Used Compression Spring for sale (7,610)

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Njdpfx Acefmim Us Aewd Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Nwodsdzqn Uepfx Ac Aed Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm Nedpjh U Dtuofx Ac Aowd - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Nsdpfowypqrsx Ac Aswd Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch Nwodpfoiyu Ifox Ac Ajd - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B Nsdpfehalvdox Ac Aswd - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, axle configuration: 2 axles, first registration: 07/1990, suspension: steel, tire size: 425/65-R22.5, Year of construction: 1990, Equipment: ABS, = Additional options and equipment = - Leaf suspension - Drum brakes = Notes = 1990 FLANDRIA 20FT chassis with leaf suspension (3 leaves), ROR axles equipped with drum brakes (2 x 10,000 kg), 20FT, 425/65-R22.5 tyres (L: 8/6 mm; R: 8/11 mm), unladen weight: 3,095 kg, gross vehicle weight: 30,000 kg, Belgian registration with valid technical inspection until 12.06.2026 = Further information = Axle configuration Axle make: ROR DRUM Brakes: drum brakes Suspension: leaf suspension Rear axle 1: tyre size: 425/65-R22.5; max. axle load: 10,000 kg; left tyre tread: 50%; right tyre tread: 50% Nsdpew I D Imefx Ac Aowd Rear axle 2: tyre size: 425/65-R22.5; max. axle load: 10,000 kg; left tyre tread: 40%; right tyre tread: 70% Weights Unladen weight: 3,095 kg Payload: 26,905 kg Gross vehicle weight: 30,000 kg Functional Body make: FLANDRIA OP CC 2 A Maintenance APK (Roadworthiness inspection): valid until 06.2026 Condition General condition: average Technical condition: good Visual condition: average Additional information Please contact Arne Honingh for further details.

Condition: excellent (used), mileage: 12,75,885 km, power: 279 kW (379.33 HP), first registration: 07/2004, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,300 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, spoiler, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (parking heater) = Comments = TRANSPORT TO ANTWERP 590 EURO = Further information = Axle configuration Tire size: 315/80 R22.5 Front axle 1: Steered; Suspension: parabolic springs Front axle 2: Steered; Suspension: parabolic springs Rear axle 1: Twin tires; Suspension: leaf springs Rear axle 2: Twin tires; Suspension: leaf springs Weights Unladen weight: 13,980 kg Payload: 22,020 kg Gross vehicle weight (GVW): 36,000 kg Condition Technical condition: very good Visual condition: very good Nwedjx S Nkpspfx Ac Aed Identification Reference number: 17

Condition: used, total length: 2,000 mm, total width: 1,400 mm, total height: 1,600 mm, Weight: 1.400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 4 - Max. working width [mm]: 1500 - Backgauge depth [mm]: 800 Nwjdoymc Dqspfx Ac Ajd - Sheet support system: None - Finger guard: Fixed - Transport dimensions: 2000mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2015, MANUFACTURER: KAESER MODEL: TF174 Nodpoyn Egkjfx Ac Aowd SERIAL NO.: 1216 YEAR: 2015/08 POWER (kW): 2.52 CAPACITY (m³/min): 17 PRESSURE (bar): 16

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: AC, volume flow: 486 m³/h, total width: 610 mm, total length: 625 mm, total height: 1,030 mm, overall weight: 92 kg, input voltage: 230 V, ambient temperature (max.): 50 °C, ambient temperature (min.): 1 °C, type of cooling: air, pressure (max.): 14 bar, power: 0.98 kW (1.33 HP), input frequency: 50 Hz, Equipment: type plate available, We offer this new Friulair ACT 80 compressed air refrigeration dryer, year of manufacture 2022. Voltage: 230 V Frequency: 50 Hz Power consumption: 0.98 kW Current: 4.6 A Max. operating pressure: 14 bar Air flow rate: 8,100 l/min / 486 m3/h Refrigerant: R407C Weight: 105 kg (gross) Nwjdpfx Ajyf Earoc Ajd Condensate drain: Bekomat If you have any questions or need more information, please send us a message or give us a call.

Condition: excellent (used), mileage: 5,05,329 km, power: 335 kW (455.47 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65-R22.5, axle configuration: 4x4, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, total length: 8,570 mm, total width: 2,500 mm, Year of construction: 2011, operating hours: 4,326 h, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, crane, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Leaf spring suspension - Power brake booster - High beam headlights - Windscreen - Speed limiter - Cab - Particulate filter - Radio/CD player - Sun visor - Pre-heating system - Immobilizer - Power take-off (PTO) - Towing hitch = Remarks = 2011 MERCEDES-BENZ ACTROS 2046 4x4 with 505,329 km, HIAB 288 EP 5 HIPRO crane + remote control, outriggers with 4 hydraulic support legs, loading platform, water tank, full leaf spring suspension + drum brakes, automatic transmission, PTO, drawbar, air conditioning, various differential locks, front axle tires: 385/65-R22.5 (L: 3 mm; R: 4 mm), rear axle tires: 315/80R22.5 (L: 15/16 mm, R: 16/11 mm), Belgian registration = Additional Information = Technical Information Nwjdjxy N Dispfx Ac Asd Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Axle brand: DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 385/65-R22.5; Differential lock; Max. axle load: 9,000 kg; Steering; Left tire tread: 20%; Right tire tread: 25% Rear axle: Tire size: 315/80-R22.5; Twin tires; Differential lock; Max. axle load: 12,000 kg; Left inner tread: 100%; Left outer tread: 95%; Right inner tread: 70%; Right outer tread: 100% Weights Curb weight: 15,540 kg Payload: 3,460 kg Gross vehicle weight: 19,000 kg Functional Mast: Slider Mast length: 15 m Crane: HIAB 166 D-4 HIDUO + Rotator, year of manufacture 2008, mounted behind the cab Body manufacturer: HIAB 288EP-5 HIPRO Pump: Yes CE marking: yes Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), mileage: 5,32,176 km, power: 110 kW (149.56 HP), first registration: 06/1995, fuel type: diesel, tire size: 10R17.5, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro1, suspension: steel, total length: 8,400 mm, total width: 2,550 mm, total height: 3,900 mm, loading space length: 6,450 mm, loading space width: 2,450 mm, loading space height: 2,800 mm, Year of construction: 1995, Equipment: ABS, spoiler, tail-lift, = Additional Options and Accessories = Njdpfx Acsuutw As Ajwd - Leaf suspension - Brake booster - Roof spoiler - High beam - Speed limiter - Tail lift - Toolbox = Further Information = Axle configuration Tyre size: 10R17.5 Suspension: Leaf suspension Front axle: Steering; Left tyre tread: 70%; Right tyre tread: 70%; Brakes: Disc brakes Rear axle: Left tyre tread: 50%; Right tyre tread: 50%; Brakes: Drum brakes Weights Unladen weight: 5,500 kg Payload: 6,500 kg Gross vehicle weight: 12,000 kg Functionality Tail lift: DHOLLANDIA DHLM, rear tailgate, 1,500 kg Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), mileage: 6,14,915 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 7,900 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, fog lights, power assisted steering, retarder, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - High beam headlights - Intarder - Radio/CD player - Sun visor - Pre-heating automatic system = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Front axle: Steered; Suspension: Parabolic springs Rear axle 1: Twin tires; Reduction: external planetary axles; Suspension: Leaf suspension Rear axle 2: Twin tires; Reduction: external planetary axles; Suspension: Leaf suspension Weights Unladen weight: 18,240 kg Payload: 7,760 kg Nwodpfx Aeyt I E Tjc Aed gross vehicle weight: 26,000 kg Condition Technical condition: very good Visual condition: very good Identification Reference number: 82

Condition: used, axle configuration: 2 axles, first registration: 03/1995, suspension: steel, tire size: 425/65-R22.5, Year of construction: 1995, Equipment: ABS, = Additional options and accessories = - Leaf suspension - Drum brakes = Notes = 1995 FLANDRIA 20FT chassis with ABS, leaf suspension (3-leaf), ROR axles with drum brakes (2 x 10,000 kg), 20FT, 425/65-R22.5 tires (L: 14/13 mm; R: 14/15 mm), unladen weight: 3,110 kg, gross vehicle weight: 30,000 kg, Belgian registration with valid technical inspection until 13/06/2026 = Further information = Axle configuration Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf suspension Nedpeyt Rtyefx Ac Ajwd Rear axle 1: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 90%; Tire tread right: 90% Rear axle 2: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 85%; Tire tread right: 95% Weights Unladen weight: 3,110 kg Payload: 26,890 kg Gross vehicle weight: 30,000 kg Functional Body manufacturer: FLANDRIA OP CC 2 A Maintenance APK (general technical inspection): valid until 06/2026 Condition Overall condition: average Technical condition: good Visual condition: average

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Technical specifications: - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min - Delivery rate: 950 L/min - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 Nwodpfxeyrpnaj Ac Aod - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg Nsdpfx Aeyif I Usc Aswd New, unused, in mint condition from stock

Condition: good (used), axle configuration: 2 axles, first registration: 08/1986, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1989, = Additional options and accessories = - Leaf suspension - BPW axles - Drum brakes = Remarks = 1989 SHLADOT 20FT swap chassis with multi-leaf (4-leaf) spring suspension, BPW axles with drum brakes, 20FT, 385/65-R22.5 tyres (Left: 4/2 mm; Right: 8/8 mm), unladen weight: 2,970 kg, gross vehicle weight rating: 28,000 kg, Belgian registration with valid technical inspection until: 23.04.2026 = Further information = Axle configuration Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 25% Rear axle 2: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Weights Unladen weight: 2,970 kg Payload: 25,030 kg GVWR: 28,000 kg Functional Body manufacturer: SHLADOT SD 90 Nwjdpfx Ajw I Dkusc Aed Condition Technical condition: good Visual condition: good Additional information Please contact Arne Honingh for more information.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Nwjdpemt Dcxefx Ac Ajd Type and amount of refrigerant R410a, 900 g

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 The dryer is fully operational. Nedpfx Acsymmbte Aewd

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Nwjdpfxjv Rmkfs Ac Aed -Spring element: 2 pieces, for machine tools and systems -Spring element: Ø 160 mm -Mounting hole: M16 -Price/Fee: complete -Dimensions: Ø 160 x 38 mm -Weight: 2.3 kg/piece

Condition: good (used), mileage: 2,37,089 km, power: 199 kW (270.56 HP), first registration: 01/2004, fuel type: diesel, wheelbase: 4,800 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, total length: 8,550 mm, total width: 2,550 mm, total height: 3,320 mm, loading space length: 6,210 mm, loading space width: 2,540 mm, loading space height: 2,070 mm, Year of construction: 2004, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 7,790 cc Transmission: ZF, 8-speed manual Nsdpfx Acjytgd Is Aswd Weights Unladen weight: 8,290 kg Payload: 10,710 kg Gross vehicle weight (GVW): 19,000 kg Functional Tail lift: DHollandia, 2,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 05/2026 Technical condition: good Further Information Please contact Vitali Lenda for more information.

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nwjdoxbzaljpfx Ac Ajd Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. Nodpfx Acsmt Dcqs Aowd 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Nedpfxjxby D As Ac Aswd Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating