Used Coating Drum for sale (5,509)

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 2001 Working width 1300mm Hfedpfx Aowink Nohfsn Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum Hjdex R Svlepfx Ahfofn -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg

Condition: ready for operation (used), * Brand: FAM Hfedpfx Ahoywl Uhjfjn * Model: head drum (unused) * Beltwidth: 2000 mm * Roll lenght: 2200 mm, Ø 830 mm * Incl.: bearings and rubber liner

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Very good condition. Fully working. Hfodpfxjt S D Ume Ahfjn Available immediately.

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Hedpfouhvhpsx Ahfofn Electrical motor 75 kW

Condition: new, Year of construction: 2026, Drum magnet installed in a housing Magnet: Ferrite Drum diameter: 300 mm Drum length: 400 mm Entrainment elements: 4 pieces, 10 mm Gear motor: 0.25 kW / 400 V / 50 Hz Hjdpfx Aoznmunohfefn Rotation speed: 30 RPM Housing: made entirely of stainless steel With upper and lower parts: 1 inlet / 2 outlets With material limiting slide gate at the inlet Front panel removable

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Hfedpfx Ajzq Sqgohfen Without electrical installation and without control cabinet

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, ⚙️ STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding operations. Hfedpfjzuzyljx Ahfen The machine has undergone a complete retrofit by MIRA Retrofit, including the inspection and refurbishment of its main components, as well as a careful adjustment and fine-tuning process. The result is a machine that is ready for operation, with a high level of precision, reliability, and stability, and performance comparable to that of a new machine. Key specifications: 🔹 Distance between centers: 650 mm 🔹 Height between centers: 175 mm 🔹 Grinding: external and internal 🔹 Condition: complete retrofit – ready for operation 🔧 Inspection and fine-tuning All components have been carefully inspected and adjusted to ensure high geometric accuracy and reliable, stable operation. 📸 Photographs of our finished machine. 🚚 Available for immediate delivery. For more information, technical documentation, pricing, or any questions about the machine, please do not hesitate to contact us. MIRA Retrofit SA

Condition: excellent (used), functionality: fully functional, Stork | Battering Machine / Coating Machine Manufacturer: Stork Device Type: Battering Machine / Coating Machine Mesh belt width: 600 mm Hsdpfxoy Uav Us Ahfofn Belt material: Stainless steel Overall dimensions: 3000 × 1100 × 1730 mm Construction: Stainless steel (acid-resistant) This industrial coating machine from Stork is designed for the automatic and uniform application of liquid batters (e.g., pancake batter, tempura, slurry) onto food products. The device is a key component in production lines that manufacture products such as nuggets, cutlets, fish sticks, schnitzels, and various types of snacks and molded products. Thanks to its universal mesh belt with a working width of up to 600 mm, the machine ensures high throughput and works perfectly with industrial formers, dry battering machines, and frying tunnels (fryers). Key features: - Efficient coating system: A special design allows for precise coverage of the product with liquid batter from all sides (from below through immersion, from above through a liquid curtain), guaranteeing perfect consistency and excellent adhesion for subsequent dry battering. - System for removing excess liquid: The machine is equipped with a mechanism (e.g., air blast or vibration system) that effectively removes excess batter from the product, preventing drips and saving raw materials. - Parameter adjustment: The ability to adjust the belt speed makes it easy to synchronize the machine with the rest of the production line.

Condition: used, power: 60 kW (81.58 HP), overall weight: 11,000 kg, operation weight: 7,280 kg, Year of construction: 2005, EXCELLENT CONDITION Hfedpfx Aey Hiz Dohfsn

Year of construction: 2020, condition: excellent (used), functionality: fully functional, EIMA FOOD PROCESSING MACHINES | Separator / Rotary drum screener Hfodpfx Aszczt Ashfon Manufacturer: EIMA Engineering Serial number: 2050039 Year of manufacture: 2020 Drum diameter: 1000 mm Drum length: 2400 mm Dimensions: 3200 x 1600 x 2850 mm Professional, large-capacity rotary drum separator (rotating screen) from the German leader in process engineering, EIMA Engineering. This unit is a key component in processing lines within the fruit and vegetable processing sector. The machine is designed for continuous, mechanical separation of solid fractions from liquids, sorting raw materials by size, cleaning process water from post-production residues, or thoroughly draining products after washing and blanching. The heart of the unit is a robust, perforated drum made of the highest quality stainless steel and acid-resistant steel, with an impressive diameter of 1000 mm and a working length of up to 2400 mm. This working geometry ensures extremely high surface and hourly throughput, preventing blockages even with rapid input of raw materials. Operation in a rotary system guarantees that the material being processed is constantly and gently mixed, optimizing the draining and separation process without the risk of mechanical damage to delicate food products.

Condition: used, Year of construction: 2023, Operational machines! Ask for additional information! Hodpfswctnaox Ahfefn

Condition: used, Drum heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, heating drum -Handover: in the current condition as viewed -Connection cable: damaged, see photos -Drum heater: Type designation 1082 105 BHT 932 07/20 -Shaft: Ø 40 x 40 mm -Dimensions: Ø 180 x 760 mm Hfedpfxexm Rpte Ahfjn -Weight: 49 kg

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology Hsdpfxovugf Ro Ahfofn The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Hjdpfxoyg H Dhs Ahfofn 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 167 kg, total length: 1,400 mm, Applications & Customer Benefits: The ASCO® Drum Extension Compact boosts screening capacity, delivering finer separation, fewer misgrades, and higher overall yield. Ideal for industries needing efficient material screening with extended drum performance. Key Features: • Increased usable screen area (3.3 m²) for higher throughput • Flexible mesh sizes (4-100 mm) and shapes for diverse materials • Optimized material processing for improved separation quality • Robust, long-life design for reliable operation Tech Highlights Hfsdpsxf E I Usfx Ahfjn Ø 1.3 mm · L 1.4 m · Qmax 15 m³/h · Rotation 5-20 rpm · Usable L 0,9 m · Usable screen area 3,3 m² · Mesh size 4 - 100 mm · Weight 167 kg · Mesh shape: square, round, triangular, rhombic, elliptical,...

Condition: good (used), Grinding drum, deflection drum, belt sander, belt sander, drum sander, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 150 mm -Drum: Ø 250 mm -Hole: Ø 45 mm -Number: 4 drums available Price: per piece -Dimensions: Ø 250 x 150 mm Hodpfx Ahovxgvkofsfn -Weight: 14.0 kg/pc.

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 205 mm -Drum: Ø 200 mm -Hole: Ø 70 x 155 mm -Bolt circle: Ø 90 mm M8 -Quantity: 1x drum available -Dimensions: Ø 200 x 205 mm Hfjdpfovxg Dujx Ahfon -Weight: 9.9 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 155 mm Hfedpfx Aovxg Itjhfon -Drum: Ø 200 mm -Hole: Ø 70 x 105 mm -Bolt circle: Ø 90 mm M8 -Quantity: 1x drum available -Dimensions: Ø 200 x 155 mm -Weight: 8.3 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm -Drum: Ø 150 mm -Hole: Ø 25 x 200 mm -Number: 6x drums available -Price: per piece -Dimensions: Ø 150 x 200 mm -Weight: 6.8 kg/piece Hfjdpfxsvxg U Hs Ahfon

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm -Drum: Ø 100 mm -Hole: Ø 34 x 160 mm -Quantity: 1x drum available -Dimensions:Ø 100 x 200 mm Hsdpfxovxpx Uo Ahfsfn -Weight: 3.1 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Hfedpfovxp Hxex Ahfjn -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 118 mm -Hole: Ø 30 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 118 x 385 mm -Weight: 11.3 kg/piece

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 220 mm -Drum: Ø 320 mm -Hole: Ø 30 x 130 mm -Number: 3x drum available -Price: per piece -Dimensions: Ø 320 x 220 mm -Weight: 19.0 kg/piece Hfodpfjvxqhwjx Ahfjn

Condition: good (used), Grinding drum, deflection drum, belt sander, belt sander, drum sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 300 mm -Drum: Ø 300 mm -Capacity: Ø 40 x 300 mm Hfedpfx Aovxqlcehfjn -Quantity: 1 drum available -Dimensions: Ø 300 x 300 mm -Weight: 23 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 530 mm -Drum: Ø 300 mm -Hole: Ø 77 x 500 mm -Quantity: 1x drum available -Dimensions:Ø 300 x 530 mm -Weight: 54.5 kg Hsdevxqmaepfx Ahfsfn