Used Colchester Mastiff for sale (65)

Condition: new, Year of construction: 1970, turning diameter over bed 540 mm turning diameter over slide rest 365 mm Tjdpoxpiz Tofx Ac Nof turning length 2000 mm turning diameter in the gap 800 mm turning speeds 18 - 1400 U/min centre height 270 mm spindle bore 90 mm total power requirement 11,0 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,7 x 1,4 x 1,8 m - Multifix Size B - 3-Jaw Chuck 315mm - Chuck Guard - Emergency Stop Device - Foot Switch - Chip Tray - Centering Center

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm Todpfoxnqzxjx Ac Nof inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rear chip guard Coolant device Work light manual available

Condition: new, Year of construction: 2025, 0554 mm Tjdpfx Ajwyd Tnjc Nof 370 mm 2000 mm 280 mm 104 mm 11 kW

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Tedpfjwga Eyjx Ac Nof Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Condition: good (used), Colchester Mastiff 1400 lathe for sale. The machine comes from a workshop that has ceased operations. Fully operational and ready for use. For more information, please contact us. Todpfxew Al T Us Ac Nof

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Tsdpfx Aceq N Ay Aj Nef Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 1500 mm Todpotq Exrjfx Ac Nef Dreh-Ø über Bett / turning diameter over bed 432 mm Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe Todpfx Acsxd D Rfo Nof TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: new, Year of construction: 2025, 0350 mm Tedpjxxb Azsfx Ac Nof 196 mm 0650 mm 170 mm 42 mm 7,5 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, Machine parameters: Tedpfx Aexyiltsc Nsf Control system: FANUC 21iTB Swing diameter over bed: 400 mm Maximum turning length: 1250 mm Swing diameter over carriage: 370 mm Control system: FANUC 21iTB Machine dimensions (L x W x H): 2980 x 1750 x 1750 mm Machine weight: 2200 kg Description: The machine is in good technical condition, and testing is possible by prior arrangement. - Extraction and filtration by Wemac spol. s r. o. - Oil mist separator FILTERMIST FX-2002, serial no. 065177, motor 0.55 kW • Dimensions: L 2,980 x W 1,750 x H 1,750 mm • Total power input: 22 kVA, max. supply 3x 380V • Control system: FANUC 21iTB • Weight: 2,200 kg. Videos of the machine in operation are available.

Condition: good (used), L & Z Lathe, Turning Machine Manufacturer: COLCHESTER Model: Mascot 1600 Turning length: 1600 mm Centre height: 210 mm Swing over bed: 420 mm Swing in gap: 710 mm Swing over cross slide: 270 mm Bed width: 345 mm Spindle bore: 76 mm Tailstock taper: MK 5 Tailstock quill stroke: 140 mm Quill diameter: 75 mm Spindle speeds: 20 - 16000 rpm Spindle motor power: 7.5 kW Dimensions (LxWxH): 2900 x 1200 x 1650 mm Weight: approx. 2100 kg Three-jaw chuck Röhm, 250 mm diameter incl. jaws Quick-change tool post, Multifix system size B incl. holders Chip guard Chip tray Chuck guard Coolant pump Bed stop The machine is in operational condition Forklift available, free loading onto truck Affordable shipping possible Location: 59510 Lippetal You will receive a proper invoice according to §25a UStG (margin scheme, differential taxation) Tedjxzrvqjpfx Ac Njf

Condition: excellent (used), functionality: fully functional, center height: 165 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, total height: 1,350 mm, total length: 1,850 mm, total width: 700 mm, 3 Phase 400V motor is running fine! Left & right running. Geared headstock, gears running in oil. 12 spindle speeds adjustable from 45 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Dickson quick-change toolpost with a total of 4 tool holders. Power feed both longitudinal and cross directions. D1-3 camlock spindle. Foot brake pedal. Induction hardened bedways. MT3 tailstock taper. Distance between centers: 1050mm Center height: 165mm Spindle bore: 35mm Overall dimensions: 185x70x135cm Made in the UK. Todpsxzu Ivjfx Ac Nof Very good overall condition! Includes all accessories as shown in front of the machine in the pictures. Contact us for shipping options! € 3,450.00

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post Tjdeuk H Rbopfx Ac Nof 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: good (used), For sale: Colchester Triumph 2500 lathe, fully functional and ready for operation. The lathe is equipped with a Fagor digital readout and has a coolant pump installed beneath the chip tray. Technical data: Center height: 167 mm, Distance between centers: 635 mm, Swing over bed: 330 mm, Swing over cross slide: 210 mm, Spindle bore: 40 mm, Drive power: 2.2 kW. The sale includes 15 tool holders, a live center, and machine feet. Loading is problematic. Tjdpfoxw N I Nex Ac Njf

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m Tjdpev Azdwsfx Ac Nsf

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Tjdpfsxqialjx Ac Nef Machine weight 1800kg Main Drive Spindle speed range 2500 This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Todpfx Aexm Sm Hsc Nsf Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Toolpost

Condition: used, Year of construction: 1996, functionality: fully functional, Colchester Tornado T-80 CNC lathe production lathe for production from bar up to fi 42mm equipment head 12xVDI30 Bar feeder MB1000 Collet chuck Tjdpfx Aowavu Rec Nef

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter over bed slide: 400 mm, turning length: 1,270 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, Colchester Triumph VS2500 Gap Bed Lathe Immaculate Condition 50" Between Centres Spindle Speeds 75-2500 rpm Swing over bed 400mm Swing over cross slide 246mm Spindle Bore 54mm 2 Axis DRO Newall NMS3000 Interlocked chuck Guard Metric Machine LED worklight 6 x Quick Change Tool Holders 3 Jaw Chuck 10" 4 Jaw Chuck 12" Face plate 14" Fixed Steady Coolant Pump & System 3phase 400V Price includes free delivery with crane offload within 100 miles of Sheffield Tedoxxiyzopfx Ac Njf Any interest please contact me for inspection 

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Tsdpfxornkhye Ac Nef Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: E2A010, MACHINE SPECIFICATION Maximum swing over bed 440mm Maximum turned diameter 215mm X axis travel 187mm Z axis travel (max. turned length) 420mm Carriage inclination 60° (slant bed) Spindle centre height (from floor) 950mm Spindle nose A2-5 Hole through spindle 64mm Maximum spindle speed 4000 rpm Spindle motor 7.5kW X axis Ballscrew (diameter and pitch) 32mm x 10mm X axis rapid traverse rate 30 m/min Z axis Ballscrew (diameter and pitch) 32mm x 10mm Z axis rapid traverse rate 30 m/min Turret tooling type VDI 30 Turret stations 12 Approximate Weight 4000 Kg Machine Equipped with Fanuc 0i-TD CNC Control System Tjdpexwk Spofx Ac Njf Hydraulic 3 jaw chuck 170mm diameter 5 off toolholders Coolant system Lighting Interlocked guarding Manual

Condition: good (used), Year of construction: 1995, operating hours: 18,282 h, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, center height: 585 mm, turning length: 1,250 mm, feed length X-axis: 210 mm, feed length Z-axis: 1,250 mm, quill stroke: 155 mm, quill diameter: 73 mm, total length: 2,740 mm, total width: 1,650 mm, total height: 1,560 mm, metric thread diameter (max.): 40 mm, swing diameter over top slide: 246 mm, bed width: 318 mm, Turning diameter in gap: 585 mm, rotational speed (max.): 2,750 rpm, rotational speed (min.): 6 rpm, overall weight: 2,300 kg, rapid traverse Z-axis: 6,000 m/min, quill mount: MK 5, spindle mount: MK 4, CNC lathe fully functional and ready for operation. All detailed technical documentation available in German. Programs, software, and zero point setting on USB stick. Accessories and tools included. FANUC control system. The lathe can be tested and is ready for use. Sale due to lack of utilization within the company. Invoice with separate VAT can be issued. Loading facility available. Tedpfx Aexr Ua Toc Njf

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Tedpfxjtuut Ue Ac Nef Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Todpfx Asu St S Ajc Njf Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Todpfsrnkdyjx Ac Njf Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No responsibility is taken for the correctness, completeness and up-to-dateness of the information.