Used Continuous Furnace for sale (4,927)

Year of construction: 2013, condition: used, Used Riehle Conveyor Fryer, DLA600-3 Series Iodpfx Ajw Ngu Somysat The DLA 600 conveyor fryer is designed for continuous frying of products, ensuring consistent frying quality. Products are placed onto the loading belt and automatically conveyed into the frying tank. The conveyor belt then transports the product fully submerged throughout the length of the fryer tank up to the end. Submersion frying notably reduces frying times by up to 40%. The fryer can be used not only with oil; water, soups, sauces, marinades, syrups, etc. can also be used. Technical data: - Length: 2900 mm - Fryer tank length (frying zone): 2350 mm - Working width: 585 mm - Max product height: 55 mm - Maximum fat/oil volume: 260 L - Frying time in minutes: 55 sec – 11 min (depending on product type) - Power: 56 kW

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time. Iaedpfx Amjy Nyqzeyst

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. Iaedpfxjy Eyv Ao Amyjt The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, For sale is a powerful Selmi Tank 400, the gold standard for professional chocolate processing. This machine is specifically designed for the efficient melting and precise tempering of large volumes of chocolate (up to 400 kg). The unit comes from a very well-maintained production environment, has always been handled properly and cleaned regularly. It is ready for immediate use and ideal for operations looking to expand or automate their capacity. Technical Highlights & Features: - Capacity: 400 kg – ideal for continuous supply of enrobing machines or dosing stations. - Heating System: Gentle melting via a precise water bath system (bain-marie), preventing scorching of the chocolate. - Agitator: Integrated, heated agitator for a perfectly homogeneous mass. - Controls: Digital temperature control for maximum precision in temperature management. - Hygiene: Entirely made from high-grade stainless steel, easy to clean and HACCP-compliant. - Connection: 400 V (three-phase power) for industrial performance. Iedey Nnifspfx Amysat Condition & Maintenance: - Excellent overall condition. - Fully functional and removed from ongoing production. - No maintenance backlog – the machine has always been used carefully and properly maintained. Why this Selmi Tank? The Tank 400 is renowned for its durability and reliability. It delivers substantial time savings compared to smaller batch mixers and ensures consistently high product quality. Location: Pulheim near Cologne Important information for buyers: - Inspection and function test on site available at short notice by arrangement. - Loading with forklift can be organized on site. - Package offer: I am also selling a JM Tronic dosing scale and a Bear Varimixer AR100S. An attractive package price is possible if purchasing multiple machines!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 60 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C Ijdpfx Amoy H E Ndeysat 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Condition: used, Pit protective gas furnace (crucible furnace) Max. temperature: 1,150 °C Usable space: Ø 900 x 1,050 mm Batch weight: up to 1.5 t Iodpfx Amjy Iw Dceyjat Atmosphere: N₂ / H₂ / NH₃ / CO₂ 2 retorts 2 cooling stations Bar controller SE 607 Complete gas dosing station for operation of 2 retorts

Condition: excellent (used), Shaft air circulation furnace / shaft annealing furnace Suitable for tempering and annealing up to 8 t Max. temperature: 850 °C Working dimensions: Ø 1,900 x 1,900 mm Charge weight: up to 8 t Ijdpfoy Iwxyjx Amysat Atmosphere: air Stange controller SE 607

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Iaodogtxuqepfx Amyjt Temperature up to 1150 c

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Iajdpfx Asxwqhkomyet Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h 75 kg With base frame

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in-stock item, available for immediate delivery, excellent condition Resistance-heated system with gas-tight furnace muffle - Continuous operation Tmax 800°C - Maximum temperature approx. 900°C (under protective gas) - Rod program controller SE-402 - 3-zone heating Isdoyxlwropfx Amysat - Gas supply system: 2 different protective gases and fuel gases - Gas circulation - Vacuum system - Internal muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle volume approx. 722 liters - Max. charge weight approx. 1,000 kg - Two-stage rapid cooling with frequency converter - Flare device with flame monitoring - Sight glass DN150 - Max. gas operating pressure 7 mbar - Mains voltage 400V, 3 phase, N, PE - Heating power 70 kVA - Rated current 3x97A - Weight 1,900 kg - Furnace external dimensions (W x H x D): 1,700 x 1,950 x 2,750 mm - Control cabinet dimensions (W x D x H): 510 x 1,360 x 500 mm - Operating instructions, circuit diagrams, CE declaration The furnace is offered refurbished. Electrical inspection including measurement protocols. Inspection at our warehouse by appointment! Applications: Annealing, ashing, boriding, brazing, bright annealing, calcining, carburizing, debinding, dewaxing, graphitizing, carbonizing, heat treatment, nitriding, nitrocarburizing, reduction, sintering, soft soldering, stress relieving, low-stress annealing, surface coating, tempering Furnace, furnaces, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, nitriding furnace, tempering furnace, hardening furnace, chamber furnace,

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: #20206, overhauled, delivery time 3 weeks, with 12 months warranty - Internal dimensions (W x D x H): 1200 x 1950 x 1000 mm - Capacity: 2300 litres - Tmax: 1280°C Iodpoyk U Iisfx Amyjat - Siemens S7 control system with touch panel - 2 kiln cars for interchangeable use - Kiln cars equipped with heavy-duty rollers and steering drawbar, fully mobile on the workshop floor, completely overhauled - Multi-zone design (3 zones) - Automatic exhaust dampers / intake air fan - Separate control cabinet - All contactors and thyristor controls replaced with new - TWB with own type S thermocouple, new - All furnace heaters replaced with new - Control cabinet fan and air supply fan new - Power: 130 kW - Current consumption: 190 A - Furnace weight approx. 2500 kg + each kiln car 1000 kg - DGUV V3 safety inspection up to date with protocol - Documentation, CE declaration, wiring diagrams included We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing in our warehouse available on request! Kiln car furnace, bogie hearth furnace, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace.

Condition: used, doboy BD-V continuous sealer machine Isdpfx Ajw Hy N Eemysat

Condition: excellent (used), Year of construction: 2020, Composition: • Stainless steel mixing tank with agitator • Additive tank with pump • 5 solid material feeders (flour, rye, etc.) • Horizontal screw mixer • Integrated CIP cleaning system • Complete sanitary piping system • Process pump • Full electrical panel with recipe control Power supply: 380-400V Documentation available Iasdpfx Aoyyv I Djmyjt

Condition: good (used), MONDOMIX B-25 Industrial Aerator – Complete line with hopper and pump. Capacity: 250 - 1,000 liters per hour. Max. working pressure: 10 bar. Main aerator with pressurized mixing chamber. Industrial control panel with parameter adjustment. Stainless steel feeding hopper. Product pump (continuous feed). Auxiliary cooling system. Fully interconnected installation. Overrun (aeration) control. Pressure and process regulation. Entirely stainless steel construction. Continuous operation (industrial production). Robust equipment, European made. Power supply: 380V three-phase. Iasdpfxjyyvm To Amyst

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Iedpfsy E S E Aex Amyeat

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Iodpjy E S E Nefx Amyjat

Condition: new, Year of construction: 2026, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically Iasdjfhv Tcepfx Amyet 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Iedsw Hqldjpfx Amyoat It is possible to heat flat bars, round rods, or square rods.

Year of construction: 2012, condition: used, Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: Iaedelw A Emjpfx Amyjt 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Iedpfxjx Ap N Re Amysat Sublocation - Heat Treatment area.

Condition: good (used), Internal item no.: 25121 Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Iodpfx Ameyxpdcsyoat Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Condition: ready for operation (used), Heraeus MR 170 E Muffle Furnace, Annealing Furnace, Oven Iedsynhm Hopfx Amysat 1000°C Internal dimensions: 295mm x 175mm x 95mm (D x W x H) You are welcome to arrange a viewing. We can organize affordable shipping for you upon request! You will receive a proper invoice. For foreign customers, a net invoice can also be issued provided a valid VAT ID is supplied. Sale subject to prior sale. Visit our shop to see more of our offers. The listed company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical data and errors in the article description may occur and are subject to change.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Completely Overhauled, Very Good Condition, Available for Immediate Delivery, 12-Month Warranty - Max. Temperature: 1300 °C - Internal Dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 Liters - Separate Main Switch - 5-Sided Heating - Intake and Exhaust Air with Dampers, Electrically Operated via Belimo Actuators - Intake Air Fan with Frequency Converter, Controlled via Controller - JUMO Control System, Switchable to Other Languages - Additional Drag Element Type S for External Recording - Net Weight: 250 kg - Power Consumption: 18 kW - Current Draw: 26 Amps - Connection Voltage: 3/N/PE 400VAC - Connection Type: Prepared for Hardwired Installation, 32 A Plug - Documentation, CE Declaration - Electrically Tested and Supplied with Current DGUV Test Report Inspection by Appointment. Keywords: Furnace, Furnaces, Annealing Furnace, Industrial Furnace, Chamber Furnace, Kiln, Curing Oven, Tempering Furnace, Laboratory Furnace, Hardening Furnace Ijdpfx Asx U Ekdemyoat

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Iasdewi Ry Hopfx Amyst Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Iasdpfx Aowg Sgcemyst Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.