Used Cooler for sale (1,509)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg Hjdpfxevllxde Abtet The radiator has been technically inspected, fully functional

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: AR-D170L2, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, Unit, Century absorption chiller The unit is currently gassed with nitrogen and has lithium bromide, the whole was disconnected from the installation due to a change in technology, but in a fully functional state. The cooling capacity of the device was rated at 560kW, but after failures it can be about 540kW. In total, we had to plug 4 tubes, thus weakening the unit's power, but this is only a few percent. Hedpfx Aewl Dzcebtet Since November 2024, the unit has been disconnected from the installation and not used.

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit Hedpfszvli Hex Abtet 2019, four fan unit, see plate for full spec, 3Ph

Year of construction: 2018, condition: new, functionality: fully functional, New oil cooler Alfa Laval rated capacity at 64,5/57,5C° = 277 KW Flow rate 80m3/h Hodpjxu Eb Hofx Abtjt 3 Fans, 845rpm, 0,77KW each Several units available

Condition: excellent (used), Rehsler cooler consisting of: Industrial cooler, refrigeration unit Chiller Danfoss MTZ64HM4 air conditioning unit Hsdpfszlkwuex Abtet Condenser 125, 2 fans, d=450 mm, 230V, 3.6 A Conversion of chilled water system

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room In good working condition Chiller Room dimensions 5.4mtr x 4mtr Spiral Cooler 660mm wide wire mesh belt Hsdpon Tmh Ssfx Abtst 13 floors high, 170mm high between floors Complete with refrigeration compressor. In use at present

Condition: good (used), Year of construction: 2001, functionality: fully functional, KKT Kraus chiller model KLC-S 17T-RS with current refrigerant R407c. The water chiller has been tested at full load against a counter-heater, with no faults detected. Net price ex works, packed and loaded onto truck. Hedpfx Abjyk Hlaotjt

Condition: used, Kahl - Wood Pellet cooler Hsdpfjv R Tdfsx Abtet 3-5 tons per hour

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Hsdpfxoztq Hxj Abtjt Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: used, mileage: 6,12,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum side boards, * Dimensions i.L. 6,280mm x 2,480mm x 490mm, * Raised front wall, * Storage box, Hodpfx Aezlvnfsbtjt * Anchor rails in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Radio remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/co-driver seat, sprung comfort seat including horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunction steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered rear axle, * Engine 16.0 L - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB * Permissible total weight 32.0 t Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim at the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We are interested in taking your commercial vehicle/construction machine in trade. If a new TÜV (German vehicle inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2005, Used Geelen Counterflow Cooler Refurbishment upon agreement Hjdpfoyrrptex Abtot Other sizes also available, such as 1.9 x 1.9 and double-deck

Condition: new, Year of construction: 2025, functionality: fully functional, FREEZERS AND COOLERS for supermarkets, mini-markets, coffee shops, etc. Plug-in and ready for use, freezers feature automatic HOT GAS defrosting, fitted with globally-renowned cooling equipment brands, available from 1 to 4 doors. Equipped with heavy-duty wheels for easy installation and removal. FULL GLASS doors with triple glazing for freezers and double glazing for coolers, featuring anti-mold resistant coating. Colored RAL 9005 (full BLACK), R290 refrigerant, with a fully adjustable electronic digital thermostat. Hsdpfx Absx I I Hustjt

Condition: ready for operation (used), KLH Kältetechnik W15.HL6 Peripheral Unit Air-Cooled Water Chiller Cooling Device Year of manufacture: 2010 Dimensions: 1100mm x 800mm x 1620mm (L x W x H) Weight: 288 kg You are welcome to arrange a viewing appointment. Hedpfx Asxxa Hrjbtst We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data deviations as well as errors in the item description may occur and are reserved.

Condition: excellent (used), 447 USED Automatic bulk raw material dosing system Reimelt. Hsdpfx Abozxnttstjt EQUIPMENT: - 4 internal silos for flour, - 6 tanks, silos for mixes or flour. - 6 tanks for micro-raw materials, - mixers, - pumps, - raw material transport pipes, - bowl dosing station (hopper), - flour catcher, - water mixer, - water cooler, - automation control, THE SET IS A COMPLETE INSTALLATION. Paid options available: transport of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2013, condition: excellent (used), 1 x oil cooling unit Deryun Hodpokhigfefx Abtjt DJ 2.5 RSA-400V-CE Year of manufacture: 2013 in very good condition. The oil cooler can be inspected.

Condition: used, mileage: 6,12,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum sideboards, * Dimensions: approx. 6,280 mm x 2,480 mm x 490 mm, * Raised front panel, * Storage compartment, * Recessed strips in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: * 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/passenger seat: comfort suspension seat incl. horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunctional steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, Hsdpfewpbgqox Abtet * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered trailing axle, * Engine 16.0 liters - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB (Central Register of Road Vehicles) * Permissible total weight 32.0 t Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV (Technical Inspection Association) inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 84 kg, input voltage: 230 V, We offer a brand new, unused Güntner dry cooler, complete with an independent temperature control system featuring fan speed regulation. This unit is typically used to dissipate heat from a process or system into the surrounding air without using water. It is suitable for applications where a closed water/glycol circuit needs to be cooled. Hjdezl H A Tjpfx Abtst

Condition: new, Coolers, models Kaeser, Atlas Copco, Compair COOLER – Atlas Copco GA all models Hodpox I E Ayofx Abtst COOLER – KAESER all models OIL COOLER

Condition: like new (used), Rittal Type: SK 3336.509 Technical details: Voltage 3/400V 50 Hz Max. current 6.7 A Inrush current 30.4 A Nominal cooling capacity 5040 W Max. power consumption 3340 W Refrigerant R134a 2.2 kg Hedpfxszh Dnxe Abtot Temperature range +15 / +43 °C 150 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 1997, condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Manufacturer: Deltatherm, water cooler Type: DE-HI -Power: 1.7 kW -Individual components: see photos -Dimensions: 1300/800/H1760 mm -Weight: 321 kg Hjdpfxjzcwu Nj Abtot

Condition: excellent (used), Year of construction: 2006, CONTINUOUS FLOW WATER CHILLER LANGHEINZ WKG 90 Cooling capacity: With an inlet temperature of approximately 17.5°C and a flow rate of 7.5 liters per minute, the chilled water extracted has the following temperatures: 10 liters: +1.9°C 20 liters: +2.7°C 30 liters: +3.2°C Peak cooling capacity: 180 liters per hour Continuous cooling capacity: 90 liters per hour Batch size: up to 50 liters Hjdjghrmzspfx Abtot with approximately 20 kg of ice storage Electrical connection: 230V/50Hz Water connection: 1/2" Dimensions W x H x D: 950 x 560 x 530 mm

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Hjdpfxsw Ix Dpj Abtot Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: excellent (used), mileage: 59,153 km, power: 450 kW (611.83 HP), first registration: 11/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, loading space width: 2,500 mm, Year of construction: 2016, operating hours: 5,394 h, Equipment: AdBlue, air conditioning, central locking, differential lock, electric window regulation, power assisted steering, retarder, trailer coupling, - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Intarder - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) - Tow hitch Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights Unladen weight: 29,075 kg Payload: 7,925 kg GVW: 37,000 kg Functional Mast: Telescopic (14 sections) Lifting capacity: 30,000 kg Body manufacturer: PALFINGER PK110002-SH G +PJ 170 E PLUS CE marking: yes Condition Technical condition: very good Optical condition: very good # OFFER # SCANIA G450 8x4 flatbed truck with PALFINGER PK 110.002-SH G POWERLINK PLUS + PJ 170 E DPS PLUS JIB + HYDRAULIC WINCH ## Scania G450 8x4 flatbed truck with high-performance crane We are pleased to offer you this excellently equipped Scania G450 8x4 flatbed truck. The vehicle is equipped with a powerful Palfinger PK 110.002-SH G PowerLink Plus crane, a PJ 170 E DPS Plus JIB, and a hydraulic winch. This combination is ideal for demanding lifting and assembly work in the construction industry, mechanical engineering, special transport, the energy sector, and the transport of steel and prefabricated parts. The truck comes from Germany, is in very well-maintained original condition, and is ready for immediate use. --- # Vehicle data Manufacturer: Scania Model: G450 Version: 8x4 flatbed truck Engine power: 450 hp Hodpjzxgmljfx Abtet Transmission: Scania Opticruise automatic transmission Mileage: 59,152 km Origin: German vehicle Condition: Very well-maintained original condition Rims: Original Alcoa aluminum rims --- # PALFINGER Crane ## Type Palfinger PK 110.002-SH G PowerLink Plus Equipped with: * PJ 170 E DPS Plus JIB * Hydraulic winch * Remote control * Additional oil cooler for crane hydraulics * 14-section hydraulically extendable boom * PowerLink Plus system * DPS Plus JIB * Proportional hydraulic control * Modern safety and stability systems --- # Performance data Maximum lifting capacity: 30,000 kg Maximum working height: approx. 36 meters Crane operating hours: 5,394 hours The PK 110.002-SH is one of the most powerful cranes in its class and impresses with its enormous lifting capacity, large reach and highest precision even in demanding lifting operations. --- # Flatbed The Scania has a stable open loading area. ### Dimensions * Length: 500 cm * Width: 250 cm Equipment: * Aluminum side walls * Robust steel floor * Ideal for machine, construction material and special transports --- # Chassis Equipment: * Trailer coupling * Original Alcoa aluminum rims * Additional hydraulic oil cooler * Automatic transmission * Robust and stable 8x4 chassis --- # Weights Technically permissible total weight: 37,000 kg ...

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h Hjdpfezu S Dbjx Abtot • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Hodpfx Aozv Rgwebtot Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *