Used Coolant Purification System for sale (4,275)

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required Giodpfx Ajx Hdq Tsh Hel - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Gsdsu Nit Ropfx Ah Hsil Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231463, Machine Designation: CNC Short-Turning Lathe Gsdpox Tftvefx Ah Heil Manufacturer: Index Model: ABC Year of Manufacture: 2017 Control System: Fanuc 32i-B Operational Status: Fully operational Operating Hours: approx. ___ hours Technical Data Spindle Bore: Ø 42 mm Travel and Feed Data: X-Axis Travel: approx. 90 mm Z-Axis Travel: approx. 280 mm Rapid Traverse X: approx. 27 m/min Rapid Traverse Z: approx. 36 m/min Upper Turret (Main Tool Carrier): Number of Stations: 8 (1 synchronizable) Tool Mount: VDI 25 Capable of powered tooling Lower Turret: Number of Stations: 6 Non-driven Rear Side: 5 stations for back-working operations Simultaneous Machining: Up to 3 tools at the same time Coolant System & Chip Conveyor Bar Feeder: IRCO ILS MUK 7012-II, Year 2015 Accessories / Tooling / Manuals Machine Dimensions & Weight Machine: approx. 2830 × 1500 × 2200 mm, Weight: approx. 3,500 kg Coolant System & Chip Conveyor: approx. 1600 × 1250 × 1780 mm, Weight: approx. 680 kg Bar Feeder IRCO ILS MUK: approx. 1800 × 1000 × 1280 mm, Weight: approx. 650 kg The machine is fully operational and in good used condition. For further information or to arrange a live demonstration under power, please do not hesitate to contact us. All technical specifications and details are subject to change and error. Subject to prior sale.

Condition: new, Year of construction: 2026, Vertical Turning center SCR 50 2S Turning Center’s Specifications Nominal Turning Envelope Giedpfshh Dnxsx Ah Hel Faceplate Diameter 4.500 mm Machining Diameter Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without ) Machining Heights 2.100 mm /3500 mm Work Piece Weight 30.000 kg / 50T Nominal Turning Travels X & U - Axis Ram Carriage From -100 mm To 2.600 mm Z and W - Axis Ram 1.250 mm / 1700 mm Faceplate Diameter 4.500 mm/Normal face plate with T-slots Jaw chucks height 200 mm Work Table Speed: 0-50rpm Power Continuous S1 96 kW / 2X75kW Torque Continuous S1 130,000 Nm / 320,000Nm Turning main drive mechanism Gear box reducer ZF and belt transmission Z & W - Axis Ram Turning Ram - Left and Right side Ram Size 250 by 250 mm or bigger Tool holder type KM 63 Tool Storage (ATC) No. of Tool storage 2 Tool Storage, left and right sides Stations qty 12 stations per each tool storage Stations type Turning toolholder ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum tool weight 50 kg Maximum tool size 250 x 150 mm X 700 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Z-Axis Ram Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Axes Rates X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min X, U And Z, W-Axes Rapid Rates 6,000 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -external coolant (turning) -internal Filtration unit: -type -accuracy 6 bar at 100 LPM 40 bar at 60 LPM Chips conveyor Conveyor type Hinged (Hardox material) Width The conveyors should have a width of 600 mm CNC Control -type -producer Sienumerik One Siemens / Fanuc oiF

Condition: excellent (used), Year of construction: 2011, For sale are two superbly maintained thread rolling machines from a German mechanical engineering company. The systems are fenced and both networked with KUKA automation (robot), but can of course also be operated as standalone machines. The complete photo collection is available upon request. Technical Data Designation: P15 CNC Thread Rolling Machine Manufacturer: PEE-WEE Inventory No.: P10.0014 Factory No.: P10.0014 Year of manufacture: 2010 Delivery date: (not filled in/not legible in the picture) Settings / Performance Rolling force, steplessly adjustable: 1,000 – 15,000 Feed rate, steplessly adjustable: 0.5 – 6 mm/s Rolling time, steplessly adjustable: 0.15 – 30 s Pause time, steplessly adjustable: 0.15 – 30 s Rolling Spindles / Tools / Geometry Spindle diameter: 54.0 mm Spindle mount length: 170 mm Width of keyway in spindle: 12.0 mm Height of key above spindle: 2.5 mm Min. distance between spindles: 130 mm Max. distance between spindles: 230 mm Stroke of spindle slide: 100 mm Max. tool diameter: *200 mm Min. tool diameter: *130 mm Machine bed height: 800 mm Spindle height above bed: 160 mm Support bearing height: 110 mm Spindle speeds: 20 – 80 rpm *Note from datasheet: 'Specified value may vary' (e.g. depending on fixture setup/workpiece diameter). Specifications / Workpiece Data Min. rollable workpiece diameter: *2 mm Max. rollable workpiece diameter: *50 mm Max. thread length plunge type: 170.0 mm Max. thread length through-feed: 2000 mm Max. thread pitch: 4 mm Max. pitch for serrations: 1.5 mm Gisdpfsx Tnq Dex Ah Hol Material strength (note): up to 70 kg/mm² (as per datasheet line) Installation Dimensions / Weight / Floor Load Footprint: approx. 1,500 × 1,200 mm Height: 2,800 mm Weight: 2,800 kg Ceiling/floor load: approx. 1,560 kg/m² Electrics / Supply Mains connection: three-phase supply Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Total power consumption: 16 kW Motors (as per table) Rolling spindle drive motor Manufacturer: Weg Lenze Type: 3N132M-6 Power: 5.5 kW Speed: 860 rpm Voltage: 400 V, Frequency: 50 Hz Coolant pump with motor Manufacturer: Brinkmann Type: TB40/220+001 Power: 0.12 kW Speed: 2,700 rpm Voltage: 400 V, Frequency: 50 Hz Pressure pump motor Manufacturer: MEZ Type: 7AA132MM4 (legible as such) Power: 7.5 kW Speed: 1,455 rpm Voltage: 400 V, Frequency: 50 Hz

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters Godpfjuf Sv Dex Ah Hjil electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Giedpox S Edlsfx Ah Hel Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm Gjdju Nimqopfx Ah Hjil revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Godowynrzspfx Ah Hjil Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: used, turning diameter 320 mm turning length 800 mm swing diameter over bed slide 180 mm turning speeds 20 - 3200 U/min spindle bore 36 mm quill travel 160 mm Gjdpfx Asx Tu I Aeh Heil quill: MK 3 machine weight ab. 1200 kg range L-W-H 2000 x 950 x 1600 mm Equipment: - 3-jaw chuck FORKARDT Ã?160 mm - MULTI-FIX quick-change holder with inserts - Coolant device - Lathe chuck guard - Change wheels - Chip back panel - Machine light

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min Giedpfx Ahoxbtqie Hsl travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: new, Year of construction: 2024, ALZMETALL column drilling machine AB 34 iTRONIC drilling capacity in steel 34mm, spindle speed: 100-1800 rpm, Short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable support: 615x430mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min. / max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: 7" TFT LCD display with touch function Thread cutting device Infinitely variable speed adjustment Spindle protection Three separate buttons for clockwise rotation - counterclockwise rotation - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 Volt Protection class IP 54 Motor insulation class "F" (155°) Electromagnetic feed overload protection Machine oil initial filling Giedpoiqyixjfx Ah Hsl Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light Pos. 12. Coolant system A Pos. 24 Foot switch for thread cutting Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be viewed at our premises by prior arrangement.

Condition: ready for operation (used), Year of construction: 2008, This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Application Types Gedpfx Aex S Skxoh Hoil Milling

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control system: Mazatrol 640 MT Pro Travel distances: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speed of the axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm COUNTER SPINDLE Drive power: 26 kW Max. torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Gedexy Nzujpfx Ah Heil Tool magazine: 80 stations (Capto C6) Coolant/chip removal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure levels PLC - Dual change filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Synchronous counter-rotation of turning and milling spindle - C-axis 0.0001 degree (counter spindle) - Overload monitoring system for the spindle and axis feed system - Automatic ON/OFF with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1,500 U) - Hand type D3 (clamp jaws types A, B, C, D, E) - Maximum workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at the chuck CONTROL OPTIONS - Cylindrical interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous tapping, MAZACC2D, - EIA/ISO, tool length compensation - Fully programmable B-axis 0.0001° - Software for 5-axis simultaneous mode - For main and sub spindle 3-jaw quick-change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Giedpfx Ajwyvc Uoh Hol Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table width: 700 mm, table length: 1,600 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, spindle nose: Iso 40, tool length: 250 mm, tool diameter: 75 mm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Gijdpfx Asrkn Iioh Hol Alarm light & work light

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm Gisdpfxox Sw Ngo Ah Hel - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, Gisdpfx Ahsiqkc Ij Hsl table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Year of construction: 2004, condition: used, machine/vehicle number: BM1020-7043, Vertical machining center with 3 axes AWEA BM1020 FANUC 0I-MC Accessories: Chip conveyor with screw conveyor Remote electronic handwheel Gjdpfxogay E Is Ah Hjil Piece washing gun Automatic high pressure coolant system pressure through the spindle line

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Gedpfox Hrumex Ah Hjil Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table width: 650 mm, table length: 1,500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, spindle nose: Iso 40, tool length: 250 mm, tool diameter: 75 mm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Gsdpfx Asrg Htpsh Hoil Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle bore: 40 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, used L+Z lathe GDW type MS-175, center height 175mm, center width 800mm, spindle speeds 50-2500 rpm, spindle bore 40mm, 2-axis digital display ACU RITE, 1x three-jaw lathe chuck Ø 200mm, Multifix steel holder size B, chuck guard electrically secured, coolant pump. The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately. Godpfx Aevvhfnjh Hoil

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table width: 650 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, spindle nose: Iso 40, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7 g, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: 4th axis interface Air blow system Left side auger chip conveyors Gsdpsrhi Rkefx Ah Hjil Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: good (used), functionality: fully functional, spindle bore: 36 mm, center height: 155 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Used Weiler Condor lathe, No. 7939, Center height 155mm, Center width 800mm, Spindle speeds 12-2800 rpm, spindle bore 36mm Gijdpsv R Tdxefx Ah Hol Accessories: 1x RÖHM three-jaw chuck Ø 160mm, Multifix base body size B with 2 inserts, keyless drill chuck, live center, and coolant system. The machine is in stock at our facility in 71334 Waiblingen-Beinstein and is available immediately.

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Pallet magazine with 10 stations, automatic tool changer with 199 stations. Gsdpfoku A A Hox Ah Hjil Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.