Used Consumption Goods for sale (25,195)

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Rsdpfx Aozpbq Hoiroch Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Rcjdpfozpv Iajx Airjh Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: new, mileage: 28 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,415 kg, maximum load weight: 2,600 kg, overall weight: 6,000 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,700 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 6S15 with aluminum flatbed, rear-mounted loading crane with radio remote control. The vehicle is available for rent with a purchase option. Chassis: Fuso 6S15 Canter, gross vehicle weight 6,000 kg, payload finished vehicle 2,345 kg - Manual transmission - Limited slip differential - Batteries: 2 x 100 Ah - Trailer coupling with ball head, 3,000 kg with wiring kit (factory installed), possible upgrade to 3,500 kg - Heated exterior mirrors - Automatic climate control - Radio pre-installation, radio - Reversing alarm - Power take-off with increased RPM - Battery and AdBlue tank covers - Battery cut-off relay pre-installation - Continental traction tires 205/75/R16C - Seat covers - Optional reversing camera on request - Aluminum flatbed, external dimensions: approx. 2,800 mm x 2,070 mm x 400 mm - 18 mm floor plate - Floor subframe with airline rails all around - Airline rails also in the bulkhead - Side panels made of anodized aluminum with folding step, easily removable - Work light Rcjdpsyhxdysfx Airoh Loading crane: with 4 hydraulic extensions + mechanical extension, with radio remote control and hydraulic front outriggers (manufactured in Italy) - Remote control (high-quality, proportional control, 2 simultaneous functions, etc.) - Lifting capacity according to manufacturer: 3.55 m = 995 kg, 5.0 m = 670 kg, 6.40 m = 495 kg, 7.85 m = 365 kg, 9.30 m = 290 kg + manual extension 10.60 m = 200 kg - Zinc primer, Dinitrol cavity protection, stainless steel screws and stainless steel pipe clamps - Additional front stabilizers - Hydraulic tank - Pressure relief valve - Emergency stop - Lifting hook - User manual and parts list Errors and prior sale excepted. ... Automatic climate control, VAT deductible, ASR (traction control), ABS, radio, on-board computer, heated mirrors, immobilizer, central locking with remote, driver airbag, trailer coupling, power steering, locking differential, spare wheel, cab: short-haul, electric windows, crane, new condition, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/out-of-town), particulate filter, available for rent, emission sticker: green (class 4)

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. Rcodszl Sydjpfx Aireh More photos and full specifications: / * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system Rcedpfxsz Ea E Sj Airoh • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe Rjdpfx Aez E A Rwsirjch - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). Rcjdpfx Aiez Dhl Roreh * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Redpfozvrf Iex Airjch Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,550 kg, maximum load weight: 3,950 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,480 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Fuso 9C18, new model 2026, with GSR and aluminum platform body - immediately available - GSR including reversing camera, turning assistant, tire pressure and temperature monitoring, etc., available from 07/2024 - cruise control - comfortable driver's seat - co-driver's double bench seat - automatic climate control - wheelbase: 4.75m - permissible total weight: 8550kg, derated to a gross vehicle weight (GVW) of 7490kg, payload approx. 4000 kg (total weight of 8550kg possible without modification, then payload approx. 5000kg!) - platform body: 6.10m x 2.48m x 0.50m - 2x toolbox Rodozvy Nuspfx Airoch - trailer hitch 3500kg - 3x work lights - errors and prior sale excepted! - More information and additional XXL images on our website: - For inquiries in English, please call ?is=CKSKltjQWTwyvTLJ ... Climate control, automatic transmission, VAT can be shown, ASR, ABS, multifunction steering wheel, radio, onboard computer, cruise control, heated mirrors, electric windows front, electric door locks, central locking with remote control, trailer hitch, fog lights, power steering, rev counter, differential lock, outside temperature indicator, tinted windows, electrically adjustable mirrors, tachograph, spare wheel, cab: close sales, electric windows, work lights, additional lights, heat-protective glazing, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, available for rental, particulate matter badge: 4 - Green, tire pressure loss warning

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Rodpfx Aisrci U Herjch Peeling diameter: 35 - 100 mm of unsorted onions

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard Rodpfx Aiozxc Rmorjch 2-hand operation

Condition: used, Year of construction: 1999, Used filling monoblock SICMEA Cometa 12/5 4500 bph The used filling monoblock SICMEA Cometa 12/5 4500 bph provides a technical solution for filling oil into PET containers. Since Sicmea manufactured this model in 1999 , it ensures a production capacity of 4500 bottles per hour while designing it for packaging formats of 2 L and 5 L. Consequently, it remains a reliable option for industrial bottling lines. Technical features of the Used filling monoblock SICMEA The SICMEA Cometa 12/5 4500 bph uses a volumetric filling system, which ensures precise dosing regardless of the product’s viscosity. Additionally, the monoblock integrates 12 filling valves, and each valve features a fixed nozzle, which guarantees a uniform flow throughout the entire filling cycle. As a result, the machine provides good consistency. Moreover, the capping system handles plastic screw caps efficiently. The 12 capping heads operate in sync with the filling process, ensuring high production efficiency and a hermetic seal for the container. Furthermore, this setup minimizes product wastage while maintaining precision. Rcodpfx Aiov Nyzboroh The machine follows a clockwise operating cycle, thereby optimizing the arrangement of mechanical components to maintain continuous and uninterrupted operation. Similarly, its structural design enhances workflow efficiency. Power supply and electrical data The SICMEA Cometa 12/5 4500 bph filling monoblock operates with a power supply of 380V, 5 kW, and 50 Hz. These parameters make it compatible with major industrial production lines. Consequently, it ensures operational stability and optimizes energy consumption. Additionally, its electrical system supports high-efficiency performance. Safety and compliance The system includes safety devices that protect the operator and ensure compliance with current regulations. In particular, mechanical guards and emergency stop sensors minimize the risk of accidents and maintain a safe working environment. Moreover, its safety mechanisms improve workplace efficiency while reducing downtime. Applications and compatibility The SICMEA Cometa 12/5 4500 bph efficiently fills oil into PET containers, ensuring a precise and reliable bottling process. In addition, its compatibility with 2 L and 5 L formats allows manufacturers to manage production flexibly and adapt to various market needs. As a result, businesses benefit from increased versatility. With a capacity of 4500 bottles per hour, this monoblock supports high-volume production. Furthermore, it allows easy integration into existing bottling lines. Since its design enhances automation, it streamlines production processes effectively. Conclusion of the Used filling monoblock SICMEA The used filling monoblock SICMEA Cometa 12/5 4500 bph delivers a technical solution for volumetric oil filling in PET containers. Thanks to its optimized design, robust structure, and fully automated configuration, it ensures high production performance. Additionally, the integrated safety systems and efficient operation make this monoblock a reliable option for companies that require a high-performance system that meets industrial standards. Ultimately, this machine represents an effective solution for large-scale oil bottling operations.  

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear Rcodpfji Ri Idex Airsh 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Rcodpfx Aisd Etfzjreh

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Rjdped Etf Djfx Airoch

Condition: used, Angle sealing machine with shrink tunnel For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Rcjdpsz Dtf Aefx Airjh Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), mileage: 50,189 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 93 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, number of seats: 3, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, seat heater, sliding door, start-stop system, = Additional Options and Accessories = - 2-pedal control - 7-inch touchscreen - 12-volt socket - attention assist - outside temperature display - heated side mirrors - passenger airbag - lighting in the cargo area - hill start assist system - car kit - stability class 1 - DAB radio - third brake light - electric windows, front - EURO 6 - driver airbag - height-adjustable steering wheel - wireless smartphone charging function - keyless start/go - air conditioning - LED daytime running lights - front center armrest - rain sensor - reversing camera - voice control - lane keeping assist - steering wheel shift paddles - thermal glass - blind spot assist - two rear doors - partition without window = Notes = MERCEDES-BENZ SPRINTER 315 CDI | 170 hp | 9G-TRONIC | CAMERA | NAVIGATION | LED Powerful and excellently equipped Mercedes-Benz Sprinter 315 CDI with 170 hp OM654 diesel engine and comfortable 9G-TRONIC automatic transmission. The ideal commercial vehicle for those who value reliability, comfort and safety. KEY FEATURES 170 hp OM654 diesel engine Rcsdpez Iq Nmjfx Airsh 9G-TRONIC automatic transmission MBUX multimedia system Navigation & DAB digital radio Parking package with reversing camera Blind spot assist Active lane keeping assist Traffic sign assist Active brake assist Crosswind assist Cruise control High Performance LED headlights Rain sensor Electrically foldable & heated exterior mirrors Seat heating driver & passenger Suspension seat for driver Tempmatic air conditioning Winter package & all-season tires Tire pressure monitoring 93-liter fuel tank 270° double-wing rear doors Right sliding door Cargo area cladding up to roof height Tie-down rails & LED cargo area lighting Multi-function steering wheel Wireless smartphone charging A particularly complete Sprinter that perfectly combines performance, comfort and safety. Ready for many reliable miles! Auto Viger – Quality, Service and Trust. = Additional Information = General Information Number of doors: 1 Year of construction: 2024 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Front axle: steered Weights Unladen weight: 2,130 kg Payload: 1,370 kg GVW: 3,500 kg Consumption Average fuel consumption: 9 l/100km Fuel consumption in town: 10 l/100km Fuel consumption out of town: 8 l/100km Maintenance APK (Technical Inspection): New TÜV upon delivery Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: 12 months Further information Please contact Lorenz Schoutteet for further information.

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Rcjdpewb E S Ijfx Airsh

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 3,520 kg, lifting power: 1.4 kg/m, lifting height: 2,538 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 3514 – The powerful wheel loader for versatile applications Advantages of the H&R 3514 Articulated Loader Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with an adjustable seat and steering column, diesel auxiliary heating, and rearview camera. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard 150 cm bucket and pallet fork • Powerful and versatile – versatile • Compact design ensures good maneuverability • Comfortable cab with heating, ventilation, and a diesel auxiliary heater • Joystick with electric gearshift for precise control Rcjdsrkmfxopfx Airsh • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp Emissions class: Euro 5 Lifting height: 2538 mm (bottom edge of standard pallet fork) Unloading height: 1950 mm (standard bucket tipped out) Lifting capacity: 1400 kg Wheelbase: 2200 mm Tires: 20.5-70 R16 Dimensions: 3870 x 1750 x 2570 mm Weight: 3520 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control HURCO WINMAX (Graphics, Touchscreen) Max. swing diameter 335 mm Max. turning diameter 305 mm Distance between centers 477 mm Spindle bore D52 mm Chuck size 203 mm Turret 10 stations (BMT) Spindle speed 4,800 rpm Power 11/14 kW Machine weight approx. 3,950 kg Dimensions approx. 3,000 x 2,300 x 2,000 mm Accessories - Hydraulic tailstock - Coolant system - Built-in tool setter - Workpiece chuck - D200 3-jaw hydraulic chuck with jaws - Parts catcher - Machine lamp - Chip conveyor The machine is in very good condition. It can be inspected under power from calendar week 46 (CW 46) in our showroom. Rcjdpfj Agadksx Aireh

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Rcjdpfxj Af E Hhj Aireh Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine. Rcodpfx Ao Af E Hueirjh

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Rjdpfx Ae Af E Eweiroch Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA Rcedpfx Aj Aguk Njireh - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade arbor diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * top: - anti-kickback pawls (barrier to prevent material from recoiling) 2 rows - sliding roller, metal, pressure roller - anti-kickback pawls/latches - sliding roller, metal, pressure roller - saw arbor - 2 smooth, metal sliding rollers * bottom: - guide strip - anti-kickback pawls/latches - track - central electric track lubrication - stepless feed rate adjustment - feed motor 1.1kW - main motor 25kW - diameter of the dust extraction nozzle 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13470 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number: 7878 TECHNICAL DATA - track width: 220mm - shaft width: 200mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with clearance: 1100mm - table length: 1640mm - from above: - row of pawls/ejectors - 1 metal feed roller - pawls - metal feed roller - shaft with blades - 2 metal feed rollers - from below: Rcjdpfx As Aguicsiroh - guide rail - pawls/ejectors - track - stepless feed speed adjustment via a frequency inverter - feed motor: 1.1kW - main motor: 29kW - central track lubrication - dust extraction nozzle diameter: 180mm - overall dimensions (L/W/H): 2000x1600x1500mm - weight: 1480kg ADVANTAGES - Made in Italy - Multi-blade saw, used - Very good condition Net price: 27,900 PLN Net price: 6,488 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations.)