Used Cnc Saw for sale (14,303)

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities Njdpfjxabacex Adhodd e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min Nedpfxob Scias Adhjdd forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Ndjdpsd Iiprefx Adhed Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: used, Year of construction: 2012, KASTO twinA2 year of production 2012 CNC band saw Automatic - Capacity in passage: 260 [mm] - Capacity on square: 260 x 260 [mm] - Capacity in rectangle: 260 x 260 [mm] - Dimensions of cutting blade: 4530 x 34 x 1.1 [mm] - Main engine power: 3 [kW] - Cutting speed: from 20 to 110 [m / min] Nodpswihh Usfx Adhodd - Dimensions of machine: 1755 x 2149 x 1568 [mm] - Weight: 1700 [kg] fully functional machine in super technical condition

Year of construction: 2014, operating hours: 2,800 h, condition: good (used), machine/vehicle number: 4198, Rotating-head bridge saw for natural stone, ceramics, and engineered stone Support travel X-axis: 3600 mm Support travel Y-axis: 4630 mm Z-axis height adjustment: 400 mm Saw blade max.: 725 mm Max. cutting depth: 255 mm Spindle motor speed: 800–6000 rpm Equipment: Vacuum separator Automatic material measurement Automatic tool measurement Camera Ndjdsw N Hdgopfx Adhod Tilting table 3500 x 2000 mm Table extension 3500 x 430 mm Control cabinet air conditioning Automatic central grease lubrication Rubber table cover Laser Adapter for finger milling cutters GMM software: - GMM CAD - GMM Mini CAD - GMM Parametric Figures - GMM Profile Saw Automation - GMM Teach-In with point laser - GMM Contour Milling

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR Ndsdjxmvm Rjpfx Adhsd KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm Ndodpfxsimwtro Adhed - volt. 380/50 - s/n 06 - CE rules (year 1998)

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min Ndodpfx Aoz N Amjdhsd cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) Ndedsupw R Ajpfx Adhjd • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: Ndjdpod Aai Tofx Adhod -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: excellent (used), Year of construction: 1999, Good morning, We offer for sale an automatic radial arm saw from the excellent Italian company OMGA model RN700 To begin with, some useful information about the machine: Njdpen Nyfysfx Adhedd * blade diameter in the range of 295 - 300 mm. * spindle 30 mm * saw motor 4.0 HP ( 2.9 kW ). * max dimensions of the cut element 80 x 700 mm * pneumatic pressures of the cut element - 2 pcs. * CNC controller for programming the parameters of the saw, including feed speed, width of cut * movement of the saw head on the stepper motor * own sawdust extraction * adjustment of cutting in three planes * very good technical and visual condition * safety guards and mushrooms for the safety of the saw operator. * 1999 year of production * overall dimensions 150 x 95 x 140 cm ( length x width x height ). * meets CE standards

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Ndjdpsvz Etmsfx Adhsd Total power requirement 9 kw

Condition: used, Year of construction: 2014, SECOND-HAND COPYING BAND SAW CNC CONTROL MZ UNIVERSAL 013 - CE RULES Nsdjwr Ek Sjpfx Adhsdd - The CNC universal is designed to handle any type of wood: solid wood boards with defects, laminated panels or other similar materials. - Versatility is the main feature of these machines which stand out for the possibility of operating in manual, semi-automatic or fully automatic cycle. - CNC bandsaw with blade twisting +/-90° - Roller clamp to keep and position the wood - Manual, semi-automatic, automatic cutting cycles - Easy to program and use - Motor Hp 7,5 - Wheel diam. 900 mm - FANUC CNC control - CE rules - Year 2014

Condition: new, Year of construction: 2024, functionality: fully functional, cutting range round steel at 90°: 650 mm, warranty duration: 12 months, empty load weight: 8,000 kg, Cutting range: Diameter : 650 mm, axh section 800x650 mm Main drive motor 7,5 kW. Belt drive unit reducer - inverter. Body of the machine tool Construction of thick-walled sheets welded and reinforced with steel sections to ensure high stability and durability of the base. In the body there are containers with oil and cooling emulsion. Receiving table at the working vise with dimensions 800x500. Arm guidance Vertical columns made of properly selected profile steel. Guiding of the arm - precision rolling guides with preload. Arm movement controlled by two ball screws mechanically connected to each other by reducers and servo motor. The machine will be equipped with a mechanism for hydraulic relief of the arm holding bolts to reduce the pressure on the ball screw nuts, resulting in longer service life. The use of the arm feed drive with ball screws provides constant control over the feed speed especially at minimum cutting speeds, setting the feed speed parameter from the control panel. The machine will be equipped with arm descent speed measurement displayed on the desktop and bend control. The belt guiding control (bend control) will be linked to the arm feed drive mechanism. When the belt deflects, the feed speed will be automatically corrected, after it returns to the correct value, the feed will automatically return to the original value. When the set value of the tape deviation is exceeded (bevel cutting), the machine will stop the cutting process and visually (indicator lamp) will notify the problem. Nedpevf Icfsfx Adhjdd Standard equipment Cutting arm guided on rolling guides Reducer - inverter Lifting and lowering of the cutting arm controlled by ball screws, Hydraulic clamping of working vice and feeding vice Double-half vise holding the material in front of and behind the cutting belt Bend Control Hydraulic tensioning of the cutting belt with compensation for its elongation; Feeding roller table on the body of the machine length of 1.5 mb Automatic feeder drive screw (single feeding up to 1000 mm) is only available in system with PLC and inverter Adjustment of clamping force of vices Roller receiver length 1.5 mb (receiving table) Feeding table length 3 mb with driven rollers equipped with vertical rollers on the input and output - controlled from the machine desktop (additionally equipped with a mobile desktop at the roller conveyor) Laser cutting line Chip extractor (directed to the right side) PLC with liquid crystal display; cutting belt speed measurement (NC) Full protection, complying with CE safety mark. Cooling system; Cutting belt; DTR

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m Njdpfefu Nbbex Adhedd For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Nodpfx Adjtufcdjhjdd

Condition: refurbished (used), Year of construction: 2007, Technical Description Ndodpewkdwuofx Adhod Machine for producing or regrinding carbide saw blade flanks - Option to install a 3-pallet loader Diameter: 80 to 800 CNC: 840DI SIEMENS CNC axes: Siemens Simodrive 611 - Oil mist extraction - Automatic blade measurement and grinding wheel compensation - Variable spindle speed - Integrated measuring system - Integrated modem for remote diagnostics and user assistance - Stable, vibration-reducing cast iron construction - Highly user-friendly and easy to program thanks to a new Windows-based user interface/system SOLD WITH 3-PALLET LOADER Options: Profile editor: Allows you to quickly and easily generate any tooth flank shape The machine will be completely rebuilt upon receipt of the order. Approximately 3-4 months

Condition: new, MEP TIGER 372 CNC LR 4.0 Item number TI372CNCLR motor power 4,0 kW belt opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Electro-mechanical vertical circular saw with semiautomatic function for the use of HSS saw blades to make precision cuts from 45° right to 60° left with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, for the same thickness of material Basic equipment: Nsdpfx Ajchkyrjdhsdd -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feeding (length 1000 mm) via recirculating ball screw with stepper motor and movable feeding vice -Vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush -The machine is designed for lift truck transport incl. tools and operating instructions Electrical equipment: -control panel -80 different cutting programs programmable -control light for operational readiness -Main safety switch -console for programming and control, LCD display with auto-diagnostics -LED check indicator on the control panel to check the machine functions -Emergency stop button -Speed changeover switch -Thermomagnetic protection -Undervoltage release -Switch handle protection class IP 55 -Low voltage system 24 volts -Electric coolant device for lubrication and cooling of the saw blade (attachment of a micro-spraying device possible) -Motor 4,0 kW - 400 Volt MEP TIGER 372 CNC LR 4.0 RC with automatic miter cutting Item number TI372CNC LR 4.0 RC motor power 4,0 kW bench opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description -Automatic electromechanical vertical circular saw for the use of HSS saw blades to perform serial cuts with automatic miter adjustment between -45° to +45° on steel. -Semi-automatic cycle to perform miter cuts between -45° and +60°. -with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, on the same material thickness. Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feed (length 1000 mm) via recirculating ball screw with stepping motor -movable feeding vice -vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush Electrical equipment: -control panel -80 different cutting speeds

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min Ndedpfsra Rrlox Adhsd weight of the machine ca. 1050 kg

Condition: ready for operation (used), Technical characteristics Blade diameter 450 mm Double left and right CN tilting 90° - 22/30° Ndedpfx Aoundgzsdhjd Stop ruller and entry and exit roller table Caractéristiques débitNumerical command Power and Motors Overall dimensions

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Nedpfx Asfm T Hbjdhjdd Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Njdpfxetufcaj Adhjdd

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Njdpfx Adjd Iipzehodd Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, saw blade diameter 130 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 100 mm capacity 45 degrees: flat 120 x 100 mm engine 3,3 / 4,4 KW 0 1400 / 2800 U/min weight of the machine ca. 1060 kg dimensions 2,5 x 1,8 x 1,85 m Njdpfx Ajhpktyjdhodd TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Nedpod Iinyefx Adhodd Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry