Used Cold Rolling Line for sale (17,785)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia Fgjdpfjzvaibex Ap Doh

Condition: repair required (used), Year of construction: 2007, Roller profiling line for manufacturing profiles for dry construction, without a hydraulic unit. Fsdezy Ekfspfx Ap Degh Location: In our workshop.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). Fsdpsyw Rzajfx Ap Dsgh The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Width: 260 mm Fgsdpjymzzujfx Ap Dsh

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Fgodpfx Apsfnk Ehj Dsh Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs Fgedpoy St U Sjfx Ap Djh • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: refurbished (used), ROLLFORMING LINE Fgjdpfxsg Rkv Es Ap Djh

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Fgodpfx Apezmzhmj Doh Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) Fgjdpfxetqu U Te Ap Deh One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS Fgodpfxey Rxzho Ap Dsh WIDTH: 450 mm FULL OVERHAUL

Condition: good (used), FS Frank Schäffler Used Machines You are bidding on: a branded folding machine – Schlebach Device features: RBM for non-ferrous metals up to 0.8mm, radius 300 mm steel sheets up to 0.7mm, radius from 1500 mm Fsdpfx Ajz Nh Dfop Dogh stainless steel sheets up to 0.5mm, radius from 1500mm You can see what is possible with this machine in the pictures in the description – very interesting YouTube videos are also available. Other tools and machines, as well as machine accessories, are always available – see the shop. You will receive an invoice according to §25a UStG; the value-added tax is included in the invoice amount. Differential taxation. Free loading is possible. Inspection and testing are possible and desirable after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a freight forwarder commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Article number

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS Fgsdpfjymzxyex Ap Dsh WIDTH: 450 mm

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Fjdpszzyd Nofx Ap Degh Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Fgsdpfjwxv H Dex Ap Deh

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Fedpfsz E Ra Hex Ap Degh Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), Year of construction: 2016, operating hours: 90,01,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . Fgsdpfx Apey Uk A Se Doh SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: good (used), Year of construction: 2014, Koenig Combiline bun production line - used - year of manufacture 2014 - Rex Futura Classic divider - weight range 20-135 g - computer control - maximum output 7,500 units/hour Fodpfszz Ryzjx Ap Degh - rounding station, pre-proofing station, stamping station, bun discharge onto trays or baking pans - machine from production - inspected and cleaned - collection from warehouse/shipping option available - price upon request

Condition: excellent (used), round gutter roll forming line: 14 stations. manual de-coiler, precutting. automatic measurement. Dx53d quality working. input 333mm Fgjdjzyythopfx Ap Dsh

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Fsdpsz A Ry Ujfx Ap Dogh Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: excellent (used), sinus profile 15/75 input : 1000mm only output: 830 mm work automatically, with cutting scissors. Fgedpfezyytuox Ap Doh

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Fgodpfxsz D Dxge Ap Dsh Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: excellent (used), Roll former- Trapez T35/196 Input coils: 1000 mm, 1250mm Output: 1000mm Fgsdpfx Aszycn Isp Dsh thickness: 0.30-0.70mm 27 stations.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1895, SWAH SLV-3 – Corner Insertion Machine Fodszbipvopfx Ap Degh A specialized, highly efficient pneumatic/electric machine designed for the automatic insertion and clamping of corner pieces into rectangular duct flanges (TDC/TDF/Slide-on profiles). Manufactured by the European specialist SWAH, the SLV-3 significantly speeds up the final assembly of rectangular ductwork while ensuring rigid, airtight joints. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model / Typ: SLV-3 • Year of Manufacture: 2001 • Serial No.: 1895 • Application: Fast and automated press-fitting of metal corners into rectangular ventilation ducts. • Voltage: 400 V • Current: 1.1 A • Machine Weight: 96 kg Key Features & Components • High-Speed Assembly: Eliminates manual hammering, allowing the operator to lock ventilation corners into the profile in seconds with consistent, high-quality results. • Heavy-Duty Pressing Mechanism: Delivers a secure, tight seal between the duct profile and the corner piece without deforming the sheet metal or damaging the zinc coating. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Fgedpfoyqtx Hjx Ap Doh Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), round Gutter. fi100 input material 333mm dx53d quality of material Fedpezyytnsfx Ap Dogh automatic cutting machine works with air