6
sheet width: 1500 mm
plate thickness: 1 mm
no. of strokes: Hub/min
control: Ducter 1500
total power requirement: 2,0 kW
CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears
Shears:
- cutting length 1500 mm
- sheet thickness approx. 1.0 mm
- operation via control panel and foot control
- manual operation / automatic
- table size 1530 x 400 mm
- Rear end stop: adjustment range 1300 mm
- Size: LxWxH: 1600 x 2.0 x 1350 mm
Straightening system:
- stand width 1585mm
- Tab...
7
foil width 1400 mm
max. speed 250 m/min
Diameter of the holes 0,3-2,8
temperature 400 °C
heating capacity 37 kW
Control Touchscreen
Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen)
Machine is new, used less than 100 hours.
HOT MICROPERFORATORS = With the hot needle technique, the hole is created by
the melting of the material caused by heated needles.
The pin cylinders are mounted on a perforation roller. They are heated to a
temperature of 400°C by special l...
15
Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB
Position 2: Double Edgebanders BIESSE - RBO-STREAM SB
Position 3: Panel Turning Device BIESSE - RBO-STREAM SB
Cayreum3q0
Position 4: Double Edgebanders BIESSE - RBO-STREAM SB
Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB
Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB
Position 7: Panel Turning Device BIESSE - RBO-STREAM SB
Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB
7
Cutting line
Polar 155 ED
Year: 1998
Consisting of
Paper jogger
Polar R-4
Year: 2000
Paper jogger
Polar RA-7S
Year: 2007
Description
- Air removal roller
Guillotine
Polar 155 ED
Year: 1998
Description
- Colour monitor
- Side table on the left with air
- Side table on the right with air
Cavjysrmf8
- Cutting table with air
- Air blower
- Photocell protection
- Number of knives: 2
Unloading system
Polar TR 1ER 185-7S
Year: 1998
Description
- On the right side of the guillotine
sheet width / mm
plate thickness / mm
no. of strokes / Hub/min
total power requirement / kW
weight of the machine ca. / t
dimensions of the machine ca. / m
P83vi7
DESCRIPTION
Automatic loading and unloading system
Automatic cutting gap adjustment
Flying guillotine shears
Air float board stacker
Hydraulic & Mechanic Precision Corrective Leveler Configurations
Max strength
Slight trace: 4 mm
Middle track: 6 mm
Heavy track: 25 mm
Max width
Light track: 2400 mm
Middle track: 2400 mm
Heavy tr...
Year of manufacture: 2003
Speed: 350 m/min
Planner: Waco Maxi
Ccs0swh9ug
Waco Maxi/Almab Planing line:
- Year fo manufacture: 2003
- Speed: 350 m/min
- Planner: Waco Maxi
- Second class packing
- Board pack press
- Strapping of board packages
- Lengthening of boards
- Wrapping board packages in film
- Packers with liners with automatic liner stacking.
- Collection of spacers
- Board parcel transport system
It is possible to split the line.
The line also has storage pockets 6 gb, with packaging a...
4
material thickness 0,5 - 3,0 mm
3,0 - 5,5 to.
decoiler
Bftze7vs2r
Bodijn weighing line in combination with Ilapak vertical bagger.
Complete A-Z weighing and packing line from 2017.
Very well build, fully stainless steel.
Line consisting of;
- Infeed belt with sophisticated product sensor.
- Vibratory feeder, controlled by the multi-head weigher
Cbjjhe7zlt
- Installed on a separate platform
- 14 heads dimple plate multi-head weigher.
- Installed on a platform with racks for cleaning with an additional set of buckets.
- With collection gate with reject option...
15
Position 1: Panel Feeding and Loading IMA-COMBIMA/II/650/A/R3
Hrfl8s0lg
Position 2: Double Edgebanders IMA-COMBIMA/II/650/A/R3
Position 3: Panel Turning Device IMA-COMBIMA/II/650/A/R3
Position 4: Double Edgebanders IMA-COMBIMA/II/650/A/R3
Position 5: Panel Turning Device IMA-COMBIMA/II/650/A/R3
Position 6: Panel Stacking and Offloading IMA-COMBIMA/II/650/A/R3
6
Hard cover book line
Kolbus BF 511
Year: 2005
For rounding, gluing, backlining, headbanding, pressing and casing-in of book blocks in hard, flexible or plastic cases and subsequently pressing and joint-forming of books.
Description:
- Co-Pilot with touchscreen
- Book measuring table
- Infeed conveyor
- Book block infeed
- Starfeeder
- Rounding and backing station
- Glue unit
- Gauzing station
- Book mark gluing
Ccjudp793d
- Glue unit
- Head and tail banding station
- Pressing station
- Casing-in...
sheet width 1600 mm
plate thickness 6 - 20 mm
no. of strokes 1-15 Hub/min
Number of Straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
coil weight 35 t
total power requirement 115 kW
Bt3rxen8yt
weight of the machine ca. 85 t
dimensions of the machine ca. 25 x 5 x 3 m
Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20
and a Steiner shearing machine with 1800 x 25 mm capacity. Line works
automatically.
Manufacturer: Nord Automation OY
Year of manufacture: 1991
Pockets: 25
Qqtqj
Speed: 120 m/min
Dry board sorting line Nord Automation OY
- 25 pockets
- Year of manufacture: 1991
- Speed 120 m/min
- Boards till 6 m
- Stacker with spacers
- Board pack handling station
- Wrapping board packages in film
- Trimming the ends of the boards
7
Technical characteristics
High capacity lifting table 7000 kg (4000 x 1500 mm) allowing the stack to be brought to the right height
Set of rollers allowing the passage of the pieces
Width guide to determine the splitting
Flying saw of 110 mm, 30 kW, width of bandage 100 mm
Conveyor with belt conveyor
Waste separator
Control cabinet
Inclined motorized roller conveyor
Set of transfer rollers to return
Return belt to the operator
Ccoypj73xu
Ejector
4 strands deck for the evacuation...
15
Dzolv3
15
Position 1: Ovens BARBERAN-.
Position 2: Roller Spreaders BARBERAN-.
Position 3: Ovens BARBERAN-.
Position 4: Roller Spreaders BARBERAN-.
Position 5: Ovens BARBERAN-.
B8vdi8kpmh
Position 6: Ovens BARBERAN-.
Position 7: Roller Spreaders BARBERAN-.
Position 8: Brushing Machines BARBERAN-.
8
Cutting line
Polar 176 EMC - Monitor
Year: 1994
Consisting of
Pile lift
Polar LW2000-W-7S
Year: 2000
Description
- With steelplate
Paper jogger
Polar RAB-7S-VA
Year: 1994
Description
- Air removal roller
- Delivery to the left and right
Rear loading system
Qrtfx
Guillotine
Polar 176 EMC-Monitor
Year: 1994
Description
- Monitor
- Automatic setting
- Side table on the left with air
- Side table on the right with air
- Air blower
- Photocell protection
- Number of knives: 2
Unloading system
Polar T...
sheet width / mm
plate thickness / mm
no. of strokes / Hub/min
total power requirement / kW
weight of the machine ca. / t
dimensions of the machine ca. / m
DESCRIPTION
Automatic loading and unloading system
Automatic cutting gap adjustment
Flying guillotine shears
Air float board stacker
Hydraulic & Mechanic Precision Corrective Leveler Configurations
Max strength
Slight trace: 4 mm
Middle track: 6 mm
Heavy track: 25 mm
Max width
Bt8w7x9nm0
Light track: 2400 mm
Middle track: 2400 mm
Heav...
Manufacturer: Leadermac
Year of manufacture: 2006
Speed: 100 m/min
Planing line Leadermac 7 head, complete with all electric and control system.
- 4-chain rail conveyor
- Tilt hoist
- Spacer belt conveyor
- Spacer collector conveyor
Qqmat
- Board separator
- Infeed conveyor
- Planer Leadermac LMC-623SP 2006, 7 heads
- Output conveyor
- Chain conveyor separating with end saw
- Board stacker
- Roller conveyor for ready board packages
- Dropping the waste board
- Belt conveyor
- Board pocket for w...
sheet width 1600 mm
plate thickness 6 - 20 mm
no. of strokes 1-15 Hub/min
Number of Straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
coil weight 25 t
coil external diameter 2000 mm
coil internal diameter 360- 920 mm
Bhjg9aq23x
coil width 2000 mm
total power requirement 115 kW
weight of the machine ca. 85 t
Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20
and a Steiner shearing machine with 1800 x 25 mm ...
11
Technical characteristics
4 chains introduction conveyor
3 chains dismantler
High performance edger SPEEDFLEX : (Ref C2985)
Entry table with free rollers
Retractable guide aligned to the fixed blade
Horizontal roller press
1 fixed blade, 3 mobile blades controlled by MUDATA 3 axis division.
Lasers
Sawing "downstream".
Feed speed : 0-100m/mn
Characteristics :
Blade diameter: 400 mm.
Rotation speed : 3750 rpm.
Blade bore: 85 mm.
Blade shaft diameter: 65 mm with counter beari...
15
Position 1: CNC Machine Centres With Pod And Rail IMA-BIMA/P/780/V/2H/D/UF
J7ujt00z
Position 2: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA-BIMA/P/780/V/2H/D/UF
7
Cutting line
Polar 137 EMC-monitor
Year: 1988
Consisting of
Pile lift
Polar L600-3
Description
- Photocel control
Ffrrxlxp
- With lifting forks
Paper jogger
Zöll 701
Guillotine
Polar 137 EMC-monitor
Year: 1988
Description
- Monitor
- Side table on the right with air
- Cutting table with air
- Air blower
- Photocell protection
- Number of knives: 2
Unloading system
Polar TREL 100/3
Description
- On the left side of the guillotine
Manufacturer: Weinig
Model: H22B
Qqixt
Max. board length: 6.20 m
Complete Weinig/Fischer planing line for max 6,20 m board length.
Feed
- 3-Support pack chain,
- Lift and tilt hoist,
- Gradding station,
- Weinig flat chain feeder,
- Weinig hydr. driven accelerator,
- Weinig hydromat H22B / 8-HD hydr. feed to max 90 m/min,
- Grading station 3 m long,
- Fischer SFV shrink foil packing machine for 1 colour,
- Weinig stacker 1200 x 1200 mm with 3 x stick cassets,
- Board lift table,
- Pack chain,
- ...
7
Technical characteristics
Varnishing line composed of :
A roller varnishing machine BARBERAN BRB 600 :
Application of base and finish
For heavy weight application (bottom 50 gr / finish 30gr)
Ccb7prnkms
Roller application system allowing to have no beading on the edges
A BARBERAN HOK 6/1 drying tunnel:
UV curing
1 lamp 80w/cm
Power regulator (20% to 100 %) Power and Motors
Pluging: Three-phased Overall dimensions
15
Position 1: Roller Conveyors STEFANI-EVOLUTION SB ONE
Bgblbwwe
Position 2: Single Edgebanders STEFANI-EVOLUTION SB ONE
Position 3: Roller Conveyors STEFANI-EVOLUTION SB ONE
Position 4: Single Edgebanders STEFANI-EVOLUTION SB ONE
Position 5: Roller Conveyors STEFANI-EVOLUTION SB ONE
7
Cutting line
Wohlenberg 155
Year: 1999
Consisting of
Paper jogger
Baumann BSB 6L
Description
- Air removal roller
- Delivery to the left and right
Rear loading system
Guillotine
Wohlenberg 155
Year: 1999
Description
- Colour monitor
- Side table on the left with air
- Side table on the right with air
- Cutting table with air
- Photocell protection
- Number of knives: 1
B7fhh0mits
Unloading system
Polar TR EL 100 - 6
Year: 1991
Description
- On the left side of the guillotine
5
Ingvar Persson log sorting line with 2x10 pockets.
Ikkig7f
Ingvar Persson log sorting line is an ideal solution for preparing logs for sawmill cutting. The line is designed to guarantee the most productivity and can be fed with different dimension timber or long timber.
4
Technical characteristics
Mobile gantry 9 nailers for automatic, semi-automatic and manual cycles
2 nailing zones 1200 x 1800 mm
Lifting bar at the end of the cycle
3 roller nailers in the lower part
6 roller nailers in the upper part
Control panel on the gantry
60 pallets/hour Power and Motors
Voltage: 380 V Pluging: Three-phased Overall dimensions
Ccarfrsz93
Length: 6500 mm Width: 2400 mm Height: 2700 mm
15
Position 1: Single Edgebanders BIESSE-STREAM B1 7.0
Rrf2y0ha
Position 2: Panel Return Systems BIESSE-STREAM B1 7.0
15
Technical characteristics
Pin chain
-CANTER COSTA PRISMATIC/40
- 67kW
- 2 mobile blades Ø 800 /1000 mm max
- Min. distance between centres 60 mm, max 350 mm
- Ø wood min 100 mm, max 400 mm
Ccarihnmuf
- Slab ejection
- Recovery belt
- Roller track and transfer and edger introduction
- Multi-blade COSTA PUMA/2/50
- 79 kW
- 2 shafts 37 kW
- Conveyor belt width 350 mm
- Cutting height 160 mm
- Cutting width 350 mm
- Roller output for transfer on multi-blades for recovery or output b...
15
Position 1: Automatic Drilling Machine WEEKE-BST 500+BST 500 D
Gtc3d7zj
Position 2: Automatic Drilling and Doweling Machine WEEKE-BST 500+BST 500 D
6
Technical characteristics
Power and Motors
Cqqkq9au
Overall dimensions
15
Position 1: Panel Feeding and Loading ITALPRESSE-MAGNUM-2/14.70/5
Position 2: Roller Spreaders ITALPRESSE-MAGNUM-2/14.70/5
Position 3: Continuous Cycle Presses ITALPRESSE-MAGNUM-2/14.70/5
B99xxxuj8t
Position 4: Panel Stacking and Offloading ITALPRESSE-MAGNUM-2/14.70/5
10
Technical characteristics
Edging capacity 450 mm x 1000 mm
Cutting capacity 60 x 350/135 x 250 mm
INDICATOR UNIT WITH 1 MOBILE BLADE
Multiblade saw PINHEIRO AMA 2-414A
Transport chain width 450 mm
Max distance between the two outer slats 450 mm
Distance between the fixed blade and the mobile blade 35 mm mini, 345 mm max or 70 mm mini, 400 mm max
Max sawing thickness 140 mm
Max width of timber passage 1000 mm
Saw blade Ø 450 mm max / 250 mm min
Electric adjustment...
12
Position 1: CNC Machine Centres With Pod And Rail KUPER-KFE-TANDEM 3 1600/450
Position 2: Spiral Wrappers KUPER-KFE-TANDEM 3 1600/450
Qq909
Position 3: Shrink-Wrap Ovens KUPER-KFE-TANDEM 3 1600/450
4
Technical characteristics
Ccaropwcy0
composition:
HFM160 unit for notching on four sides
UCR 237 unit for milling dovetail joints
log cabin drilling unit
section 240 x 140 mm maxi Power and Motors
Overall dimensions
15
Position 1: CNC Machine Centres With Pod And Rail KUPER-KFE-TANDEM 3 1600
Ccwqapbzsh
Position 2: CNC Machine Centres With Pod And Rail KUPER-KFE-TANDEM 3 1600
Position 3: Roller Conveyors KUPER-KFE-TANDEM 3 1600
Position 4: Spiral Wrappers KUPER-KFE-TANDEM 3 1600
Position 5: Shrink-Wrap Ovens KUPER-KFE-TANDEM 3 1600
15
Position 1: Panel Feeding and Loading PRIESS-BAT-DTW-CNC
Pkebd
Position 2: CNC Flexible Drilling & Inserting PRIESS-BAT-DTW-CNC
Position 3: CNC Flexible Drilling & Inserting PRIESS-BAT-DTW-CNC
Position 4: Panel Stacking and Offloading PRIESS-BAT-DTW-CNC
