Used Compressor for sale (3,304)

Condition: used, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar Hodottv Ibopfx Airow The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance-friendly and service-oriented drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost loss-free operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox assembly makes these systems ideal for use under the harshest operating conditions. - Ideal for very high compressed air demands - Robust drive unit with high power reserves - Almost loss-free concept with an efficiency of > 98% - Maintenance-friendly and service-oriented drive concept ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivery volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Hodpfx Aiewq Sz Isrow Features: - Focus Control 2.0 control system - Network pressure sensor - Belt-driven drive system - Soundproofed

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately Hedjxaahxspfx Airew - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 108 kg, power: 55 kW (74.78 HP), fuel type: electric, Danfoss SH1804ABE 44.5KW refrigeration compressor for sale R410 manufacturer: Danfoss Hjdpjyhpl Defx Airsw year of manufacture: 2016 type: SH180B4ABE Compressor type Hermetically sealed scroll Mode Medium temperature (MBP), High temperature (HBP) Refrigerant Freon R410A Cooling capacity EN12900 44500 W Volumetric productivity 29.6 m3/h Compression volume 170.2 cm3 Power supply 3 phase / 380-420 V / 50 Hz Power factor 3.21 Maximum operating current 27.0 A Inrush current 170.0 A Oil volume 6700 cm3 Pressure line connection 28.6 mm Suction line connection 41.28 mm Dimensions 317.5 × 317.5 × 682.5 mm Weight 108.0 kg Displacement, cm3/rev: 170.2 Power supply: 380-400V/3 phases/50Hz Cooling capacity, kW, R410A, ARI air conditioning (To=+7.2C, Tk=+54.4C, SH=11.1K, SC=8.3K): 44.5 Oil charge (l): 6.7 Net weight (kg): 108

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Equipment / Additional information: Hsdsyhpqtepfx Airew The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor Hsdpfoxzg I Iex Airew The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Hjdpfx Aiexzg Rvjrew Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: excellent (used), Year of construction: 2000, volume flow: 1.2 m³/h, KAESER AIRCENTER SM 11 screw compressor Motor 7.5 kW Capacity 1.20 m3/min. Pressure 7.5 bar Hjdpfxexn Atmj Airjw THE COMPRESSOR IS FULLY OPERATIONAL.

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Hsdpfx Aoy Udfmeirsw Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: excellent (used), Sullair ES-6 rotary screw compressor Technical details: 7,5 kW 10 bar capacity 0,97 m3/min weight 150 kgs Hodpfx Ajzt Nw Ajirjw runned hours: 7011 recently serviced

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 513 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Oil-free screw compressor, Atlas Copco ZT55VSD Hodezwdt Tspfx Airew Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve Hodpfezu Aibox Airjw The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Manufacturer: Atlas Copco Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ Hodpfx Aiszvmnqsrsw If you have any questions or require further information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Hsdpfszznqksx Airjw Year of manufacture: 2010 Operating hours: 64,380 h

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Hjdjzzp N Ijpfx Airew Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: excellent (used), Year of construction: 2009, operating hours: 58,438 h, functionality: fully functional, power: 110 kW (149.56 HP), volume flow: 1,227.6 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor, Kaeser DSD202 110 kW 8.5 bar 20.46 m3/min Year of manufacture: 2009 Operating hours: 58,438 Hodpezna Rpjfx Airsw

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Hodezp Ilqopfx Airjw Engine power: 11 kW

Condition: used, Two-stage compressor Bitzer -Type: S6F-30.2 -Volume: 101.1 m3/h Hjdpfx Aiszxy Uijrew -Cooling capacity for R404A: 35.7 kW at -30°C/40°C, 25.3 kW at -40°C/40°C -Items in magazine: 2 -Reference number: S 256 -Condition: Used in very good condition, ready to work

Condition: used, Compressor DWM Copeland -Type: D8DH5-500X-AWM/D -Volume: 151 m3/h -Cooling capacity: 103.4 kW at -5°C/40°C, 85.3 kW at -10°C/40°C, 44.5 kW at -25°C/40°C -Refrigerant: R404A -Quantity in stock: 1 -Reference number: S 254 -Condition: Used in very good condition, ready to work Hodpfjzxzlpex Airew

Condition: excellent (used), S014913 PROD. ATLAS COPCO TYPE GX18 S/N API441069 Hjdpfx Aez Dwb Isirsw YEAR 2005 POWER (kW) 18.5 CAPACITY (m3/min) 2.64 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 46443 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2018, operating hours: 513 h, functionality: fully functional, overall weight: 649 kg, power: 33 kW (44.87 HP), fuel type: diesel, Atlas Copco XAHS 38/XAS88/Compressor/Construction Compressor/12 Bar • Manufacturer: Atlas • Model: Copco XAHS 38/XAS88 • Year of manufacture: 2018 • Operating hours: 513 hours • Power: 33 kW/44 hp • Engine: Kubota 4-cylinder diesel engine • 12 bar Hsdoz A Dq Tspfx Airow • Transport length: 1.94 m • Transport width: 1.16 m • Transport height: 1.05 m • Total weight: 649 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2018, S016947 PROD. ALUP TYPE ALLEGRO26 CE S/N ITJ210759 YEAR 2018 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) 47881 FREQUENCY CONVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 1" NEW/USED used DOCUMENTATION no Hjdsz E Rpbjpfx Airjw

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Hjdpfx Aisz A Sypsrow Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. A demonstration under power is possible at any time in our showroom.

Condition: new, PROD. ATLASCOPCO Hodpfx Aioz Diquerew TYPE G11FF S/N ITJ1078585 YEAR 2026 POWER (kW) 11 CAPACITY (m3/min) 1.51 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 INVERTER no BUILT-IN DRYER yes, R513a 0.5kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500 L DOCUMENTS yes CONNECTION 1 NEW/USED NEW

Condition: excellent (used), Year of construction: 2006, S009758 PROD. ATLASCOPCO TYPE GA45 PLUS S/N API507879 YEAR 2006 POWER (kW) 45 CAPACITY (m3/min) 7.73 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 17837/35122 2021.10.29 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) no Hsdpfx Aiez D Dtkjrow ON TANK no DOCUMENTS no NEW/USED USED