Used Cnc Center for sale (18,716)

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power. Bodpfxszcwt So Amnoli

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm Bljdpfjw Hg Nlex Amnji * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: ready for operation (used), Year of construction: 1998, A Hedelius CNC 3-axis machining center is available. Travel X/Y/Z: 2490mm/630mm/750mm, table dimensions X/Y: 3200mm/650mm, tool holder: SK40, spindle speed: 8000rpm, tool positions: 48, coolant tank volume: 350l. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3700mm, weight: approx. 16500kg, control: Heidenhain TNC426. Including coolant tank, divided working area, chip conveyor and through-tool coolant. Documentation available. An on-site inspection is possible. Bjdpjzhnrzjfx Amnjli

Condition: ready for operation (used), Year of construction: 2007, A CNC 5-axis pentapod machining center Metrom is available. Axes: 5, Travel X/Y/Z/V: 1600mm/2800mm/1000mm/3200mm, A-axis swivel: 90°, Table dimensions X/Y: 1600mm/1800mm, Tool interface: HSK63, Speed: 15000rpm, Spindle power: 25kW/32kW. Machine dimensions X/Y/Z: approx. 6500mm/4000mm/4500mm, Weight: approx. 14000kg, Control: Andronic 2060. Including enlarged worktable, coolant system with 200l tank, Blum TC 50 3-D touch probe, additional holder and milling spindle. Documentation available. An on-site inspection is possible. Bljdpfxezhnr Io Amnsi

Condition: ready for operation (used), Year of construction: 2009, A vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, table dimensions X/Y: 1000mm/560mm, max. table load: 800kg, tool holder: SK40, spindle speed: 10000rpm, tool stations: 30, rapid traverse: 30m/min, positioning accuracy: +/-0.008mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 3700mm/2450mm/2750mm, weight: approx. 4100kg, control: Heidenhain iTNC530, operating hours: approx. 16000h, spindle hours: approx. 8000h. Including chip cart, chip conveyor and belt filter. Documentation available. An on-site inspection is possible. Bodpfx Amjzhnt Eensli

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm Bledpfxew Ed U Nj Amnei X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Blodpfx Amozhdrkenei Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123ControlHeidenh ain iTNC 530 HSCI (3D path control)Travel PathsX: 1,850 mmY: 2,100 mmZ: 1,250 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-fold chain magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lRotating viewing window3D quickSETMachine Protection Control (MPC)Adaptive Feed Control (AFC)ATC (Application Tuning Cycle)DMG MORI NetServiceDMG MORI SMARTkeyDocumentation and electrical schematic (German) Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Travel X-axis: 1850 - mm Year of construction: 2,012 Bedpfezhdrdex Amnjli Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163Control SystemHeidenhain iTNC 530 HSCI (3D path control)Travel PathsX: 2,700 mmY: 2,700 mmZ: 1,600 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 2,200 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Tool holder: SK50 according to DIN 69871Tool Changer63-slot wheel magazineDouble gripperEquipmentIKZ 40 barChip conveyorElectronic handwheelRotating viewing windowMinimum quantity lubrication (MQL)Coolant through spindleCoolant tank 980 lMold making packageActive chatter suppression (ACC)Adaptive feed control (AFC)Oil/emulsion mist separatorSmartkey packageAdditional safety viewing windows (Visiport)Operating mode 4 (process observation) Bledozhdq Tepfx Amnsi Weight approx.: 85,000 kg Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2014, turning length: 1,693 mm, turning diameter over cross slide: 1,030 mm, turning diameter: 690 mm, Multicut 500iT 5-axis turning center in very good condition. (X, Z1, Z2, C, B, Y axes). The machine was installed in September 2014 and has undergone regular maintenance. It is a very powerful and highly precise machine. Spindle on: approx. 13,700 hours, spindle hours: 4,500 Main technical data: CNC Siemens 840D Bledpfx Amozfhbwsnei Swinging diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis: 370 mm Spindle bore: 106 mm Bar passage through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Milling spindle power S6 40% duty cycle: 22 kW Milling spindle tool holder: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 positions Linear scales in X, Z, Y Tailstock MK6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Accessories: Forkart chuck type 3FNC with reversible hard jaws • Chip conveyor • Internal cooling through tool, 60 bar • Coolant gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm Ø), automatic up/down movement

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Bedpfx Aezhufhemnsli Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Bjdpszc Hipefx Amnsli Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Control: F31iA X axis travel mm: 560 Y axis travel mm: 560 Z axis travel mm: 630 B axis travel: 360.000° Table load capacity: 400 kg Cutting feed rate X/Y/Z mm/min: 50,000 Maximum rapid traverse X/Y/Z m/min: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Blodpfxeyhlqpj Amnoi Magazine type Magazine positions: 60 Maximum tool diameter mm: 70 Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through spindle coolant pressure bar: 70 EQUIPMENT Chip conveyor Through spindle coolant with high-pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measuring system Extended tool offsets: up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Extended program memory: Total length 1,280 m (512KB) Up to 1,000 storable programs Preparation for NH4000 8CPP + 8 Pallets

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Bsdpjydh Hlofx Amnjli Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: good (used), Year of construction: 1998, functionality: unexamined, Angelini DG 13 Year of manufacture: 1998 Control system: Fanuc Chip conveyor Tool turret: 12 positions Documentation and export are available for an additional charge. Inspection under power is possible. Bodozhikrepfx Amneli We would be happy to send you further details or arrange an on-site inspection.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Bljdowztq Espfx Amnoi Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: used, Machine Type Multi-Tasking CNC Turning & Milling Center Chuck Size 15" Main / 15" Sub Swing Over Bed 1,000 mm Swing Over Saddle 700 mm Maximum Turning Diameter Ø760 mm Maximum Turning Length 1,540 mm Maximum Bar Capacity Ø102 mm Main Spindle Speed 3,000 rpm Sub Spindle Speed 3,000 rpm Main Spindle Motor 30 kW Sub Spindle Motor 30 kW Milling Spindle Speed 12,000 rpm Milling Spindle Motor 22 kW Milling Spindle Taper Capto C6 B-Axis Rotation ±120° Y-Axis Travel ±150 mm (300 mm Total) X1-Axis Travel 695 mm Z1-Axis Travel 1,585 mm X2-Axis Travel 235 mm Z2-Axis Travel 1,540 mm Tool Magazine Capacity 40 Tools C-Axis Main & Sub Spindle Rapid Traverse 48 m/min CNC Control FANUC 31i Key Features ✔️ High-Performance Multi-Tasking CNC Turning & Milling Center ✔️ Simultaneous Turning, Milling, Drilling and Tapping in a Single Setup ✔️ Powerful 12,000 rpm Integrated Milling Spindle ✔️ High-Rigidity B-Axis Milling Head (±120°) Bsdszh H H Rjpfx Amnoli ✔️ Main & Sub Spindles with Full C-Axis Control ✔️ Large Y-Axis Travel (±150 mm) ✔️ 40-Tool Automatic Tool Changer (ATC) ✔️ Capto C6 Tooling System ✔️ Heavy-Duty Box Guideway Design ✔️ Excellent Surface Finish and High Machining Accuracy ✔️ Reduced Setup Time and Increased Productivity ✔️ Ideal for Complex Parts Requiring Complete Machining

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 8,000 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total width: 2,100 mm, total length: 2,200 mm, table width: 410 mm, table length: 900 mm, table height: 820 mm, type of input current: three-phase, table load: 350 kg, overall weight: 3,630 kg, controller manufacturer: Fagor, controller model: 8055 iA/MC, coolant supply: 2.7 bar, tool diameter: 100 mm, tool length: 300 mm, tool weight: 8,000 g, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor Blsdpfx Aezcyivemnji - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time.

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Blsdpfx Aew Rbcysmnji

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 12,700 kg, spindle motor power: 18,000 W, DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h Spindle performance: 18 kW Control: Heidenhain iTNC 530 ShopMill Travel Y-axis: 700 - mm Tool Changer: Yes Dimensions (LxWxH) approx.: 5000 x 3000 x 3000 mm Tool holder type: SK 40 Blsdjy Tkdgspfx Amnei Travel Z-axis: 700 - mm Weight approx.: 12,700 kg Travel X-axis: 1800 - mm Grinding spindle speed: 14000 - rpm Year of construction: 2,011 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Blsdpszcwyljfx Amnoi Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Travel monitoring ✓ Manufacturer's warranty until 03/26/2027 ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records Complete automated production cell The system is designed for the automated machining of round stock. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg Bledpfx Amezhltcenoi The WEKAL automation system handles the loading and unloading of workpieces and enables economical operation with minimal manual intervention. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • Conveyor length WRB roller conveyor 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Travel monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • Complete documentation available • Ongoing maintenance including records • Manufacturer's warranty until 03/26/2027 • Available in the short term The system can be inspected while powered on. Training and instruction are possible. Programming and setup of your components are possible. Sale ex works. Buyer organizes disassembly, loading, and transport.

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter Bsdpfxezcqx Io Amnsli OKUMA - MacTurn 50

Condition: excellent (used), SPINNER TC600-65 SMCY | Year of manufacture 2012 | Y-axis | BMT45 | driven tools | Siemens 840D | 15 bar HPC For sale is a high-quality CNC turning center, the SPINNER TC600-65 SMCY, manufactured in 2012. Technical data: Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Type: TC600-65 SMCY Year of manufacture: 2012 Machine number: AT0560 Working area: • Max. turning diameter: 400 mm • Max. turning length: 650 mm • Max. swing diameter: 600 mm • Travel in X-axis: 275 mm • Travel in Y-axis: mm • Travel in Z-axis: 700 mm • Spindle bore: 65 mm Tool system: • 16-position turret BMT45 • 16 driven tool stations • Spindle orientation • Tool measurement in the working area Control system: • Siemens 840D Equipment: • Y-axis for complex milling and drilling operations • 16-position BMT45 turret with driven tools • Direct measuring system in the X-axis • Tailstock • High-pressure coolant system 15 bar • Automatic sliding door • Robot interface for automation solutions • Hardened and ground slideways • Heavy-duty, FEM-optimized machine bed made of cast iron • High vibration damping for precise machining results Electrical data: • Mains connection: 400 V • Frequency: 50 / 60 Hz Bedpfx Amozgvgkjnjli • Operating current: 53 A • Rated current: 63 A ✔ Y-axis and driven tools for complete machining ✔ Automation-ready via robot interface ✔ Powerful Siemens Sinumerik ONE control system Bar loader: CUCCHI GIOVANNI CNC-DB70 Stand loader 3300mm, 12-70mm diameter Year of manufacture 2012 is included in the price. The machine is in technically perfect and well-maintained condition and can be inspected under power by appointment. Further technical documentation, accessory lists, videos, as well as information on price and availability are available upon request.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Bjdpek Iugzsfx Amnjli