Used Cnc Corner Cleaning Machine for sale (67,833)

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Hsdpfxsya Iaqo Abhop Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic cleaning machine with rotating table CNC cleaning machine Hsdpfx Asywcv Nobhep

Condition: excellent (used), Corner jointing machine, Pressta 4000 Hsdpfxel Skl Ds Abhop Shipping within the EU: approx. €350

Condition: used, Hydraulic CNC profiling and grooving machine LEISTRITZ, Type Polymat 50 / 400 CNC Hsdszd Hiqepfx Abhep Machine No. 90, Year of manufacture 1990 Groove width max. 50 mm Working stroke max. 400 mm Maximum drawing force approx. 15.9 kN Groove depth feed rate 0 to 0.5 mm/stroke Cutting speed max. 20 m/min Return stroke speed max. 40 m/min Table size 440 x 595 mm Number of T-slots 3 T-slot width 14 mm Working height - table height 1405 mm Hydraulic oil tank capacity approx. 150 liters Cutting oil tank capacity approx. 35 liters Motor power (hydraulics) 5.5 kW Mains connection 380 volts, 50 Hz - CNC control POLYMAT - Machining functions: Drawing - Automatic feed with shut-off - Hydraulic working stroke - Infinitely adjustable cutting speed - Oil lubrication - Hydraulic cylinder fitted with new sealing elements (2/2025) - Various accessories as shown Weight 1700 kg Space requirement L x W x H 1080 x 1400 x 1405 mm Good condition

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Hjdpfewtnxnsx Abhjp Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: new, Year of construction: 2026, Brand new precision vertical slotting machine – a machine of exceptionally high quality. CNC-controlled vertical slotting machine with two, three (or four) CNC axes and electronic rotary table control with a positioning accuracy of 0.001°. Ideal for the efficient production of keyways (including tapered and tangential slots), spline hubs, internal and external gears, racks, etc. CNC control with 10" color display and touchscreen – software for roughing, finishing, and fine finishing (enabling surfaces of the highest possible quality). Stroke range of slotting ram: 10 to 250 mm Slotting ram speeds: 22 to 90 strokes/min, infinitely adjustable Slotting ram swivel range: +/- 20° Rotary table diameter: 450 mm Hedszhkkyjpfx Abhep Rotary table bore Ø: 135 mm Maximum table load: 1,250 kg Table travel (X/Y): 250 x 225 mm Ram drive servomotor power: 3 kW Machine dimensions without control console: 1.3 x 1.45 m x approx. height 2.6 m Machine weight approx. 1,700 kg - Automatic electronically monitored central lubrication system for the guideways - Cutting oil system for coolant supply to the slotting tools Other models available.

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining Hsdpfszhkbfex Abhjp

Condition: excellent (used), functionality: fully functional, Industrial High-Performance Sheet Pan Cleaning Machine TOP Jeros Model: 9029TS with 9020 Capacity: 800–1000 trays/hour With oiling system/for external oil tank Touchscreen control for automatic sheet pan cleaning Premium stainless steel construction Connection: 400V, 16A-CEE plug Used machine, cleaned Options: Maintenance contract Service package Hjdpfx Ajxwtnyjbhjp Delivery service Commissioning / Training Visit our large machinery warehouse!

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Hsdpfxsy Nx Ufs Abhjp Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: good (used), Parts on table not come. Marked with red. Hodpswxdyxjfx Abhep

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Hsdpfx Aowk Nm Ijbhop 10.000 rpm

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 Hedpfozf Hyrox Abhsp If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM drilling machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm MACHINE DETAILS Hsdpjzhnigjfx Abhop Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection CAD import with intuitive touch operation Detection of holes by color code Automatic wear compensation Blind hole machining with depth control 3-stage discharge control Thread erosion for hardened materials M3 - M16 Generator power booster for large diameters Indexing axes, 1- and 2-axis available Large water tank with 175 l and filter system Drilling depth measurement Automatic electrode control

Condition: used, Year of construction: 2007, operating hours: 1,341 h, functionality: fully functional, fuel type: diesel, total length: 226 mm, construction height: 1,270 mm, drive type: Diesel, construction width: 123 mm, sweeping width: 1,270 mm, Sweeper machine Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid rubber Rear tire type: Solid rubber Hedpozfb Dfsfx Abhop Description: In addition to this machine, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and certified according to FEM 4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease-to-own and financing options are available on request at favorable terms. We will be happy to provide you with expert and detailed advice on our vehicles.

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4 Hsdpfxoywafuj Abhjp

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 Hodezc Ekrepfx Abhop -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Hedpfsun Rqgex Abhjp Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h Hjdpfxjwvr Tnj Abhop

Condition: excellent (used), X-axis: 6,000 mm Y-axis: 1,500 mm Z-axis: 1,500 mm Max. workpiece size: 6,000 x 1,500 x 1,500 mm Spindle connection: SK50 Spindle speed: 4,000 rpm Control system: HEIDENHAIN TNC 426 Including documentation. Hodezcpwvspfx Abhsp Machine was overhauled in 2002, is in very good condition, and can be inspected while powered on.

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Hedpfx Abjzcpplehjp Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Hodpfx Abozff A Eohop Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Hsdpfxey Extmj Abhop Fuse rating: 25 A Control voltage: 24 V The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Additional equipment Chip extraction system included Optional (separate offer) Hodpey Exytsfx Abhep Becker VariAir Control vacuum system Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Year of construction: 2010, BMS 4AL CNC vertical milling machine ECS 1801 CNC Robust milling machine for a wide range of applications Meehanite cast iron construction 5HP spindle motor with inverter (variable speed) Automatic X- and Y-axis feeds with 1/2 HP motor and inverter Hsdoupg Nuepfx Abhop Shelf ascent and descent with 1HP motor Large working area 305x1500 mm Spindle taper ISO 40 - Shank ø 105 mm Y- and Z-axis square guides Sliding on Turcite - B X and Y axes Case-hardened table and guides

Condition: used, 5-Axis CNC Machining Centre – EMMEGI SATELLITE TU/6.5 Manufacturer: Emmegi Model: Satellite TU/6.5 5-axis CNC machining centre designed for machining aluminium profiles and light alloys. Ideal for milling, drilling, tapping and complex multi-face machining operations in a single setup, ensuring high precision and productivity. The machine is equipped with a high-speed vertical electrospindle, automatic tool magazine, pneumatic profile clamps, and an Emmegi CNC control system, making it an ideal solution for the production of aluminium windows, doors, curtain walls and architectural aluminium structures. Main Features ✅ 5-axis CNC machining centre ✅ Suitable for aluminium profiles and light alloys ✅ Milling, drilling, tapping and multiple machining operations Hsdpozhbg Ssfx Abhop ✅ High-speed electrospindle ✅ Automatic tool magazine ✅ Pneumatic clamps for secure profile clamping ✅ Long worktable for machining long profiles ✅ CE marked Technical Specifications X-axis travel: 6,500 mm Y-axis travel: 800 mm Z-axis travel: 300 mm Weight: 6,500 kg Installed power: 26 kW Rated current: 77 A Power supply: 400 V – 3 Phase – 50 Hz