Used Compact Inverter for sale (5,466)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 8,328 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 10,430 kg, total length: 3,230 mm, drive type: Elektro, construction width: 1,520 mm, Compact forklift - electric Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: standard Condition: ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 355/65-15 non-marking Rear tires type: super elastic Rear tires size: 28x9-15 non-marking Podewgqq Hjpfx Afhopl Battery voltage: 80V Battery Ah: 980Ah Battery year of manufacture: 2020 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF70-6C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Battery: 80 V 980 Ah, Year of manufacture: 2020

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,420 h, load capacity: 13,500 kg, lifting height: 3,400 mm, fuel type: gas, mast type: simplex, construction height: 2,950 mm, empty load weight: 18,500 kg, total length: 3,500 mm, drive type: Treibgas, construction width: 1,610 mm, Compact forklift truck – LPG Podpfxjx Dnzho Afhspl Load center: 600 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Solid rubber Front tire size: 40x16x30 Rear tire type: Solid rubber Rear tire size: 840/350-559 Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing or financing at attractive terms is always possible for us. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with comprehensive advice on this KSB135G. P.S.: Our forklift master workshop specializes in repair, servicing, refurbishment, and custom builds for forklifts from 8 tons and up. We are also happy to sell your vehicle on consignment through our platform. Crane jib, telescopic – extendable and tiltable. The telescopic arm extends from 2,410 to 3,750 mm; the jib arm can be tilted from approx. 30° downward to 45° upward.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, empty load weight: 22,100 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift truck – LPG Load centre: 500 mm Mast type: standard Condition: ready for operation and fully functional Technical condition: very good Psdpfx Asx Dnzuefhopl Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and side loaders available at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this MAXEIN DWB 200/500G. P.S.: Our master workshop specialises in repair, servicing, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle on consignment in our showroom. Crane arm, telescopic and tiltable. Telescopic boom extends from 2410 mm to 3750 mm. The jib can be tilted from approx. 30° downwards to 45° upwards. Heater, full cab,

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2023 CNC control Working area: 1,500 x 3,000 mm Ppodeydibqepfx Afhsl 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Aigner filter unit Available: March 2026 27126

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Ppsdjydr Dzjpfx Afhsl Fork thickness: 110 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Cushion tires Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: used, This 4-in-1 combo inverter welding machine MIG/MAG ARC MMA TIG Lift 200 A IGBT FLUX is being auctioned online as part of our industrial auction / machinery auction assortment clearance, warehouse sale – individual/display units in Oettingen. Ppodpfx Afeydb Euohjl

Condition: good (used), Year of construction: 1999, Four side planer Leadermac Compact 423 S - machine in stock - after the technical review - year of production 1999 - chrome tops - electronic height adjustment TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - electric adjustment of the left head - electric adjustment of the upper head - electronic height adjustment - five top steel rollers - one upper rubber roller - diameter of the spindles 40 mm Ppjdpfx Aegufi Sjfhel 1 lower spindle 5.5 kW diameter 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW - tool diameters 160 and 180 mm - pneumatic clamps - feed on cardan shafts - smoothly adjustable feed 6-20 m / min - 2.2 kW feed motor power - chrome tops - length of the preliminary table top 1980 mm - diameter of nozzles 4x 130 mm Machine dimensions: - length 340 cm - width 190 cm - height 200 cm - weight 2200 kg

Condition: used, Year of construction: 1996, total length: 2,800 mm, total width: 1,700 mm, total height: 1,550 mm, Weight: 950 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 96-03-537 - Main motor power [kW]: 4.0 - Roller table length [mm]: 2800 - Table width [mm]: 1600 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 75 - Manually adjustable axes: Cutting height, Tiltable - Schuinstelbare zaagaggregaat: Ppsdeyfd Rvepfx Afhjl - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Transport dimensions: 2800mm x 1700mm x 1550mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Ppedpfjxn A S Njx Afhel

Condition: used, Year of construction: 2018, Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Technical details  Filling principle: Atmospheric Output: 800-1,000 bottles/hour Bottle format: 330ml Capper: 26mm crown cap Ppjdpfev Rq Dpsx Afhjl

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Podpfeuca Amox Afhjpl

Condition: used, Year of construction: 2011, operating hours: 938 h, machine/vehicle number: CE145628, Empty weight: 3.070 kg Lifting capacity: 350 kg Working height: 1.400 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Psdpfx Asydhrhjfhepl Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 304 h, machine/vehicle number: CE145603, Empty weight: 1.730 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Ppedpfjydhq Rsx Afhsl Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 1,188 h, machine/vehicle number: CE140920, Empty weight: 2.630 kg Ppodpfx Ajydhqksfhjl Lifting capacity: 300 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x1.53 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 690 h, machine/vehicle number: CE145089, Empty weight: 2.235 kg Ppodsydhqdopfx Afhol Lifting capacity: 450 kg Working height: 1.020 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 160788 € 3038.89 € 3 kW 12 mm 6 mm Ppodpfx Aswiqr Aefhel 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: used, Year of construction: 2017, Industrial robot, training robot Manufacturer: Kuka Model: KR3 R540 KRC4 Compact Year of manufacture: 2017/2018 Low operating hours! Training cell, exhibition cell, demo cell: 800 mm x 1,000 mm Reach: 541 mm Weight: 26 kg Payload: 3 kg Kuka Controller KRC4 Compact KUKA.SystemSoftware KSS SR Kuka SmartPad KCP4 Kuka connecting cable 4 m Ppjdpjwpg Ndofx Afhol 22126ä

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Ppedpfx Afewywciohjl Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm Pjdpfxegyflcj Afhopl planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure adjustable feed on the inverter feed speed range 5-25 m / min adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 Pedpfxehrdmij Afhopl TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m '”MasterCut” plasma rotator Ppjdsxnmbnspfx Afhsl with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system ä21126

Condition: used, Applicable material: Concrete A POLYGONMACH PCC60 60 M3 compact concrete batching plant, if high quality and well designed, can provide users with many advantages: 1. Thanks to its high production capacity, it provides a fast supply of concrete used in large and complex construction projects. 2. Depending on its technical characteristics, especially mold, pump, etc. When used, it simplifies the concrete pouring works and speeds up the works without sacrificing quality. 3. Thanks to the automatic control systems, the concrete quality is ensured at a consistently high level. This ensures excellent results in construction projects. 4. Thanks to its compact design, it takes up little space and is easy to transport, install and disassemble. Thus, users can quickly move these exchanges from one place to another. 5. With energy efficient and environmentally friendly design options, operating costs are lowered, thereby saving more money for users. 6. If properly cared for, it is long lasting and generally delivers a high quality product. Because of all this, a high-quality and well-designed compact concrete batching plant with a capacity of 60 M3 is preferred by construction companies and contractors. A POLYGONMACH 60 M3 compact concrete batching plant can use different types of additives, cements and aggregates depending on its type and properties. These factors determine the desired properties of concrete. Cement: The cements generally used in concrete batching plants are ordinary ported cements, blast furnace slag cements and reactive powder additive cements. These different types of cement can change various properties of concrete. Mobility: stationary Other characteristics: compact, automatic Capacity: 60 m³/h(2,118.88 ft³/h) Ppedsx D A Ayspfx Afhol

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Psdpfsxbd U Eox Afhjpl

Condition: used, Year of construction: 2011, operating hours: 2,524 h, 2011 | Haulotte Compact 10 (10m) | Used Scissor Lift | 2524 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ppodeyf Dwvjpfx Afhel 👷‍♂️ Inspected by an independent expert 41 inspection points 33 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Electric overload problem, basket is in overload, lifting doesn't work up, front side bar little bended 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 22,000 kg, power: 375.1 kW (509.99 HP), year of last overhaul: 2024, Diesel engine: 510 HP Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor Overband magnet Central lubrication Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control We can also offer financing if required. Ppedporrg Ifjfx Afhel