Used Curtain Coating for sale (4,276)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Brush air Apache 15 impregnation line, year 2016 (USED, fully operational, taken from the customer from whom it was acquired). Complete with automatic loading and unloading conveyors. Hodsvy Enhepfx Airsw

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Hodpfxozqur Hs Airjw Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications Hjdpfsz Rnu Tex Airow • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Hedsxa H Ewjpfx Airew (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: Hodpswzl Hxefx Airjw After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! Hjdpfx Aiewfhu Herow ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. Hsdewzmcbspfx Airow • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, overall weight: 36,000 kg, next inspection (TÜV): 09/2026, loading space length: 13,830 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Curtain Master MEGA White aluminum Dimensions and Weights Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between posts 2480 mm Inner width between longitudinal beams (without lifting roof) 2480 mm Lateral loading height with lifting roof and inner height 2850, 2785 mm Axle distance 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance from kingpin to 1st axle 6390 mm Number of Euro pallets 34 pcs Technically permissible gross weight (administrative) 36000 kg Technically permissible gross weight 42000 kg Technically permissible axle load (administrative) 8000 kg Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Manufacturer designation NS3K nd Accuracy +/- 4% nd Unladen weight 6560 kg TECHNICAL DATA Chassis Lamp bracket made of steel 371 mm Pallet stop with lashing eyes Wielton side impact protection, white solid filling Rear underrun protection, fixed Steel rear underrun protection Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Perimeter frame with continuous lashing points for securing the load, SAFETY LOCK system, 50 to 67 per side depending on the model Steel buffer at the rear Axes and Suspension Number of axles 3 Rigid axles Saddle height 950 BPW disc axles 3x 9000 kg, 19.5 ECO PLUS, 3 clamps, BPW, ET=120 1st lift axle Support legs 2-speed geared support legs, full load (BPW Gen2 FL/SAF Hercules) Fenders PVC fenders, shell, 2 front, 6 rear Rims 6x steel rim 19.5-14 ET-120 Tires 6x ALL-ROAD Premium tires 445/45/R19.5 (Goodyear) Other chassis equipment Two wedges with mounting Customs rope/tarpaulin rope on the front wall (no customs seal) 1 extendable rear ladder 2 identification plates on the rear panel 565x200 ECE-R70 Body Inner height 2950 Insert strips - 4 rows 1st row, aluminum overlay strips, H=100 mm, 8 pcs Sliding roof Edscha HYBRYD (0, +50, +100, +150) and 450 for loading, roof can be moved forward and backward independently of the side tarpaulins Side tarpaulins with 24 tarpaulin tensioners Aluminum front wall Front wall impact protection (metal plate) H=1500 mm 2nd row, aluminum overlay strips, H=100 mm, 8 pcs 3rd row, aluminum overlay strips, H=100 mm, 8 pcs 4th row, aluminum overlay strips, H=100 mm, 8 pcs Tarpaulin quick tensioner at the front Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Tarpaulin tensioner with additional locking mechanism Sliding tarpaulin that can be opened on both sides EDSCHA HYBRID Rear wall as an aluminum double-wing door Braking system/pneumatics Braking system Wabco with Basic Modulator with RSS/RSP Steel air reservoir Chassis painting Chassis painting RAL 7021 (black gray) Hedpfx Aozx Iqroirjw KTL coating Tarpaulin color Side tarpaulin color Polplan 018 RAL 9006 (silver) Electrical system 2x7-pole + 1x15-pole with EBS connection, without connection cables to the central unit Lighting LED Aspöck-EUROPOINT III with flashing side marker lights Additional systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Version DC 9.5 design Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Designation in German Certificates/Homologation Certificate f

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14-35-15-10-02, The device is made of AISI 304 stainless steel. It has been lightly used and stored in a warm, dry area. The device is currently not in use, but it can be started after prior arrangement. Technical documentation, including a CE declaration, is available. - Total drum length: approximately 3100 mm. - Total drum height: approximately 2050 mm. - Inclination angle: 0 to -6º - Maximum drum diameter: 800 mm. - Motor rotational speed: 1.375 rpm - Gearbox ratio: 25.00 - Service factor: 2.2 - Rated motor power: 0.750 kW Hsdj Af Ihcspfx Airew - Motor supply voltage: 230/400 V Additional information can be found in the attached photos.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Curtain ironing table with preheated rotating surface and steam extraction The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Hjdpfx Aj Abar Reirsw Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: used, mileage: 7,71,939 km, power: 160 kW (217.54 HP), first registration: 11/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 6,100 mm, loading space width: 2,490 mm, loading space height: 2,730 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, parking heater, soot filter, tail-lift, Body/Superstructure: * Flatbed/Curtain-sided body * Internal dimensions: 6,100 mm x 2,490 mm x 2,730 mm * Roof fairing, * MBB Palfinger tail lift, 1,000 kg * Sliding curtains on the left and right, * Storage compartment Equipment: * Cab: L (long), * 1 bed, Hjdpfxozm Dlnj Airew * Air conditioning, * Auxiliary heater (air). * Roof hatch (steel), * Heat-insulating glazing, * Sun visor * Manual gearbox, 6-speed - Type: G 85-6, * Storage compartment on the engine tunnel, * Trailer hitch with ball coupling * Fuel tank: 180 liters, plastic, * Driver's seat: Comfort suspension seat, * Reinforced rear axle stabilizer, Technology: * MB audio system, * Bluetooth, * Exterior mirrors, electrically adjustable and heated, * Power windows, * Cruise control, * Toll system preparation, Safety/Environment: * ABS/ASR * Engine brake with constant throttle, * Emission standard EURO 5, * Engine start/stop system, Other: * 1 previous owner, * Originally delivered in Germany, * Engine: 4.8 liters - 160 kW diesel (OM 924 LA), * Wheelbase: 4820 mm, * Permissible total weight: 7.49 t * Weight reduction from 9.50 t to 7.49 t without technical modifications, Since 1972, your reliable partner for everything related to cars/commercial vehicles in 28832 Achim, near the Bremen interchange. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare a customized offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. Hodpfj Af I Hdex Airow - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: used, mileage: 2,05,062 km, power: 115 kW (156.36 HP), first registration: 05/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,050 mm, total width: 2,550 mm, total height: 3,260 mm, loading space volume: 28 m³, loading space length: 5,160 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2011, Equipment: ABS, tail-lift, M-Benz Atego 816L with Maise body VIN: 028937 Chassis / Components: * Wheelbase: 3,620 mm * Leaf / Air suspension * Tires: 235/75 R17.5 * Remaining tread: Front ~80/50%, Rear ~60/20% * Diesel tank // Plastic, 125 L * 1 x Ad-Blue tank * Tail lift Dautel DL 1000L, year of manufacture 2011, load capacity 1,000 kg * Fifth wheel coupling Cab: * Classic Space S * Storage compartment above the engine tunnel * 2 seats Hjdpfo Agdg Ajx Airsw * Radio CD * Roof hatch Body: * Maise flatbed // with side curtains * Cargo area: 5.16 m x 2.48 m x 2.15 m, approx. 28 m³ * Aluminum slats * Tie-down points * Tail lift Dautel DL 1000L, 1,000 kg load capacity, year of manufacture 2011 Engine / Transmission: * 156 hp / 115 kW // 4,249 ccm // Euro 5 * Manual transmission, 6 gears * Engine brake * Differential lock Weights: * Gross vehicle weight: 7,490 kg * Unladen weight: 5,190 kg * Payload: 2,300 kg Other: * 1 previous owner * German vehicle * Valid MOT (TÜV) ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sales and errors are reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and seriousness. As we greatly value customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / Export license plates We will gladly assist you in obtaining export / short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, functionality: fully functional, inner dimension length: 3,000 mm, Powder coating line for sale – 3 m gas-fired oven I am offering for sale a powder coating line complete with equipment for surface preparation, drying, and powder coating of parts. The set includes: a 3 m long gas-fired oven, an open powder coating booth, a suspended conveyor system, 3 tanks for surface preparation, a tank-type dryer, a hoist above the tanks, a DEMI station for water demineralization. The powder coating line is located in Slovakia, where it can be inspected after prior arrangement. We offer assistance with relocating the equipment to a new location. Hjdpfx Aez Uxtzeirsw Interested parties are invited to contact me via private message or by phone. 3 m gas-fired oven, open powder coating booth, suspended conveyor, 3 tanks for surface preparation, tank-type dryer, hoist above the tanks, and DEMI station.

Condition: used, mileage: 4,48,900 km, power: 130 kW (176.75 HP), first registration: 12/2016, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, emission class: euro6, total length: 8,150 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, MERCEDES BENZ ATEGO 818 – STAND-ALONE HEATER – 1.5 T TAILGATE LIFTER – A/C ----VEHICLE HISTORY 1ST OWNER GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Vehicle Data* Mercedes-Benz Atego * Type 967PKX2 * Vehicle Class N2 * First Registration 12/29/2016 * VIN WDB96702210100836 * 448,900 km * 9,250 Operating Hours * 2 Axles Engine & Transmission* Diesel Engine * 4-Cylinder Inline Engine * 5,132 cm³ Displacement * 130 kW / 177 hp * Euro VI * Mechanically Automated Transmission * Maximum Speed 90 km/h Weights & Dimensions* Permissible Total Weight 8,600 kg * Weight in Running Order 4,013 kg * Technically Permissible Total Weight of Vehicle Combination 12,100 kg * Wheelbase 4,220 mm * Maximum Permissible Length 7,779 mm * Maximum Permissible Width 2,600 mm * Maximum Rear Overhang 2,179 mm Axle 1* Tire Size 235/75 R22.5 * Leaf Spring Suspension Axle 2* Tire Size 235/75 R17.5 * Twin Tires * Air Suspension Body & Tailgate Lifter* Tarp and Bows Hodpfj Abm I Sjx Airow * Side Curtains * Bär Tailgate Lifter * 1,500 kg Load Capacity Comfort & Interior* Heated Seats * Electric Windows * Heated Side Mirrors * Multifunction Steering Wheel * Leather Steering Wheel * Manual Roof Hatch Assistance & Safety* ACC / Adaptive Cruise Control * Distance Warning * Lane Keeping Assist * Hill Start Assist * Speed Limiter * Rear View Camera Navigation & Telematics* FleetBoard * DispoPilot * Navigation System ----EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT OF MIN. €500 – €2,000 FOR SALES IN EU AND NON-EU COUNTRIES, A DEPOSIT OF AT LEAST €500.00 / €1,000.00 WILL BE CHARGED. EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (APPROVED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS PLATES AS WELL AS 15 DAYS AUSTRIAN PLATES ARE POSSIBLE. VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGE, ERRORS AND PRIOR SALE.

Condition: used, Year of construction: 2008, CEFLA FINISHING EASY 2000 DUO D Automatic Spray Coating Machine - Manufacturer: Cefla - Model: EASY-DUO D - Year of manufacture: 2008 - Working width: 1,300 mm - Operator side: left - Price: machine has not been overhauled (Overhaul available upon request) Hedpfs Agvccox Airsw - Duo-style spray gun drive - Dry extraction - Exhaust air capacity: 12,000 m³/h - Belt conveyor system - Feed speed: continuously adjustable ~ 2–8 m/min - Belt cleaning via roller cleaning system - With paint recovery - Paint circuits installed: 2 - Number of spray guns installed: 4 (Up to 8 spray guns can be installed as an option) - Height-adjustable spray guns - Number of paint pumps: 0 - Supply air filter panel - Explosion-proof design - Suitable for solvent-based paints - Suitable for water-based paints - Used machine, in good condition - Length: 4,867 mm - Width: 3,708 mm - Height: 2,780 mm - Total power consumption: 18 kW - Location: in stock - Voltage fluctuations: max. +/- 5% _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training . Upon request, we also offer regular maintenance and servicing of the machine. For more information, please feel free to contact us!

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, RENT-TO-OWN * LEASING * FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8 8-speed automatic transmission, 3.0 diesel, 176 hp Options / Equipment: 05925 ? Additional, adjustable, and switchable speed limiter 07629 ? Without acoustic warning signal 06064 ? Reinforced double rear leaf springs for S? models 73024 ? Exterior mirrors on extension arms for body width 2.35 m 00344 ? Rear view camera 07820 ? Ball head tow hitch D?50 06552 ? Trailer socket 12 V, 13-pin 00821 ? Digital tachograph 4.1 00265 ? Comfort passenger seat with adjustable lumbar support ----STYLE PACKAGE 3.5 S: 79336 ? Daily grille with chrome strips 01553 ? Emblems in Gun Metal color 02308 ? Daily aluminum rims 72625 ? Full LED lighting (daytime running lights, low beam and high beam) ----COMFORT PLUS PACKAGE: 00259 ? Sprung-mounted comfort driver's seat Hjdpfx Aszy T N Neirow 01611 ? USB ports A + C on driver and passenger side 75082 ? Fixed 2-seat passenger bench with folding table, 3-point seat belts 07196 ? Air conditioning compressor 170 cm³ 01605 ? IVECO NAVI MY infotainment system with 10-inch display 14522 ? Adaptive cruise control (ACC) with radar sensor 06650 ? Ventilation and heating system with automatic air conditioning 79297 ? Fully upholstered headrests with memory foam, Daily logo ----BODY: Approximate interior dimensions: Length x Width x Height (mm): 4,200 x 2,200 x 2,300 mm ? Height flush with the cab Tarp color: Silver Base vehicle: Iveco Daily 35S18, single cab, wheelbase 4,100 mm ----Description of the MaxTrans aluminum body standard: * Auxiliary frame profile made of aluminum 108 mm * Crossbeam profile made of aluminum 70 mm * All-around frame profile made of anodized aluminum 70 mm * Floor made of non-slip melamine resin-coated board, 15 mm * Front/rear corner posts fixed, aluminum 133 mm, black anodized * Front wall 400 mm anodized + additional plywood panel 1,250 x 15 mm * One-piece side wall 400 mm anodized, closed with cassette-type side wall locks * Closure of the body with one-piece rear wall 400 mm including step on the rear wall * Steel forged, rust-free (non-staining) hinges for side and rear walls * Partition of the side walls and removable steel center post from body length 3,800 mm * One pair of mobile lashing points per meter of body length, mounted in the all-around frame profile * Aluminum tarp frame * Four rows of aluminum roof rails * Three rows of pockets for tarp slats with wooden slats * Lighting according to road traffic regulations * Complete set of fenders with mud flaps * Translucent roof (skylight) * LED lighting in the cargo area * Tarp with buckle closure ----Additional equipment: * Frame extension required for this body length * Spojtrak XL sleeper cab in white with standard wind deflectors - two beds * Curtains in the cab * Independent WEBASTO stand-alone heater with potentiometer control and warm air distribution in the sleeping area * One-sided side wall tarp (curtainsider) with steel tensioner - left side * Toolbox * Underrun protection / pedal protection over 2,000 mm length * Adaptation of the factory-installed tow hitch to the body length Our special service for you: * Maintained according to service schedule at authorized dealers and certified workshops * Winter tires available at an extra cost * Warranty insurance up to max. 36 months possible for an extra cost * We will take your

Condition: used, mileage: 19,819 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, overall weight: 5,990 kg, color: white, gearing type: mechanical, emission class: euro3, number of seats: 3, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 2,100 mm, Equipment: ABS, soot filter, tail-lift, Vario 614 D Doka flatbed with original 19,819 km Hsdpfjz I Hd Hsx Airjw Body/Superstructure: * Tarp/curtain superstructure, * Dimensions i.L. 3,100 mm x 2,180 mm x 2,100 mm, * Through-loading function with bulkhead, * Diamond-plate loading floor, * Tailgate, load capacity 1,000 kg, Equipment: * Body/Superstructure: Flatbed, double cab, * Rockinger pintle hitch, * Rear door, double cab, * Sweden flap, cab, * Driver's seat with hydraulic suspension, * Double passenger seat, * No seats in the Doka area, Technology: * Exterior mirrors, electrically adjustable, * Power windows, * Rotating beacons, Safety/Environment: * Airbag, driver's side, * Stabilizer, rear axle, reinforced, * Stabilizer, front axle, reinforced, * Emission standard Euro 3 * Retrofitting of DPF "green" environmental badge, Other: * Previous owner: "Energy Supply Company" * German original delivery, * Suspension: Leaf spring / leaf spring, * Engine 4.3 L - 100 kW Diesel (OM 904 LA), * Wheelbase 3700 mm, * Payload 1.73 t according to ZLB, * Permissible total weight 5.99 t, * New technical inspection (TÜV) upon handover Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim, at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are happy to accept your trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Hodpjzg Epuofx Airow Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. Hjdpfjz Dhk Hsx Airew If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: new, warranty duration: 12 months, POWDER COATING BOOTH WITH 1 OR 2 FILTERS | PROMOTIONAL OFFER VALID UNTIL 31.12.2026 Directly from the manufacturer | Royal Gold Industries Kft. Are you looking for a reliable powder coating booth for your business? We offer two models at attractive promotional prices directly from the manufacturer. Take advantage of our end-of-year promotion until December 31, 2026! ⚙️ Variant 1: Powder coating booth with 1 filter Promotional price: €4,999.00 net Technical specifications: - 1 filter - 1 fan - Conventional control system - Manual pneumatic filter cleaning - 1 × LED light ⚙️ Variant 2: Powder coating booth with 2 filters Hedj Agnw Ejpfx Airsw Promotional price: €5,999.00 net Technical specifications: - 2 filters - 2 fans - Conventional control system - Manual pneumatic filter cleaning - 1 × LED light Delivery and payment terms - Delivery time: approx. 3–4 weeks - Payment: 50% deposit, remaining amount before delivery - Warranty: 12 months ✅ Your advantages - Directly from the manufacturer, without intermediaries - Attractive manufacturer prices - Two models to choose from - Personal consultation - Delivery to Germany and other European countries upon request Offer valid only until 31.12.2026! Secure your powder coating booth at the promotional price now. Whether a compact model with one filter or a larger model with two filters, we will be happy to advise you on the selection. Inquire now via classified ads! All prices are net, plus statutory sales tax where applicable. Dimensions and other technical details available upon request.

Condition: like new (used), mileage: 2,70,000 km, fuel type: diesel, Year of construction: 2010, MERCEDES SPRINTER, B license required, year 2010, Euro 6D emission standard, with a 4.60 x 2.30 meter box body with a liftgate. 2.2 diesel engine, 160 hp. Automatic transmission, air conditioning, steering wheel controls. 270,000 km. 1-year warranty. Financing or leasing options available on site. Hjdpfoz Hbamjx Airjw

Condition: used, first registration: 07/2013, Schmitz Cargobull SCB S3T MEGA curtain-sided semi-trailer, tautliner, lift axle, raising roof Hsdpjzmf Haefx Airjw • ABS • EBS • XL-12642 load securing certificate • EDSCHA tarpaulin system • Rear portal doors • Internal dimensions: 13,620 x 2,490 x 2,970 mm (L x W x H) • Mechanical raising roof • Permissible gross vehicle weight: 36,000 kg / 39,000 kg technically possible • Tare weight: 6,904 kg • Disc brakes • Lift axle • 3 x air-suspended SCHMITZ axles • Lifting/lowering system • Tire size: 435/50 R19.5 • Tire tread: 4/4, 5/5, 5/6 - German semi-trailer! - TÜV/inspection on request and for an additional charge: new! Subject to errors and prior sale! = Further information = Year of construction: 2013 Tare weight: 6,904 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Hodpoyw Nxkefx Airsw Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. Hedpfx Aszxh E Aoirjw The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.