Used Combination Folding Machine for sale (68,812)

Condition: ready for operation (used), Folding machine MBO T 460, feeder, 4 folding stations, 1 cross folding station, jogger, counter, standard accessories, in good condition. If you are interested, we will be happy to provide you with information about other machines available in our facility. Pgodpfszvf D Dox Aa Hor You are welcome to inspect the machine at our facility after prior arrangement.

Condition: good (used), MBO T500F Folding Machine Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Pedszrfdcjpfx Aa Hsgr Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Pgsdpszuykvsfx Aa Hor Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Psdpfx Aewiri Aja Hogr • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Pgodpfx Aaezhu I As Hsr Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V Pgsdpfxszn I Aas Aa Hsr The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2009, sheet width 3100 mm plate thickness / mm distance between columns / mm Swivelling bending machine 3100SK Folding bench Sheet metal bending machine Pgodewbi Itepfx Aa Hor Folding bench

Condition: ready for operation (used), Available immediately ex-yard: Hydraulic long bending machine Manufacturer: Thalmann Capacity: 6000 mm bending length Pgsdszwua Dspfx Aa Her Material thickness: 2 mm Roller shear Back gauge Drive: 4 kW Bending angle adjustment Weight: 3 tons Price: EUR 6,000.00 (excluding VAT, ex-yard)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, milling spindle length: 30 mm, table length: 1,300 mm, input voltage: 400 V, input frequency: 50 Hz, For sale is a high-quality Felder KF 700 S Professional from the year 2023. This combination circular saw and routing machine combines two full-fledged professional machines into a space-saving unit and impresses with its high precision, robust construction, and proven Felder quality. The machine is in well-maintained used condition and is ready for immediate use. Thanks to the precise X-Roll format sliding table, the pivoting routing spindle, and the powerful 5.5 kW motor, the KF 700 S Professional is ideally suited for carpentry shops, joineries, furniture manufacturing, and professional interior finishing. Equipment: • X-Roll precision format sliding table • Pivoting circular saw unit Psdpfx Aezwmwhoa Hegr • Pivoting routing spindle • Routing spindle quick-change system • Extension table with rip fence • Professional Felder equipment • Dust extraction connections for sawing and routing operations • Saw blade pivotable: 90° to 45° • Format sliding table: 2,500 mm • Rip fence: 2,600 mm • Routing spindle pivotable: 90° to 45° • Routing spindle Ø: 30 mm • Routing table opening: 230 mm • Routing tool Ø max.: 230 mm Special equipment: • 008 7.5 HP motor • 010 Star-delta starter • 014 3-phase CEE socket for additional equipment • 139 On/off switch on the sliding table • 082 Preparation for adjustable slot tool • 071 Angle indicator for circular saw pivoting on the handwheel • 081 Circular saw blade guard, pivotable • 085 Electronic digital display on the circular saw fence with fine adjustment • 103 Routing spindle 30 mm, 115 mm usable height above the table • 110 Angle indicator for routing spindle pivoting on the handwheel • 161 Extension table 1500 for sliding table • 173 Angle grid index system for extension rip fence

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW Psdpfxex Harmo Aa Hsgr dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: used, Year of construction: 1983, sheet width 2540 mm plate thickness 2 mm distance between columns 2600 mm min. cut-off length 5 x s mm Pedpfx Aew H Dkaea Hegr adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: used, Year of construction: 2007, 4-in-1 Combination Hammer C3-31 in good condition Year of manufacture: 2007 3 kW 3 blades Pgedpfx Aaozq Ddls Hjr approx. 500 kg

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Pedpfxjzmu His Aa Hogr Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control. Pgedpfx Aaszmu Hcj Hor

Condition: used, Year of construction: 1998, sheet width 2000 mm plate thickness max. 4000 mm make 2974 rear stop ja foot pedal ja Pgjdpfx Aaoztf Abs Hjr degree steuerbar weight of the machine ca. 3,93 t

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Pgedpezuxwhefx Aa Hsr Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: excellent (used), Year of construction: 2021, Palamides Gamma 502 Year 2021 Banding delivery system for folding machines, saddle stitchers, etc. Height-adjustable infeed Suitable for two product streams (parallel) Press station with a pair of press rollers Shingled product transport for high-speed production runs Pedpfszqtl Eox Aa Hjgr Banding system for two bands Equipped for 50 mm wide banding material Equipped for product thicknesses of 0–6 mm Foldable delivery table Located in Germany Used in conjunction with a Horizon machine; can also be adapted for other folders Available immediately

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Pgjdszmnh Tspfx Aa Hor Electronic counter with packaging Set of inspection cameras.

Condition: used, Year of construction: 2008, serial number 108392 Electric capacity 7,7 Watt working width 2050 mm 4 mm Pedpsztfv Isfx Aa Hjgr weight of the machine ca. 4 t

Condition: new, Year of construction: 2025, The revolutionary and patented bending system enables bending freedom never seen before. Bends up to 300° (150° “up and down”), which are a problem with other long-folding machines, are considered standard on the EVOBEND. = OUR PATENTED BENDING PRINCIPLE = Almost scratch-free bending of EVOBEND provides the aesthetic surplus value. Until now, the bending beams have bent the sheets by means of swivel movements. However, this movement has permanently damaged the sheet metal profiles. The “rubbing” of the bending tools on the sheet metal is now a thing of the past! By rolling the bending tool based on calculated bending curves, only minimal marks are left on the workpiece. = MEASUREMENTS = Bending length: 3200 mm Insertion depth: 1250 mm Number of stands: 4 Total length: 4600 mm Pgedpfefrli Ijx Aa Hjr Total depth: 1880 mm Total height: 1875 mm Working performance: 2 mm sheet metal The 3 meter version is the smallest one of our EVOBEND. We also build 6 and 8 meter versions of the machine.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, overall weight: 17,750 kg, total length: 8,000 mm, total width: 1,800 mm, total height: 1,875 mm, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, EVOBEND D-Series: Flexibility and speed at the highest level Maximum flexibility and precision The EVOBEND D-Series, equipped with the SmartBend principle, offers unparalleled versatility. Complex profiles that previously had to be finalized manually or could not be produced at all can now be manufactured fully automatically. The innovative bending technology ensures fast and precise results through minimal, simultaneous movements. Highest speed As the fastest long bending machine, the EVOBEND D-Series operates with maximum efficiency, regardless of machine size. Each axis can be controlled individually to optimize the entire bending process. This allows the speed to be adjusted to specific work steps and material requirements. Compact design Pgedpsfrlpuefx Aa Hsr The well-thought-out design of the EVOBEND D-Series saves valuable space in your production hall. With a feed depth of 1250 mm and a working length of 6400 mm, the D600 machine requires significantly less space than comparable models. This optimizes the production flow and facilitates integration into existing workflows. Safety and efficiency Our machines are fully enclosed, which not only protects the operator but also the machine from external influences. Retractable safety fences and integrated light barriers ensure the highest level of work safety. Eliminating pivoting bending dies further minimizes the risk of injury. Robustness and low maintenance Thanks to the use of high-quality components, such as precision-manufactured parts and a purely electric drive system, the EVOBEND D-Series is extremely durable and requires minimal maintenance. Eliminating hydraulic components reduces the risk of failures and significantly reduces the maintenance effort. Sustainability and low noise With energy consumption reduced by up to 90% compared to conventional machines, the EVOBEND D-Series is both economically and ecologically advantageous. The quiet, electric drive technology also ensures a pleasant working environment and reduces noise pollution. Material-friendly bending technology The innovative bending principle minimizes imprints and damage to the workpiece. The electric clamping die drive adapts flexibly to different types and thicknesses of material, enabling the gentlest processing. Standard top performance Every EVOBEND D-Series machine is equipped with the highest quality components and functions as standard. From the dual-rail gripper system to the automatic adjustment to material type and thickness, EVOBEND offers uncompromising quality for demanding bending tasks.

Condition: good (used), Year of construction: 2001, sheet width 2020 mm plate thickness 1.5 mm ST Pgodpfxozr Rqhe Aa Hor bending angle max. 180 ° Swing beam adjustment ca. 20.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 1.5 kW weight 1180 kg range L-W-H 2650 x 1230 x 1100 mm Features: - Simple electric motor-driven swivel bending machine - Manual depth/material stop * Stepless adjustment up to a maximum of 700 mm * Adjustment via handwheel from the rear * Analog position display - Simple manual angle adjustment - 1x bending tool set * With bending rail .. 10 mm - Manual lower crossbar adjustment .. approx. 20.0 mm - Emergency stop button on the front - 1x freely movable double foot switch - Operating instructions (DK)

Condition: used, Max height: 2000mm Podpfsvpfp Dsx Aa Hsgr Max diameter: 6mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Pgjdpfjzrwmiox Aa Hor Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) Pgjdpju Ibzwefx Aa Her accessories: - 1 set tools *