Used Construction Waste Dump for sale (22,394)

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included. Bljdpfx Abszvgkxjtel

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. Blsdpozi Dnzefx Abtjl - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling Bledpfxeyfta Ts Abtjl The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Blodjr Dufbopfx Abtsl Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter Bljdpfx Abexdttpjtsl - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: used, functionality: fully functional, Year of construction: 1985, Flatbed trailer CTC SPA RP26S Registered in 1985 3 axles Tires in 40/50% condition Length: 9.68 m, width: 2.5 m, payload: 195 quintals Bjdpjzx D R Usfx Abtjll Double hydraulic ramps Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space volume: 53 m³, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire condition: 50 %, Menci SL105R semi-trailer Bsdpfx Abjzxxp Sstsll 52 m³ tipper with tarpaulin air suspension 3 axles BPW axles GVW 38,000 kg - payload 29,000 kg Total length of the semi-trailer: 12 m Width: 2.55 m 1st axle is height-adjustable Tires: 50% tread (385/65 R22.5) ADR approved for FL-AT-OX All information subject to change without notice.

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Bsdjzvdk Ajpfx Abtell Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: as good as new (ex-display), The scope of delivery includes: 1x waste container, grade II Manufacturer: Weber Depth, lid closed: 755 mm Depth, lid open: 770 mm Height, lid closed: 1,320 mm Overall width: 1,350 mm Capacity: 360 kg Volume: 770 liters Additional data / information: Material color, container: black Material color, lid: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Bledeku Aw Nspfx Abtol Tires: 4 tires (2 with brakes) Unladen weight: 68 kg Note: Usable width and usable depth taper towards the bottom. General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bsdpevu Rq Defx Abtjll General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Year of construction: 1992, operating hours: 1 h, condition: used, Transmission: Automatic Bjdpfx Abszxc Thetsll Empty weight: 5.000 kg Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. Bodpondcxgefx Abtsll * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 21,000 kg, number of seats: 2, Year of construction: 2002, operating hours: 6,681 h, Terex TA 30 Dumper/6x6/Rear tailgate/Air conditioning/Heated dump body/6681 operating hours • Manufacturer: Terex • Type: TA30 • Year of manufacture: 2002 • Operating hours: 6681 hours • Power: 261 kW/355 hp • Engine: 6-cylinder diesel Cummins QSM11 engine • 2 seats • Air conditioning • 6x6 all-wheel drive • Heated dump body • Dump body volume: approx. 16 m³ • Hydraulic rear tailgate • Tires in good condition • Transport length: 10 m • Transport width: 3 m • Transport height: 3.45 m • Total weight: 21000 kg • 1 owner • German machine Bsdpfozt Sizjx Abtoll • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Year of construction: 2021, condition: used, General information Bledpfxezut E Hs Abtol Field of application: Freight transport Drivetrain Make of engine: Honda Weights Empty weight: 945 kg Functional Lifting capacity: 3 kg History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2400 cm Latest inspection: 2026-06-11 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker Junior HD 24-K Hybrid construction year 10-2021 from the first owner with only 39 hours. Lift is like new and has among other things: Powered by a Honda petrol engine or an electric motor, integrated bend rail, storage box. Changes and writing and typing errors reserved.

Condition: used, functionality: fully functional, power: 44.5 kW (60.50 HP), gearing type: automatic, fuel type: diesel, overall weight: 5,990 kg, operation weight: 3,475 kg, tire condition: 80 %, first registration: 09/2023, Year of construction: 2021, operating hours: 850 h, Equipment: additional headlights, all wheel drive, differential lock, hydraulics, trailer coupling, We are offering this used Paus SMK 9036 articulated dump truck, manufactured in 2021. Engine power: 44.5 kW Rated speed: 2200 min⁻¹ Bsdpfx Aozwmtcebtsll Operating weight: 3475 kg Permissible total weight: 5990 kg Permissible front axle load: 4800 kg Permissible rear axle load: 4800 kg Year of manufacture: 2021 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Bjdpfszlr N Sox Abtell

Year of construction: 2022, operating hours: 76 h, condition: used, Komplet Krokodile shredder, year of manufacture: 2022, operating hours: only 78h!, weight: 15,000kg, crawler undercarriage, throughput up to 200t/h, radio remote control, shaft length: 1,500mm, output material size: 60–150mm, magnetic separator belt, diesel engine: [160kW/220hp], in very good condition, immediately operational. Transport dimensions: Height: 2,290mm Width: 2,200mm Length: 6,900mm Leasing or financing options available upon request. Mr. Mihm (phone) is happy to assist you. For further information, please visit our website. Subject to prior sale and errors. = Further information = Bjdsyxknispfx Abtoll Please contact Tobias Ebert for more details.

Year of construction: 2006, operating hours: 7,913 h, condition: used, Terex Pegson AX 877 E/M Trak jaw crusher, year of manufacture: 2006, operating hours: 7,913, engine: CAT [149 kW/200 hp], magnetic separator, 80% chain undercarriage, remote control, weight: 29,390 kg, German machine On request, we are happy to offer you a leasing or financing package. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Errors and prior sale excepted! = Further Information = Please contact Tobias Ebert for more details. Bljdpszwluxefx Abtjl

Year of construction: 2019, condition: used, Field of application: Freight transport Make of engine: Honda Lifting capacity: 2 kg Number of owners: 1 Hydraulic outreach: 2100 cm Remote control: Cable Bedpfx Abszk Hckstoll Latest inspection: 2025-06-10 Production country: DE Please contact Michael Overmeer for more information Böcker Junior HD21 Furniture lift construction year 2019 from the first owner. Options: Honda petrol engine, toolbox, remote control, aluminium basket. Last inspection and major maintenance service at Böcker 06-2025 (invoice € 3.976,-available). Changes and writing and typing errors reserved.

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery waste wood processing plant comprising: AS-1200 hopper fed 5 ton per hour double shaft pallet shredder magnetic belt cross conveyor 2m Bodpfx Abozx Tfzetsll 6m incline conveyor 3T Shredder Complete with Y2805-4 75kw drive motor Sawdust 11kw fan blower & cyclone hopper with sawdust collection bin screw elevator conveyor HT Furnace HGJ.3 sawdust dryer 11kw with Nu-wy B55-2H 135-800kw x 182 degC burner 4-vertical column gradual heat transfer chamber drying system 4-zone dryer controls & secondary drive fan 11kw 5m incline conveyor 3m incline conveyor cylindrical glue bin with IBC Weighcell, Greaves spiral mixer agitator 6m incline 4kw motor screw conveyor 2 - 3m horizontal screw conveyor 4m horizontal screw conveyor

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Bsdpen E Rm Ejfx Abtell Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Blsdpfx Aezrzymsbtel Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70%. - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cabin): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with step control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep bucket volume: approx. 0.60 – 1.00 m³ 31826

Condition: used, functionality: unexamined, mileage: 41,228 km, first registration: 10/2017, fuel type: diesel, empty load weight: 13,800 kg, maximum load weight: 40,000 kg, fuel: diesel, color: white, loading space volume: 24 m³, Year of construction: 2017, operating hours: 5,655 h, Manufacturer: Iveco Type: Astra HHD9 86.54 Tipper Date of first registration according to registration certificate: 20.11.2017 Mileage: 41,228 km Operating hours: 5,655 h Drive type: Diesel Unladen weight: 13,800 kg Payload: up to 40,000 kg Load volume: approx. 24 to 28 m³ Driven axles: 3 Bjdpfjzwc Nasx Abtjll Purchase price (net): €40,000 plus legally applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Bljdpfeyhbxcex Abtel Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Blsdpsyq Ngtsfx Abtjl Year of manufacture: 2015 Pressing force: 40 t