Used Cnc Rotary Transfer Machine for sale (93,920)

Condition: used, Year of construction: 2016, Hydromat HB32/16 Rotary Transfer Machine. S/No. HB32-768 (2016) Model Epic II Series CNC, Machine Type Hydromat 32/16, Current Machining hours 29,312, CNC Control System Bosch MTX, Horizontal Heads: 16, Vertical Heads: 8, Indexing time : 0,7 seconds, Max. Bar Diameter: 32mm, Max. Part Length: 150m, Weight: 6 500kg Complete with Hydromat Automatic Bar Feed, Swarf Conveyor Knoll 450-K1, Lubricating Tank Knoll VRF 450/2350, Filtration Unit Knoll VRF 450/2350, Air Filtration Erni AG Type A0-1800/2, Additional Heads and Extensive Spare Parts, Machine Manuals Location: This lot is located in South West of England, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Hfodpfoxfu Dfsx Aabjn

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Hsdpfx Aju Tln Noabefn Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, TECHNICAL DETAILS Hsdpfx Aeuhbwcsabefn - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Hfjdpfxoi Ew Dps Aabjn

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Hfjdpfx Aow H I R Roaben Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Hjdpfx Aaodg Da Isbjfn Serial Number 5531 Year 1988 Pristine Condition Not been used for 15 years

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Weight 800 kg Hfedpfx Aaev A Hcxjben Total power requirement 3,5 kw

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 110 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 150 mm, workpiece length (max.): 40 mm, workpiece width (max.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine's original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Hedswy I Tlepfx Aabsfn Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on the machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Table positioning repeatability: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tubing, extraction system and tubing Loading systems Vibrators Cabinets / side panels / upper channel / cabinet tops Platform Polycarbonate partitions Fire protection system with control console Further information on transportation dimensions can be found in the attached packing list.

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] Hedpou N Ivqsfx Aabsfn - Chips conveyor

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Hfjdpfx Ajp S Sq Djabjn

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Hfedew E Hpvepfx Aabjn Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 940x1250x1400 mm Weight 250 kg Hjdov A Hb Ujpfx Aabofn Total power requirement 3,5 kw

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] Hfodpfx Aouhbwieabon - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Hsdpfxovriq Rs Aabofn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2100x1800 mm Weight 1700 kg Hfodpfev A E Sfjx Aaben Total power requirement 7,5 kw

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 Hfsdpov Rgy Hjfx Aabsn * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: ready for operation (used), Year of construction: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier. Hsdpfxswv Um Dj Aabofn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2100x1800 mm Hfsdpfov A E R Iex Aabjn Weight 1700 kg Total power requirement 7,5 kw

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] Hfjdov Rgyyspfx Aabjn - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Hfedpfxju T Rg Rj Aabsn

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 /100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120/ 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrobroche Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18 000 [rpm] * Spindle power : 0.25 [kW] Hfodpfxjw Huhce Aaben - Spindle type : Electrobroche Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] * Spindle type : Electrobroche Ø120 - Number of spindles : 1 - Tool holder type : HSK40 * Spindle speeds : 8710 [rpm] * Spindle power : 3.8 [kW] * Spindle type : Electrobroche Ø38 - Number of spindles : 2 - Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] - Equipment EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120 - Loader - Fire-fighting device - Fitting

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Hsdpfxeu T Rhbj Aabofn

Condition: ready for operation (used), Year of construction: 2012, A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible. Hedpfx Ajw Rqw Teabjfn

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Hsdow Hglmopfx Aabsfn

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Hfodpfxjw Emx Ro Aabjn