfx Afexu Uhvopepi - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 2008 ATC-40 tools . BT40. 2 Pallets Fpedpsziflzjfx Afpei spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Number of pallets: 2 Automatic pallet changer under power Located in Israel ready for inspection

Condition: used, Year of construction: 2012, FANUC Robodrill Fanuc 31i control Fpsdpfxozktvke Afpji X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed: 24,000 rpm Lehmann EA510 5-axis rotary table Blum part probe Height probe on the table

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse Fpjdpfxszk I Rvs Afpoi 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software Fpedpfx Aeyr Acksfpsi ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, HIGH PRODUCTIVE CNC MILLING/DRILLING/CUTTING WORKING CENTRE WITH 4 CONTROLLED AXES, 3 VERTICALS ELECTRO-SPINDLES 1 HORIZONTAL ELECTRO-SPINDLE • Heavy duty mono-block frame with electro-welded steel sheets. • Nominal working strokes: X-3350 mm; Y-200 mm; Z-180 mm • Possibility to work in two working fields - length 1500 mm each • Working head: With 3 axes CN Controlled equipped with Vertical and Horizontal electro-spindles. Linear and circular interpolation on 3 axes (X, Y, Z). • Axes positioning speed: max 70 mt/min. • Vertical Electro-Spindles: 1 drilling spindle – 1.7 kW / 4350 rpm Equipped with point-to-point drilling head featuring: • 5 vertical spindles (32 mm center distance) • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) 1 milling/mortising spindle – 7.0 kW / 12,000–18,000 rpm 1 cutting/milling/drilling spindle – 7.0 kW / 8,000–12,000 rpm Fpsdpjw D D Dnsfx Afpei Multi-function aggregate • Horizontal Electro-Spindle: 1 milling/mortising spindle – 5.6 kW / 12,000–18,000 rpm Tool holder: ER32 collet • Working tables: 4 + 4 workpiece support tables. Mounted on adjustable slides, each equipped with: 4 + 4 vertical pneumatic clamping cylinders 2 + 2 horizontal pneumatic clamping cylinders Frontal and lateral reference stops • Control unit CAD-CAM: Stand-alone electrical cabinet with industrial PC (17” - touch-screen). Possibility of Network connection • Perimeter protection cabin made of panels with safety front door automatically activated and synchronized with machine cycle. • Voltage 400V / 50 Hz

Condition: used, Year of construction: 1999, travel distance X-axis: 2,040 mm, travel distance Y-axis: 1,295 mm, travel distance Z-axis: 1,198 mm, nominal power (apparent): 37 kVA, controller manufacturer: FANUC, workpiece length (max.): 1,000 mm, workpiece width (max.): 1,000 mm, workpiece weight (max.): 3,000 kg, DOUBLE TABLE MORI SEIKI MH-1000... MAINTENANCE PERFORMED BY MORI SEIKI AUTHORIZED SERVICE. X-axis Movement: 2000 mm Y-axis Movement: 1300 mM Z-axis Movement: 1200 mm Platform Size: 1000×1000 mm Fpedpfxszh Dc Ns Afpoi Maximum Table Load: 3000 kg Spindle (Spindle) Spindle Taper: BT50 Maximum Spindle Speed: 6000 RPM Spindle Power: 37 kW (approx. 50 hp) Tool Capacity (ATC): 60 positions Chip Conveyor: Available Approx. Machine Weight: 40 Tons