Used Colloid Mill for sale (16)

Condition: used, SKU : 057K166 Location : Barneveld Make : Fryma Type : MZ 100 No. : M 14738 Year of construction : 1991 B8Mnu29Rav Main Features Material : Stainless steel Motor : 5.5 KW Specified Features - Colloid mill Material : Stainless steel Colloid mill : (1x) Rotor sizes : Dia. 100mm, Smooth rotor Motor : 5,5 KW, 380 Volt With switchgear : check Extra Specifications : With pressure and temperature measuring points on the house. Technical specs Extra information : smooth rotor What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Brogtec METEOR High performance colloid mill - homogenizer ATEX Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Jafjudag

Year of construction: 2023, Condition: new, Functionality: fully functional, You can see this machine until 22.03 at the Anuga Tec Cologne Hall 8 Stand B 079 at PVS Crushing and emulsifying machine Rcm3T for various products such as meat / sauces / soups pesto / ketchup / mayonnaise Reework applications (baked goods and others) Nut pastes . Pharmaceutical applications . ( in the production of heparin )

Condition: used, SKU : 094Y627 Location : Barneveld Make : PUC Probst & Class Type : K-180 EL No. : 88004 Year of construction : unknown Main Features Material : Stainless steel Motor : 30 KW Inlet diameter : 25 mm Specified Features - Colloid mill Material : Stainless steel Colloid mill in line : (1x) Rotor sizes : dia. 180mm With jacket : check Inlet : 4x dia. 25mm Outlet : dia. 60mm Motor : 25,0/30,0 KW, 380 Volt (Ex) Speed : 1475/2960 Rpm Qcqrb Floorspace : 1,7x0,7 M Total height : 0,7 M Weight : 650 KG ATEX compatible : check What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, SKU : 003Z013 Location : Barneveld Make : Alfa Laval (Fryma) Type : MZ-170D No. : M-12274 Year of construction : unknown Motor Motor power : 37 kiloWatt Main Features Material : Mild steel Motor : 37 KW Inlet diameter : 60 mm Specified Features - Colloid mill Colloid mill in line : check Rotor sizes : dia. 170mm Teethed rotor : check Inlet : ø 60 mm Rlyxwcy2 Outlet : ø 60 mm Motor : 37,0 kW, (400V, 2950 rpm) Speed : 2950 rpm Material : Mild steel, Stainless steel Floorspace : 1,0 x 0,6 m Total height : 0,5 m Weight : 300 kg Extra Specifications : Capacity 2,000 - 20,000 l/h What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, SKU : 354T1040 Location : Barneveld Make : Fryma Koruma Type : ML-150 & MZ-80 No. : 43672/00 & 43679/00 Year of construction : 2000 Main Features Material : Stainless steel Motor : 4 KW Inlet diameter : 450 mm Specified Features - Colloid mill Colloid mill : check With hopper : colloid mill: dia. 330x430 mm (15 Ltr.), corrundum mill: dia. 450x439 mm (20 Ltr.) Inlet : DN40 Outlet : DN50 Motor : colloid mill: 4 kW 400-690 Volt; dosing screw: 1,1 kW 220-480 Volt Speed : colloid mill: 2830 rpm; dosing screw: 13-97 rpm Bz28Pyfp7G Material : Stainless steel 1.4034 (420), Stainless steel 1.4401 (316) With switch : check Weight : 120 & 110 kg CE : check Floorspace : 0,46 m Total height : 1,3 m What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, SKU : 300P750 Location : Barneveld Make : Fryma Maschinen AG (DE) Type : Delmix MZM-VK-7 No. : L 14500 Year of construction : 1991 Main Features Material : Stainless steel Motor : 2.2 KW Inlet diameter : 90 mm Specified Features - Colloid mill Material : Stainless steel Jxw88U Emulsifier : Vacuum emulsifying system Vacuum (t) : check Rotor sizes : dia.120mm With hopper : +/- 7 ltr Hopper jacketed : (+ 1 bar) Inlet : dia.90mm Outlet : dia.60mm Motor : 2,2 KW, 220/380 Volt With gate type stirrer : check With scrapers : check Motor : 0,12 KW, 220/380 Volt With vacuum pump : Edwards RV12 Motor : check Mounted on frame : check Mounted on wheels : check With switchgear : check Floorspace : 1,3x0,8 M Total height : 1,7 M Weight : 240 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, SKU : 289T663 Location : Barneveld Make : Fryma Type : MZ-150/D No. : 15749 Year of construction : 1992 Main Features Material : Stainless steel Mx0Bwo Motor : 22 KW Inlet diameter : 65 mm Specified Features - Colloid mill Material : Stainless steel Colloid mill in line : check (1500 - 15000 Ltr./h) Rotor sizes : dia. 150x100 mm With jacket : check Inlet : DN65 Outlet : DN65 Motor : 22 kW 380 Volt Speed : 2940 rpm Mounted on frame : check Total height : 1,3 m Weight : 400 kg Floorspace : 0,6x1 m What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, SKU : 305S476 Location : Barneveld Make : Probst & Class Maschinenfabrik (D) Type : N-160 No. : 74196 Year of construction : Unknown Main Features Material : Stainless steel Motor : 11 KW Inlet diameter : 32 mm H2Oaq8D Specified Features - Colloid mill Material : Stainless steel Colloid mill in line : check Rotor sizes : dia. 155x70mm Teethed rotor : check Inlet : dia. 32mm Outlet : dia. 32mm Motor : 11 kW 380 Volt (Ex) Speed : 2910 rpm Total height : 0,5 M Weight : 250 Kg Floorspace : 0,8x0,4 M ATEX compatible : check What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, New: Yes Colour: Unknown Field of application: Construction Empty weight: 16.000 kg Capacity: 10 Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Usgum3020L The panel will be in type of compiled to IC standarts.

Condition: ready for operation (used), Machine/vehicle number: 794548, Condition Used This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immidate realese. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centers or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet Unlwbkxj0T (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Total length: 1,000 mm, Total height: 1,500 mm, Total width: 500 mm, Overall weight: 195 kg, Type of input current: AC, Input voltage: 220 V, Power: 7.5 kW (10.20 HP), Versatile melter, suitable for hot melt adhesives, ideal for processing PUR glues from all common manufacturers Technical details: ·System: Speed control AC motor gear pump ·Barrel diameter: 280mm ·Maximum glue supply amount: 20 L/H Czsbp3Mkf8 ·Output pipe: 1 line (or 2 lines) ·Maximum working pressure: 8.5Mpa ·Operating temperature scope: 40-200°C ·Environment temperature scope: 0-50°C ·Temperature control precision: +/- 1°C ·Temperature sensor: Pt100 ·Power supply: 220 V ·Maximum system power: 7.5 kW ·Air pressure applied: 0.5-0.8 Mpa ·Weight: 190 kg ·Connection signal: 2 inputs, 2 outputs ·Installation size: 1,000 x 500 x 1,500 mm ·Level of prevention: IP54 Specification: ·Progressive-heating melting ·The colloid is separated from the air during heat-melting ·Teflon protective layer is coated to prevent carbonization and reduce blocking. ·Stepless adjusting glue amount output ·Humanized main motor operation with protection function ·Function of alarming upon shortage of glue ·Function of no-shutdown during glue changing process ·No residual glue, avoid waste. Application scope: ·Wood coating fitting, textiles lamination, PET transparent boxes, auto inner decoration pieces, bookbinding, household appliance assembly etc. Scope of delivery: ·Set: PUR unit + tube (3m) + nozzle

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Colloid mill, used, fully functional. Bhhdjtf System was only qualified, therefore used once to homogenize a suspension. There was no contact with hormone-containing substances.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Wal Reverse osmosis device for drinking water desalination, was connected upstream of a cleaning system for stainless steel in order to be able to rinse without stains. Also suitable for glasswashers etc. Very good condition, annual service by Wal, test certificate until 02/2025, operating instructions, test book, connection hoses and base frame included. The reverse osmosis devices of the AQUArent® C series are fully sensory, reliable, durable and user-friendly devices for drinking water desalination. The appliances are used to supply consumers who generally require smaller quantities of demineralized water on an intermittent basis. With the appropriate additional equipment, the appliances can also be used to supply consumers with other withdrawal habits. A stainless steel housing closed on all sides and a quiet-running stainless steel centrifugal pump enable use in visually demanding and noise-sensitive areas. The intelligent control system monitors all operating states and communicates with the system operator via a 2-line display. E2Ov9E3 The desalination process of reverse osmosis systems is based on a membrane diffusion process in which pure water passes through a semi-permeable membrane under high pressure and salts, colloids and other substances are retained by the membrane. The water (feed) supplied to the reverse osmosis system is divided into a pure water volume flow (permeate) and a wastewater volume flow (concentrate). The proportion of the concentrate volume flow fed to the waste water must not fall below a certain minimum, as otherwise deposits (scaling or fouling) may form on the membrane surface, resulting in a reduction in the performance of the system. To improve efficiency and increase cost-effectiveness, the other part of the concentrate volume flow is returned upstream of the pump and passed over the membrane again together with the fresh water volume flow. The built-in, pressurized buffer tank stores up to 10 l of permeate and is used to cover consumption peaks. Integrated pre-treatment using an antiscalant dosing pump protects the membranes from deposits. Pressure and flow sensors monitor all relevant parameters. The sensor data is interpreted by the microcontroller developed in-house and output as plain text operating messages on the display. A fully automatic raw water emergency feed ensures that the connected consumer is supplied in the event of a fault (e.g. power failure).

Condition: excellent (used), Year of construction: 1990, The unit with a useful volume of 20 ltr. is used for the production of emulsions, creams, ointments, pastes, lotions, suppository masses etc.. The mixing tool is integrated in the lid. Anchor agitator (0.18 kW - 48 rpm) dissolver Ø 100 mm (0,75 kW - infinitely variable 1400 rpm) Tooth colloid mill (1.1 kW - 2795 rpm) Hvyse2Vf7 min. Filling volume 4 liters

Condition: used, New: Yes Colour: Unknown Field of application: Construction Empty weight: 16.000 kg Capacity: 10 Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts. E2Prn8Y