Used Cnc Lathe With Y Axis for sale (27,932)

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Chjdpfxjtvl U He Alfod

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Chedpfx Aezdk A Ujlfed Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Chsdpswbu T Uefx Alfjd Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Csdpfxo Aawrls Alfjhd Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Machine Type: Turning Automaton MACHINE DETAILS Electrical Data Operating Voltage: 83 V Frequency: 50 Hz Cedj Ad Ik Hspfx Alfjhd Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 800 kg

Condition: ready for operation (used), Year of construction: 2018, CNC vertical lathe, 4 axes Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofit) Chodjw Add Eepfx Alfod CNC: FANUC 0i Specifications: Turning capacities: Max pass-through diameter: 2650 mm Max turning diameter: 2600 mm Max turning height: 1900 mm Table: Diameter: 2500 mm Max load: 15 t Turning speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel of right carriage: 760 mm Vertical travel of left carriage: 580 mm Cross rail: Vertical travel: 1600 mm Dimensions (W x D x H, fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Chodpfjzhaqcox Alfod

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Z-axis travel: 535 mm Codpfx Als Afw Rrefshd MACHINE DETAILS Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Height: 2250 mm Machine weight: 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Chedpfx Aj Abw U Ajlfed Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Chsdsyw Ii Ujpfx Alfed Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Counter spindle Counter spindle speed: max. 4,500 rpm Chsdpfs Afwtzsx Alfsd Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Chip conveyor Workpiece removal via conveyor belt

Year of construction: 2019, condition: excellent (used), travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, bar passage: 76 mm, spindle speed (max.): 3,400 rpm, CNC lathe Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: Chedpe Agrmuefx Alfsd - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information.

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm Codpfx Aox I Nbtelfshd X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Cjdpfxowq Rpwe Alfehd Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 Chjdsvw Uqaspfx Alfed - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: used, Year of construction: 2000, 5-Axis CNC Machining Centre – EMMEGI SATELLITE TU/6.5 Manufacturer: Emmegi Model: Satellite TU/6.5 5-axis CNC machining centre designed for machining aluminium profiles and light alloys. Ideal for milling, drilling, tapping and complex multi-face machining operations in a single setup, ensuring high precision and productivity. The machine is equipped with a high-speed vertical electrospindle, automatic tool magazine, pneumatic profile clamps, and an Emmegi CNC control system, making it an ideal solution for the production of aluminium windows, doors, curtain walls and architectural aluminium structures. Main Features Chodpfxozhbg Sj Alfed ✅ 5-axis CNC machining centre ✅ Suitable for aluminium profiles and light alloys ✅ Milling, drilling, tapping and multiple machining operations ✅ High-speed electrospindle ✅ Automatic tool magazine ✅ Pneumatic clamps for secure profile clamping ✅ Pneumatic clamps with automatic positioning along the worktable ✅ Long worktable for machining long profiles ✅ CE marked Technical Specifications X-axis travel: 6,500 mm Y-axis travel: 800 mm Z-axis travel: 300 mm Weight: 6,500 kg Installed power: 26 kW Rated current: 77 A Power supply: 400 V – 3 Phase – 50 Hz

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Codpfx Ao Afxvvslfehd Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Chjdpjz Hc T Ujfx Alfod Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 01620006501, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,800 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 3,000 kg, bar passage: 65 mm, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 620, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, nominal power (apparent): 21 kVA, operating hours of spindle: 10,771 h, DMG NEF 400 CNC lathe - Swing diameter over bed: 385 mm - Max. swing diameter over carriage: 350 mm - Distance between centers: 805 mm - Z-axis travel of tailstock: 680 mm - Height of spindle flange from ground: 1000 - 1010 mm - Diameter of spindle flange: 170 H5 mm - Diameter of chuck: 200/250 mm - Diameter of spindle bore: 87 mm - Diameter of draw tube: 67.5 mm Csds Afun Iopfx Alfshd - Diameter in the front bearing: 100 mm - Incl. C1 axis, speed: 200 rpm - Feed force in X/Z axis S1: 4.5 / 6.2 kN - Feed force X/Z axis S6: 6 / 8.5 kN - Ball screw X/Z axis: 32 x 10 mm - Diameter of tool holder: VDI 30 - Number of tools: 12 pieces, of which 6 are driven - Tool shank: 20 x 20 mm - Tailstock travel: 680 mm - Max. feed force: 680 daN - Morse taper: MK 4 The machine is equipped with a tailstock, a SAUTER turret, and a three-jaw chuck from the manufacturer SCHUNK, jaw width: 210 mm, with hydraulic clamping, including various VDI 30 tool holders, some driven and some standard, some fitted with lathe accessories, as well as a chip conveyor and documentation. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: good (used), Year of construction: 2003, *Description* ROSILIO TBI 280, a 2-axis CNC lathe in good overall condition. This robust 2200 kg machine is ideal for subcontracting and small production runs. User-friendly FAGOR 8055TC-A control system with a color screen. The machine is well-maintained and can be viewed in operation. *Technical Specifications* - *Make / Model*: ROSILIO TBI 280 Chodpozt Tk Hsfx Alfsd - *Year*: 2003 - *Serial Number*: CNC 0315063 - *Numerical Control*: FAGOR 8055TC-A - *Type*: 2-axis X-Z CNC Lathe - *Weight*: 2200 kg - *Dimensions*: L 2.0 m x W 1.45 m x H 1.8 m - *Voltage*: 400V 3-phase - 50/60Hz - *Installed Power*: 15 KVA - *Air Pressure*: 6 kg/cm² *Equipment* - Fagor 8055TC control panel with electronic handwheel - Coolant system - Hydraulic system - Automatic lubrication pump - Complete electrical cabinet

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 900 mm, turning length: 2,001 mm, turning diameter: 650 mm, spindle bore: 166 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 45 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, total height: 2,170 mm, total length: 6,750 mm, total width: 2,250 mm, overall weight: 11,750 kg, bar passage: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 480L” with Fanuc 21i-TB CNC complete with “AUTOBLOK K5Z” steady rest Codpfx Aju Ut Elslfshd

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chedpe Aay Aaefx Alfjd General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Knoll chip conveyor Compact belt filter for high pressure Parts conveyor belt Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: good (used), Year of construction: 2010, functionality: fully functional, FOR SALE Chede Af A Amjpfx Alfjd CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (year 2010) available for sale: CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (2010) Specifications and technical capabilities: - Machining capabilities: Max. turning diameter: 356 mm | Max. turning length: 705 mm | Bar capacity: 80 mm - Main spindle: Max. speed: 4,000 rpm | Spindle nose: A2-8 | Motor power: 26 kW - Counter spindle: Max. speed: 6,000 rpm | Spindle nose: A2-5 | Motor power: 11 kW - Turret and Y-axis: 12-position turret (all motorized, max. tool speed: 6,000 rpm) | Y-axis travel: ±50 mm Machine history and condition: - Numerical control: FANUC CNC - Identification: Manufactured in Japan in November 2010 - Certified hours: Power-on time: 16,311 h | Actual cutting time: 15,534 h | Operating time: 3,110 h - Maintenance: Machine in good condition, well-maintained and regularly serviced Equipment and accessories included: - Chip evacuation: Rear chip conveyor - Clamping: Equipped with a collet chuck - Turret tooling: Supplied with 5 drilling chucks and 2 double-sided external chucks - Important note: Sold without a drawbar, without a tailstock, and without a chip extraction system. Logistics: - Footprint dimensions: approximately 4.3 m x 2.1 m | Weight: 6,200 kg - Required power supply: 200V AC / 3-phase / 44 kVA

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW Cjdps Afg Tcjfx Alfjhd - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Cjdpozww R Sofx Alfjhd